Supply, Installaton, Testing & Commissioning Three Phase Control Center Panel and Cutter Pump with Pressure Valve and Pressure Gauge At Dwarka District Devbhumi Dwarka.

Name Of Work : Supply, Installaton, Testing & Commissioning Three Phase Control Center Panel and Cutter Pump with Pressure Valve

and Pressure Gauge At Dwarka District Devbhumi Dwarka.

Item. No. Description of Item Quantities Unit Amount

Supply, installaton, testing & commissioning LV APFC panel consisting of required capacitor

banks for continuous duty to improve P.F. 0.85 1o 0.99 in required steps enciosed in dust &

vermin proof compartment, indoor type, fabricated from CRCA sheet steel with minimum

thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for load bearing members

/ doors & 1.6 mm for internal partitions, minimum degree of protection - IP 42 busbar

chamber, raquired size of Al bus bar / terminais, minimum 10 stage APFC relay, metering,

indicating lamps, push butions complete as per IS: 16636-2017 with latest ammendment &

detailed technical specification and data sheet as under.

Above 50 & up to 100 KVAR: APFC panel consisting following items.

a) 250 A. 50 kA for 1sec. TP. TM based MCCB with spreader terminals & rotary hendle

b) 0-250 A range analogue ammeter of 96 x 96 mm size with selector switch

c) 3nos: 250 / 5A. 10 VA CL-1.0 cast resin type current transformer d) Suitable rating of

MCCB / MCB & Contactors for each capacitor bank

e) Sullable rating APP type cepacitor banks (vacuum impregnated with non-PCB / non toxic

oil, internaily delta connected with built in internal fuses complete with discharge resistances

& terminal cover) of approved make in required steps with well suited detuned reactor is

placed in series with each capacitor step. ( e.g. 100 KVAR capacity will be provided in steps

of 2 nos x 5 KVAR, 2 nos x 10KVAR, 2 nos x 15 KVAR & 2 nos

x 20 KVAR) f) Enclosre dimensions: 2100 (H) × 1150 (W) x 600 (D)

Item. No. Description of Item Quantities Unit Amount

Supply. installation, testing & commissioning of sewage submersible, non clog type suitable

for working on three phase, 50 Hz + 3%, 415 V = 10%, AC supply, 1450 RPM synchronous

speed with 3 core flat copper cable from pump to starter panel with cable end terminations,

all supports. clamps pipe fittings along with mechanical seal, bearing bush, strainer etc.

complete set & following M O.C: Casing Cl, Impeller: SS CFSM Wearing ring & Bearing

bush: Bronze. TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS

Supply. installation, testing & commissioning of sewage submersible, non clog type suitable

for working on three phase, 50 Hz + 3%, 415 V = 10%, AC supply, 1450 RPM synchronous

speed with 3 core flat copper cable from pump to starter panel with cable end terminations,

all supports. clamps pipe fittings along with mechanical seal, bearing bush, strainer etc.

complete set & following M O.C: Casing Cl, Impeller: SS CFSM Wearing ring & Bearing

bush: Bronze. TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS

Supply. installation, testing & commissioning of sewage submersible, non clog type suitable

for working on three phase, 50 Hz + 3%, 415 V = 10%, AC supply, 1450 RPM synchronous

speed with 3 core flat copper cable from pump to starter panel with cable end terminations,

all supports. clamps pipe fittings along with mechanical seal, bearing bush, strainer etc.

complete set & following M O.C: Casing Cl, Impeller: SS CFSM Wearing ring & Bearing

bush: Bronze. TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS

Design, Supply. Installation. Testing. Commissioning of Diaphragm sealed Pressure Gauge,

+ or - 1% accuracy, Direct botton 1/2" NPT (M) process connection, IP 67. Glycerine filled,

SS304 Case with Bayonet Type Bezel, SS316 L Diaphragm SS316 Bottom Housing Material,

5 SS 316 Movement material, Aluminium dial with black graduation on white background Micro 3.00 3042.12 Nos

Zero adjustable pointer, neoprene gasket, Blow out disc, shatter proof glass, SS tag plate etc

150 mm dia Size & 0 to 21 Kg/Cm2

Item. No. Description of Item Quantities Unit Amount

I / Weam / are willing to carryout the work at……. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

In words………………….. In words………………………..

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017

Note 5:- GST WILL BE PAID EXTRA AS PER TENDER CONDITION