Jal Jeevan Mission (JJM)-JJM Chirakkadavu and JJM Kanjirappally - Phase 2 Kanjirappally Panchayath

Work Name:Jal Jeevan Mission (JJM)-JJM Chirakkadavu and JJM Kanjirappally - Phase 2-Kanjirappally Panchayath- Construction of 50000L Sump cum Booster Pump House and providing Water supply facilities at Koovapally in Kanjirappally Panchayat and Chirakkadavu Local body - Package 2-Construction of 5.25 LL OHSR at Ponkunnam and 2 LL OHSR at GH Kanjirappally-General Civil Work

te of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately.All work above plinth level upto floor V levelƒ13.21:Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.kg
5.34.1:Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum).5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete‘5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers‘5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts°5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.Š5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)Î5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or morekilogramÑ5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or morem13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)@13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)Š13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new workÚ10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipesï2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.l
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksG
100.36.1:Filling water with 5000 litre tankers fited in lorry and conveying water from a distance of 5 km (average) to the reservoir site and pumping the water into the reservoir of height not less than 3 m using 5 HP diesel engine pump set , hire for tanker lorry, tools and other appliences and cost of water etc. complete. Kilo litre100.41.33:Supplying and fixing 500mm dia C.I. manhole cover with frame (medium duty) charges including all cost, labour charges etc., complete. JOD286036/2023-2024:Conveying and Fixing Wall Casting pipe on floor of TankFOD286037/2023-2024:supply and fixing 100mm CI vent cowl over tank roof\OD286038/2023-2024:Supply and providing lightening arrester with 12 needled nickel coated spike receiver,supporting rod and stand including all accessories as required with positive receiver(45 m receiving capacity),Supply and laying 25x3mm required length of GI strip through epoxy resign cast support,Down conductor through wall vertical run/through parapet,Supply and installation of test joint box fabricated out of 16 SWG CRCA sheet,Supply and laying of 32x6mm GI strip through ground including earth work excavation back filling and jointing etc complete and providing 2 Nos of pipe earthing.q
OD286039/2023-2024:Providing water level indicator assemblying by using float, pully, nylon rope, plumpbob with indiactor lamp, MS board(30cm width) with sufficient depth to show the zero water level and full depth to show the zero water level and full water level , painting 10cm divisions, lettering including cost for clamps, drilling of RCC slabs etc. complete.§OD286040/2023-2024:Providing solar panel with storage battery(upto 10Hour Backup)light two members to 20W LED lamp, including cost of shade, fabricated stand post etc.setG13.71:Lettering with black Japan pint of approved brand and manufactureper Letter per cm heightOD286041/2023-2024:Charges for preparation of Good For Construction (GFC) drawings (both structural & architectural) through an accredited Structural Engineer/Govt. Accredited Agency after conducting Soil Investigation at WTP & OHSR site. The charges include the vetting charges for M/s WASCON, submission of 3 set of minimum A3 size Drawings for vetting by WASCON, soft copy of drawing in AUTOCAD and including any other design consultation charges complete as per direction of Departmental Engineer - In - Charge of the work.†APPENDIX III : Construction of 5.25 LL Capacity OHSR at Ponkunnam-Interconnection with existing Pumping main & Distribution LineÉ
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.Ç
100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock. ¤100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.o
100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.WOD286047/2023-2024:Labour for cutting D.I. pipe with steel saw.350 mm diameter C.I pipeEach CutXOD286049/2023-2024:Labour for cutting D.I. pipe with steel saw.150 mm diameter C.I. pipe¶18.73.2:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :150 mm dia Ductile Iron Double Flanged18.30.4:Providing flanged joints to double flanged C.I./ D.I pip

es and specials, including testing of joints:150 mm diameter pipe¶18.73.3:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :200 mm dia Ductile Iron Double Flanged18.30.5:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:200 mm diameter pipe¶18.73.4:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :250 mm dia Ductile Iron Double Flanged18.30.6:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:250 mm diameter pipe¶18.73.5:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :300 mm dia Ductile Iron Double Flanged18.30.7:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:300 mm diameter pipeÅ100.12.9:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.ê100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.ì100.31.2.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class II.ì100.31.2.5:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 200mm diameter, Class II.ì100.31.2.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class II.ì100.31.2.8:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 350mm diameter, Class II.ì100.31.2.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class II.ú100.32.4:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 80mm Double Acting Air Valve.|18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm diaquintalqOD286051/2023-2024:Cost of PVC specials (Bends, Tee, coupler, Tailpiece, end caps, solvent cement,CID/CIR etc )L.S×OD286052/2023-2024:Supplying and fixing of an electro magnetic flow meter (with solar power) conforming to protection level of IP -68 for the flow sensor and IP &; 67 for transmitter and having an accuracy level of 0.5% with LED/LCD display unit. The flow meter should have the housing (flow sensor) made of SS304/carbon steel with anti corrosive protection and inside layer should be made of hard rubber neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer with the provision for wireless transfer through GSM. The manufacturers have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. It shall be battery powered with provision for solar panel for charging the battery,-24 Hrs back up (As per Circular noKWA/HO/SP-4014/2012/Flow meters & Soft Starter dated 5/9/2012) 200 mm dia. test certificate from FCRI Palakkad. 2-year warranty. ÊOD286053/2023-2024:Supplying and fixing of an electro magnetic flow meter (with solar power) conforming to protection level of IP -68 for flow sensor and IP – 67 for transmitter and having an accuracy level of 0.5% with LED/LCD display unit. The flowmeter should have the housing (flow sensor) made of SS304/carbon steel with anti corrosive protection and inside layer should be made of hard rubber neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer with the provision for wireless transfer through GSM. The manufacturers have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. It shall be battery powered with provision for solar panel for charging the battery,24 Hrs back up (As per Circular noKWA/HO/SP-4014/2012/Flow meters & Soft Starter dated 5/9/2012) 350 mm dia.Test certificate from FCRI palakkad.jOD303626/2023-2024:Interconnection work With Existing 350mm DI pipe Oulet with New 300mm DI OutLet pipe.bAPPENDIX IV -Construction of 5.25 LL Capacity OHSR at Ponkunnam-MS Pipes And Specials Fabrication A
100.37.6.1:In situ fabrication of M.S. pipes of size 150mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.g
100.37.6.2:Fabricating M.S. flanges of diameter 150mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.Ú100.37.6.3:Cutting 150mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.É100.37.6.5:Grinding cut and weld edges of 150mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.ü100.37.6.4:Welding 150mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.A
100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.g
100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.Ú100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.É100.37.7.5:Grinding cut and weld edges of 200mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.ü100.37.7.4:Welding 200mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.A
100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabricati

on charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.g
100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.Ú100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.É100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pi

搠牵湩⁧慦牢捩瑡潩潷歲椠据畬楤杮愠汬氠扡畯⁲湡⁤楨敲挠慨杲獥漠⁦潴汯⁳瑥⹣‬潣灭敬整›潆⁲楰数⁳慦牢捩瑡摥眠瑩⁨洸桴捩⹍⹓瀠慬整⹳ü㄀〰㌮⸷⸸㨴敗摬湩⁧㔲洰䤨䐮⤮䴠匮‮楰数⁳潦⁲慭楫杮戠湥獤愠摮漠桴牥猠数楣污⁳祢朠獡支敬瑣楲⁣敷摬湩⁧慭档湩⁥湩汣摵湩⁧潣瑳漠⁦慧⁳湡⁤敷摬湩⁧潲獤‬污慬潢牵愠摮栠物⁥档牡敧⁳景琠潯獬攠捴Ⱞ挠浯汰瑥㩥䘠牯瀠灩獥映扡楲慣整⁤楷桴㠠浭琠楨正䴠匮‮汰瑡獥栮
〱⸰㜳ㄮ⸰㨲慆牢捩瑡湩⁧⹍⹓映慬杮獥漠⁦楤浡瑥牥㌠〵浭甠楳杮ㄠ洲桴捩⹍⹓瀠慬整椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散挠慨杲獥漠⁦⹍⹓瀠慬整‬污慦牢捩瑡潩档牡敧ⱳ挠慨杲獥漠⁦慰湩楴杮琠敨猠整汥眠牯楷桴琠潷漠⁲潭敲挠慯⁴敤畬數洠汵楴猠牵慦散瀠楡瑮琠楧敶愠癥湥猠慨敤漠敶⁲湡甠摮牥挭慯⁴景瀠楲敭⁲瑥⹣‬潣灭敬整›潆⁲楰数⁳慦牢捩瑡摥眠瑩⁨洸桴捩⹍⹓瀠慬整⹳Ł㄀〰㌮⸷⸹㨱湉猠瑩⁵慦牢捩瑡潩景䴠匮‮楰数⁳景猠穩⁥〳洰䤨䐮⤮甠楳杮㠠浭琠楨正䴠匮‮汰瑡⁥湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥档牡敧⁳景䴠匮‮汰瑡ⱥ愠汬映扡楲慣楴湯挠慨杲獥‬档牡敧⁳景瀠楡瑮湩⁧桴⁥瑳敥潷歲眠瑩⁨睴牯洠牯⁥潣瑡搠汥硵⁥畭瑬⁩畳晲捡⁥慰湩⁴潴朠癩⁥湡攠敶桳摡⁥癯牥愠湵敤⵲潣瑡漠⁦牰浩牥攠捴Ⱞ挠浯汰瑥⹥ŧ㄀〰㌮⸷⸹㨲慆牢捩瑡湩⁧⹍⹓映慬杮獥漠⁦楤浡瑥牥㌠〰浭甠楳杮ㄠ洲桴捩⹍⹓瀠慬整椠据畬楤杮挠獯⁴湡⁤潣癮祥湡散挠慨杲獥漠⁦⹍⹓瀠慬整‬污慦牢捩瑡潩档牡敧ⱳ挠慨杲獥漠⁦慰湩楴杮琠敨猠整汥眠牯楷桴琠潷漠⁲潭敲挠慯⁴敤畬數洠汵楴猠牵慦散瀠楡瑮琠楧敶愠癥湥猠慨敤漠敶⁲湡甠摮牥挭慯⁴景瀠楲敭⁲瑥⹣‬潣灭敬整›潆⁲楰数⁳慦牢捩瑡摥眠瑩⁨洸桴捩⹍⹓瀠慬整⹳Ú㄀〰㌮⸷⸹㨳畃瑴湩⁧〳洰䤨䐮⤮䴠匮‮楰数⁳潦⁲慭楫杮戠湥獤愠摮漠桴牥猠数楣污⁳祢朠獡挠瑵楴杮椠据畬楤杮挠獯⁴景朠獡‬污慬潢牵愠摮栠物⁥档牡敧⁳景琠潯獬攠捴Ⱞ挠浯汰瑥㩥䘠牯瀠灩獥映扡楲慣整⁤楷桴㠠浭琠楨正䴠匮‮汰瑡獥줮〱⸰㜳㤮㔮䜺楲摮湩⁧畣⁴湡⁤敷摬攠杤獥漠⁦〳洰䤨䐮⤮䴠匮‮楰数⁳畤楲杮映扡楲慣楴湯眠牯湩汣摵湩⁧污慬潢牵愠摮栠物⁥档牡敧⁳景琠潯獬攠捴Ⱞ挠浯汰瑥㩥䘠牯瀠灩獥映扡楲慣整⁤楷桴㠠浭琠楨正䴠匮‮汰瑡獥ﰮ〱⸰㜳㤮㐮场汥楤杮㌠〰浭⠠⹉⹄ ⹍⹓瀠灩獥映牯洠歡湩⁧敢摮⁳湡⁤瑯敨⁲灳捥慩獬戠⁹慧⽳汥捥牴捩眠汥楤杮洠捡楨敮椠据畬楤杮挠獯⁴景朠獡愠摮眠汥楤杮爠摯ⱳ愠汬氠扡畯⁲湡⁤楨敲挠慨杲獥漠⁦潴汯⁳瑥⹣‬潣灭敬整›潆⁲楰数⁳慦牢捩瑡摥眠瑩⁨洸桴捩⹍⹓瀠慬整⹳Ů伀㉄㘸㐰⼲〲㌲㈭㈰㨴慆牢捩瑡湩⁧⹍⹓映慬杮獥漠⁦楤浡瑥牥㠠洰獵湩⁧㈱浭琠楨正䴠匮‮汰瑡⁥湩汣摵湩⁧潣瑳愠摮挠湯敶慹据⁥档牡敧⁳景䴠匮‮汰瑡ⱥ愠汬映扡楲慣楴湯挠慨杲獥‬档牡敧⁳景瀠楡瑮湩⁧桴⁥瑳敥潷歲眠瑩⁨睴牯洠牯⁥潣瑡搠汥硵⁥畭瑬⁩畳晲捡⁥慰湩⁴潴朠癩⁥湡攠敶桳摡⁥癯牥愠湵敤⵲潣瑡漠⁦牰浩牥攠捴Ⱞ挠浯汰瑥㩥䘠牯瀠灩獥映扡楲慣整⁤楷桴㠠浭琠楨正䴠匮‮汰瑡獥弮偁䕐䑎塉嘠㨠䌠湯瑳畲瑣潩景㔠㈮‵䱌䌠灡捡瑩⁹䡏剓愠⁴潐歮湵慮⵭慖癬⁥桃浡敢⁲湡⁤湁档牯䈠潬正୳
⸵⸱㨲牐癯摩湩⁧湡⁤慬楹杮椠潰楳楴湯猠数楣楦摥朠慲敤漠⁦敲湩潦捲摥挠浥湥⁴潣据敲整‬硥汣摵湩⁧桴⁥潣瑳漠⁦散瑮牥湩Ⱨ猠畨瑴牥湩Ⱨ映湩獩楨杮愠摮爠楥普牯散敭瑮ⴠ䄠汬眠牯灵琠汰湩桴氠癥汥ㄺㄺ㔺㌺⠠‱散敭瑮ㄠ㔮挠慯獲⁥慳摮㨠″牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩步偁䕐䑎塉嘠㩉潃獮牴捵楴湯漠⁦⸵㔲䰠⁌慃慰楣祴传午⁒瑡倠湯畫湮浡䌭湯瑳畲瑣潩晏䌠浯潰湵⁤慗汬愠摮匠潴敲删潯ɭ
⸲⸱㨱慅瑲⁨潷歲椠畳晲捡⁥硥慣慶楴湯渠瑯攠捸敥楤杮㌠‰浣椠敤瑰⁨畢⁴硥散摥湩⁧⸱洵椠楷瑤⁨獡眠汥獡ㄠ‰煳湯瀠慬湩汣摵湩⁧楤灳獯污漠⁦硥慣慶整⁤慥瑲⁨灵琠〵洠愠摮氠晩⁴灵琠⸱‵Ɑ搠獩潰敳⁤潳汩琠敢氠癥汥敬⁤湡⁤敮瑡祬搠敲獳摥䄺汬䬠湩獤漠⁦潳汩Ć㜀ㄮㄮ刺湡潤畲扢敬洠獡湯祲眠瑩⁨慨摲猠潴敮椠潦湵慤楴湯愠摮瀠楬瑮⁨湩汣摵湩⁧敬敶汬湩⁧灵眠瑩⁨散敭瑮挠湯牣瑥⁥㨱㨶㈱⠠‱散敭瑮㨠㘠挠慯獲⁥慳摮㨠ㄠ′牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥甠⁰潴瀠楬瑮⁨敬敶楷桴䌺浥湥⁴潭瑲牡ㄠ㘺⠠‱散敭瑮㨠㘠挠慯獲⁥慳摮ဩ
〵㘮ㄮ㈮区汯摩戠潬正洠獡湯祲甠楳杮瀠敲挠獡⁴潳楬⁤汢捯獫⠠慆瑣牯⁹慭敤 景猠穩⁥〴㉸砰〲浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸瀠牡⁴⁉景ㄠ㜹‹潦⁲畳数⁲瑳畲瑣牵⁥灵琠汦潯⁲睴敬敶桴捩湫獥⁳〲浣愠摮愠潢敶椠㩮䌠⁍㨱‶ ‱散敭瑮›‶潣牡敳猠湡⥤攠捴挠浯汰瑥⹥Ǝ㔀㌮刺楥普牯散⁤散敭瑮挠湯牣瑥⁥潷歲椠敢浡ⱳ猠獵数摮摥映潬牯ⱳ爠潯獦‬慨楶杮猠潬数甠⁰潴ㄠ〵氠湡楤杮ⱳ戠污潣楮獥‬桳汥敶ⱳ挠慨橪獡‬楬瑮汥ⱳ戠湡獤‬汰楡楷摮睯猠汩獬‬瑳楡捲獡獥愠摮猠楰慲瑳楡⁲慣敳⁳灵琠汦潯⁲楦敶氠癥汥攠捸畬楤杮琠敨挠獯⁴景挠湥整楲杮‬桳瑵整楲杮‬楦楮桳湩⁧湡⁤敲湩潦捲浥湥ⱴ眠瑩ㅨㄺ㔮㌺⠠‱散敭瑮㨠ㄠ㔮挠慯獲⁥慳摮⠠潚敮䤠䥉 ›″牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥䈮㌱㐮ㄮㄺ′浭挠浥湥⁴汰獡整⁲景洠硩ㄺ㐺⠠ㄠ挠浥湥⁴›‴潣牡敳猠湡⥤Č㤀ㄮ㈮债潲楶楤杮眠潯⁤潷歲椠牦浡獥漠⁦潤牯ⱳ眠湩潤獷‬汣牥獥潴祲眠湩潤獷愠摮漠桴牥映慲敭ⱳ眠潲杵瑨映慲敭⁤湡⁤楦數⁤湩瀠獯瑩潩楷桴栠汯⁤慦瑳氠杵⁳牯眠瑩⁨慤桳映獡整敮獲漠⁦敲畱物摥搠慩☠氠湥瑧⁨栨汯⁤慦瑳氠杵⁳牯搠獡⁨慦瑳湥牥猠慨汬戠⁥慰摩映牯猠灥牡瑡汥⥹匮污眠潯敤
⸹⸵⸱㨲牐癯摩湩⁧湡⁤楦楸杮瀠湡汥敬⁤牯瀠湡汥敬⁤湡⁤汧穡摥猠畨瑴牥⁳潦⁲桳瑵整獲映牯搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷‬湩汣摵湩⁧卉⁉慭歲摥䴠匮‮牰獥敳⁤畢瑴栠湩敧⁳牢杩瑨映湩獩敨⁤景爠煥極敲⁤楳敺眠瑩⁨敮散獳牥⁹捳敲獷‬硥汣摵湩⁧慰敮汬湩⁧桷捩⁨楷汬戠⁥慰摩映牯猠灥牡瑡汥ⱹ愠汬挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥ⴠ椠⵮档牡敧㌮‰浭琠楨正猠畨瑴牥ﭳ⸹㠴㈮债潲楶楤杮愠摮映硩湩⁧⹍⹓䜠楲汬⁳景爠煥極敲⁤慰瑴牥湩映慲敭⁳景眠湩潤獷攠捴‮楷桴䴠匮‮汦瑡ⱳ猠畱牡⁥牯爠畯摮戠牡⁳瑥⹣椠据畬楤杮瀠楲業杮挠慯⁴楷桴愠灰潲敶⁤瑳敥牰浩牥愠汬挠浯汰瑥⹥楆數⁤潴漠数楮杮⽳眠潯敤牦浡獥眠瑩⁨慲汷瀠畬獧猠牣睥⁳瑥虣㌱㔮⸰㨱灁汰楹杮瀠楲業杮挠慯㩴楗桴爠慥祤洠硩摥瀠湩牯䜠敲⁹牰浩牥漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲漠潷摯眠牯栨牡⁤湡⁤潳瑦眠潯⥤Ù㄀⸳㈵ㄮ䘺湩獩楨杮眠瑩⁨灅硯⁹慰湩⁴琨潷漠⁲潭敲挠慯獴 瑡愠汬氠捯瑡潩獮瀠敲慰敲⁤湡⁤灡汰敩⁤獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩獮椠据畬楤杮愠灰潲牰慩整瀠楲業杮挠慯ⱴ瀠敲慰慲楴湯漠⁦畳晲捡ⱥ攠捴‮潣灭敬整伮瑳敥潷歲‚㄀⸳ㄶㄮ债楡瑮湩⁧楷桴猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡㩥睔牯洠牯⁥潣瑡⁳湯渠睥眠牯㽫㌱㌮ㄮ㈺‰浭挠浥湥⁴汰獡整⁲景洠硩ㄺ㐺⠠‱散敭瑮㨠㐠映湩⁥慳摮褩⸹㌶㌮债潲楶楤杮愠摮映硩湩⁧卉⁉慭歲摥漠楸楤敳⁤⹍⹓琠睯牥戠汯⁴汢捡楦楮桳‬䈨牡敲祴数 楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥㩥㔱砰〱洠㙭〵㤮ㄮ⸵㨱畓灰祬湩⁧湡⁤楦楸杮㈠〰洠汁浵湩畩污牤灯5䄀偐久䥄⁘䥖⁉›慍湩整慮据⁥景䔠楸瑳湩⁧潐歮湵慮呭湡獫˙㄀⸴㠷䌺敬湡湩⁧景甠摮牥朠潲湵⁤畳灭‬癏牥䠠慥⁤⹒⹃⹃吠湡 湩敤数摮湥⁴瑳条湩⥧椠据畬楤杮搠獩潰慳景猠楬⁴湡⁤畲扢獩ⱨ愠汬愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥吠敨挠敬湡湩⁧桳污潣獮獩⁴潦汬睯湩⁧灯牥瑡潩獮ⴺ⠠⥩慔歮猠慨汬戠⁥浥瑰敩⁤景眠瑡牥戠⁹異灭湩⁧…潢瑴浯猠慨汬戠⁥汣慥敮⁤景猠楬⁴湡⁤瑯敨⁲敤潰楳獴‮椨⥩䔠瑮物⁥畳晲捡⁥牡慥漠⁦桴⁥畳灭猠慨汬琠敨捳畲扢摥琠潨潲杵汨⁹楷桴眠物⁥牢獵⁨瑥⹣愠摮瀠敲獳牵⁥慷桳摥眠瑩⁨慷整⹲⠠楩⥩䌠汨牯湩瑡潩景删䍃椠瑮牥慮畳晲捡⁥祢氠煩極⁤档潬楲敮‮⠠癩 桔⁥牴慥整⁤畳晲捡⁥桳污敢搠楲摥甠楳杮愠物樠瑥楴杮愠摮愠汬氠潯敳瀠牡楴汣獥猠慨汬戠⁥敲潭慶牦浯琠敨猠牵慦散‮瘨 楆慮汬⁹桴⁥畳晲捡⁥桳污敢琠敲瑡摥眠瑩⁨汵牴癡潩敬⁴慲楤瑡潩瑥⹣愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥á㄀⸴㐶ㄮ䘺湩獩楨杮眠污獬眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴慰湩⁴景爠煥極敲⁤桳摡㩥汏⁤潷歲⠠漠敮漠⁲潭敲挠慯獴愠灰楬摥䀠㈠㈮‰杫ㄯ‰煳⥭漠敶⁲牰浩湩⁧潣瑡漠⁦牰浩牥愠灰楬摥䀠〠㠮‰楬牴⽳〱猠浱挠浯汰瑥⁥湩汣摵湩⁧潣瑳漠⁦牐浩湩⁧潣瑡‡㄀⸴㌵ㄮ场污慰湩楴杮眠瑩⁨汰獡楴⁣浥汵楳湯瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲琠楧敶愠癥湥猠慨敤伺敮漠⁲潭敲挠慯獴漠汯⁤潷歲•㄀⸴㐵ㄮ债楡瑮湩⁧楷桴猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥景爠煥極敲⁤潣潬牵琠湡朠癩⁥癥湥猠慨敤伺敮漠⁲潭敲挠慯獴漠汯⁤潷歲M㄀⸴〶刺ⵥ氠瑥整楲杮眠瑩⁨汢捡慪慰慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⹥ÿ㔀⸰⸶⸱㨷潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳ 慆瑣牯⁹慭敤 景猠穩⁥〴㉸砰㔱浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸瀠牡⁴

I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete;12.1.2:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating less than 275 gm/m2
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete9.6.1:Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in-Charge and panelling with panels of:12 mm thick plain grade- 1, medium density flat pressed three layer particle board FPT- I or graded wood particle board FPT-I, IS : 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848:]APPENDIX VIII : Construction of 2 LL OHSR at Kanjirappally Taluk Hospital-Supply of materials|100.98.458:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.e100.98.446:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Double Orifice Type DS2, Size 50mm.w18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore2OD286060/2023-2024:Supply of 100 mm GI Pipe Medium\OD286061/2023-2024:Cost of GI specials (Bends,Tee,coupler, Tailpiece,end caps,CIR/CID etc ),OD286062/2023-2024:Supplying 125mm CID Joint*OD286063/2023-2024:Supply Of 150mm CID Set*OD286064/2023-2024:Supply of 200mm CID SetXAPPENDIX IX : Construction of 2 LL OHSR at Kanjirappally Taluk Hospital-Working chargesÄ5.33.1:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth levelØ5.33.2:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V levelFOD286055/2023-2024:supply and fixing 100mm CI Vent cowl over tank roof]OD286056/2023-2024:Supply and providing lightening arrester with 12 needled nickel coated spike receiver,supporting rod and stand including all accessories as required with positive receiver(45 m receiving capacity),Supply and laying 25x3mm required length of GI strip through epoxy resign cast support,Down conductor through wall vertical run/through parapet,Supply and installation of test joint box fabricated out of 16 SWG CRCA sheet,Supply and laying of 32x6mm GI strip through ground including earth work excavation back filling and jointing etc complete and providing 2 Nos of pipe earthing p
OD286057/2023-2024:Providing water level indicator assemblying by using float, pully, nylon rope, plumpbob with indiactor lamp, MS board(30cm width) with sufficient depth to show the zero water level and full depth to show the zero water level and full water level , painting 10cm divisions, lettering including cost for clamps, drilling of RCC slabs etc. complete.OD286059/2023-2024:Charges for preparation of Good For Construction (GFC) drawings (both structural & architectural) through an accredited Structural Engineer/Govt. Accredited Agency after conducting Soil Investigation at OHSR site. The charges include the vetting charges for M/s WASCON, submission of 3 set of minimum A3 size Drawings for vetting by WASCON, soft copy of drawing in AUTOCAD and including any other design consultation charges complete as per direction of Departmental Engineer - In - Charge of the work.±APPENDIX X :Construction of 2 LL OHSR at Kanjirappally Taluk Hospital- Interconnection work including fabrication MS pipe and specials (2LL OHSR at Kanjirappally Taluk Hospital)¶18.73.1:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :100 mm dia Ductile Iron Double Flanged18.30.2:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:100 mm diameter pipeë100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.ú100.32.3:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 50mm Double Acting Air Valve.ë100.31.2.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class II.[OD286043/2023-2024:Conveying and Fixing Wall Casting pipe(150mm&100mm) on floor of TankXOD286044/2023-2024:Labour for cutting D.I. pipe with steel saw.150 mm diameter D.I. pipe˜OD286045/2023-2024:Grinding cut and weld edges of 150mm DI pipes during fabrication work including all labour and hire charges of tools etc., complete:g
100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.–OD286046/2023-2024:Supplying and fixing of an electro magnetic flow meter (with solar power) conforming to protection level of IP -68 for flow sensor and IP – 67 for transmitter and having an accuracy level of 0.5% with LED/LCD display unit. The flowmeter should have the housing (flow sensor) made of SS304/carbon steel with anti corrosive protection and inside layer should be made of hard rubber neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer with the provision for wireless transfer through GSM. The manufacturers have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. It shall be battery powered with provision for solar panel for charging the battery, (As per Circular noKWA/HO/SP-4014/2012/Flow meters & Soft Starter dated 5/9/2012) 150 mm dia 100.46.1.3:Repairing leaka

ge/breakage of 125mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 100.46.1.4:Repairing leakage/breakage of 150mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints. 100.46.1.6:Repairing leakage/breakage of 200mm A.C. pipeline by cutting and dismantling the damaged pipe portion (up to 1.5m) including charges for earthwork excavation in all kinds of soil including tar / concrete cutting for exposing leak portion of the pipe, operating control valves if any, conveying to the site and cutting new A.C. pipe to the required length, re-jointing the pipeline using C.I.D. Joints, testing the pipeline by operating the valves concerned, and rectifying the defects any noticed and without causing any damages to the existing utilities and refilling the trenches using excavated earth in layers not exceeding 20cm depth including consolidating each layers by ramming, watering, charges for removing surplus soil from work site, including hire for tools and plant, conveyance of tools and materials, bailing out water, providing caution boards, lighting, watching, ribbon fencing, traffic controlling etc., complete as per the direction of Departmental officers excluding the cost of pipe and C.I.D. Joints.ÿOD304633/2023-2024:Interconnection of newly laid 100mm GI Line with existing 65mm/80mm GI pipes with unequal Tee including , welding suitable coupling in place or ,CID/CIR taking connection including cost of necessary specials,earthwork, and all labour ’APPENDIX XI :Construction of 2 LL OHSR at Kanjirappally Taluk Hospital- Valve chamber and Anchor blocks (2LL OHSR at Kanjirappally Taluk Hospital)TAPPENDIX XII : Maintenance of Existing tank ( OHSR at Kanjirappally Taluk Hospital)W
14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)1APPENDIX XIII : Supply of materials( KOOVAPPALLY)F100.98.116:Supply of DI K9 Pipe Conforming to IS 8329/2000, 150mm Dia.)OD286870/2023-2024:supply of 80mm GI Pipe1OD286872/2023-2024:Supply of 150mm GI Pipe medium`OD286871/2023-2024:Supply of GI Specials (Bends,Tee, coupler, Tailpiece, end caps,CID/CIR etc ){100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.a100.98.428:Supply of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.6, Size 80mm.s100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.w18.17.1:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore¡OD286892/2023-2024:Providing and Fixing 80mm Mechanical Flowmeter including specials as per KWA circular -Test certificate from FCRI pakkad.Two year warrenty . ¢OD286910/2023-2024:Providing and Fixing 150mm Mechanical Flowmeter including specials .as per KWA circular -Test certificate from FCRI pakkad.Two year warranty. GAPPENDIX XIV : Construction of sump cum Booster Pump House(KOOVAPPALLY)
2.33.1:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girthç15.9.1:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In Lime Mortart
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil{
2.9.3:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Hard rock (blasting prohibited)+
50.6.6.2:Hollow block masonry using pre cast solid blocks (factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc completew13.9.1:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack woodn
50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood650.9.15.2:Supplying and fixing 300 mm Aluminium aldrop:50.9.15.5:Providing and fixing iron hooks and eyes: 100 mmÒOD287201/2023-2024:Supplying and fitting Stainless steel locking arrangements of approved brand for the main door of Pump house including cost of locking system and other materials, labour charge etc complete.•13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works100.41.34:Supplying and fixing Rectangular C.I. manhole cover 455mm x 610mm with frame (low duty) charges including all cost, labour charges etc., complete. QOD286924/2023-2024:Cost for investigation and design of 50000 litre capacity sumpSOD286923/

k for providing pipe 50mm to 100mm size including redoing it with cement mortar on 1:6 cement plastering sides etc.+APPENDIX XVI : Providing FHTC (KOOVAPPALLY)9100.60.1.4.2: Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing AC / GI mains up to 125 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, GI / MS / SS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.V100.60.3.1.1:Providing additional length of house connection pipe using 20mm Indian Standard Class 6 uPVC pipe and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers%
100.60.12.3.1:Providing 15mm PVC Tap in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers.1
100.60.10.4.1:Providing 20mm (1/2 inch) PVC Air Valve in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire for tools and labour charges etc. complete and

0kg/cm2, 160mm Dia.1OD305047/2023-2024:Supply of 100mm GI pipe Medium1OD305066/2023-2024:Supply of 125mm GI pipe Medium1OD305065/2023-2024:Supply of 150mm GI pipe Medium‚OD305045/2023-2024:Supply of GI specials-Cost of GI specials (Bends,Tee,coupler, Tailpiece,end caps ,CID/CIR etc )5% cost of pipe.OD305067/2023-2024:Supply of PVC specials-Cost of specials (Bends,Tee,coupler, Tailpiece,end caps,CID/CIR etc )3% cost of pipe.p
100.9.10:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 140 mm nominal outside diameter pipes.p
100.9.11:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 160 mm nominal outside diameter pipes.Æ100.12.10:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 125mm diameter nominal bore.^
OD305036/2023-2024:Fabricating MS flanges of diameter 125 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For GI pipes 125mm Medium(3.6mm).s100.98.441:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 40mm.|100.98.459:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 125mm.ú100.32.2:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 40mm Single Acting Air Valve.±100.41.40:Supply, stacking, spreading and consolidating of Red earth in the trench of pipe line for cushion including carriage, loading, unloading & stacking up to any lead.ë100.31.1.3:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 125mm diameter, Class I.È
100.59.3:Restoring the road surfaces by providing and laying factory made cold bitumen-aggregate pot-hole repair mix in two layers of 25mm thick (total 50mm thick), by cleaning the surface with brooms etc. to remove dust/debris/water etc, placing the premix, compacting properly with hand-rammer etc. complete, including traffic control, providing caution boards and as per direction of Engineer-in-charge for road restoration works in pipeline leak sites.¤OD305043/2023-2024:Cutting GI pipe and specials by gas cutting including cost of gas,all labour and hire charges of tools etc complete. (Data Derived from100.37.1)ÃOD305042/2023-2024:Grinding the cut edges / welded portions in GI, pipe and specials by grinding machine including all labour and hire charges of tools etc complete. (Data Derived from 100.37.2)
OD305046/2023-2024:Welding GI pipe and special by gas or electric plant for three run welding including cost of welding rod / gas, all labour and hire charges of tools etc complete.Derived from 100.37.3 and also use GI spray at welded portion for preventing corrosion.àOD305044/2023-2024:Interconnection of newly Laid Line with existing 200 mm PVC pipe with newly laid 160mm PVC line using unequal Tee including ,suitable joints (CID/CIR ) including cost of necessary specials and all labor
OD305041/2023-2024:Shifting existing water connection to newly laid line using contractors own specials ( saddle piece , pipe , union, main cock and including cost of specials(ASTM/uPVC), labour charges and including cost of earth work excavation as per direction of dept. officersCAPPENDIX XXIV : Construction Of Valve Chambers For Newly Laid Linesè4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)™OD315020/2023-2024:Supplying and fixing C.I man hole cover with frame for manholes:560 mm diameter ( heavy duty) the weight to be not less than 208 kg.jAPPENDIX XXV : Restoration Of Panchayath Road of Newly Laid Line at Ponkunnam (Koippally line Replacement)h
4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place MethodÁ12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer - (Without formwork) <br>SAPPENDIX XXVI : Restoration Of KSTP(PP Road), NH 183 Ponkunnam Town To KVMS Jn Area®12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer <br>

Work Name:Jal Jeevan Mission (JJM)-JJM Chirakkadavu and JJM Kanjirappally - Phase 2-Kanjirappally Panchayath- Construction of 50000L Sump cum Booster Pump House and providing Water supply facilities at Koovapally in Kanjirappally Panchayat and Chirakkadavu Local body - Package 2-Construction of 5.25 LL OHSR at Ponkunnam and 2 LL OHSR at GH Kanjirappally-General Civil Work

Work Name:Jal Jeevan Mission (JJM)-JJM Chirakkadavu and JJM Kanjirappally - Phase 2-Kanjirappally Panchayath- Construction of 50000L Sump cum Booster Pump House and providing Water supply facilities at Koovapally in Kanjirappally Panchayat and Chirakkadavu Local body - Package 2-Construction of 5.25 LL OHSR at Ponkunnam and 2 LL OHSR at GH Kanjirappally-General Civil Work