Construction of U-Shape deep drain covered with RCC slab on both side of Pathankot Nurpur Palampur Joginder Nagar Mandi Sunder Nagar Ghagas Bilaspur Nauni road NH-154 at R.D. 213/800 to 215/300.

Amount

Excavation in soil by mechanical means in hilly area all heights and depths, in all kind of soil including saturated soil comprising of pick, jumper, blasting work both in soft and hard rock with chiseling/wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including, dewatering wherever required setting out to the required line grades, side slopes trimming bottom and level as shown on the drawings as directed by Engineer-in-Charge at site according to technical specifications sorting out useful/ unuseful materials and stacking the same in all leads and lift and transportation of un-useful materials for filling in road ways, embankments for grades improvements and levelling to the required grade and then disposing of surplus excavated earth in acquired width of roads or on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its levelling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete the work by all means ( if required). Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all respect including all leads and lift of materials or as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete 1:3:6 (one Cement : three coarse sand): six graded stone aggregate 40 mm (Firty millimetre) nominal size) curing complete excluding the cost of centering and shuttering up to all level including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying in position cement concrete 1:2:4 (one Cement : two coarse sand): four graded stone aggregate 20 mm (Twenty millimetre) nominal size) curing complete excluding the cost of centering and shuttering up to all level including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying in position reinforced cement concrete 1:2:4 (one Cement : two coarse sand): four graded stone aggregate 20 mm (Twenty millimetre) nominal size) curing complete excluding the cost of centering, shuttering, finishing and reinforcement up to all level including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all level including the cost of binding wire and carriage of material with in all leads, lifts or as per the entire satisfaction and direction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing form work centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing form work centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing form work centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform including carrige of material with in all leads and lifts and as per the entire satisfaction and direction of Engineer-in-Charge.

PAWAN KUMAR