Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.2 LAccepted-AOC PO BINNAGURI DIST JALPAIGURI WEST BENGAL PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹24.0 L+₹9,822.90 (0.41%)Rejected-Finance VILL DEPOPARA BINNAGURI PO BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹24.1 L+₹24,478.75 (1.02%)Rejected-Finance GAIRKATA ROAD WARD NO 03 PO PS DHUPGURI DIST JALPAIGURI W B PIN 735210 | JALPAIGURI | WEST BENGAL | 735210 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹25.9 L+₹2.0 L (8.50%)Rejected-Finance 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹26.0 L+₹2.1 L (8.64%)Rejected-Finance 777 AMAR NAGAR VILLAGE TOWN CITY RAE BARELI RAEBARELI UTTAR PRADESH 229001 INDIA | RAE BARELI | UTTAR PRADESH | 229001 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
4 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
CERTAIN B/R AND E/M REPAIR WORKS IN OFFRS MD ACCN AT CENTRAL ZONE UNDER GE (NORTH) BINNAGURI
2023_MES_611992_1
NIT No. 8701 / 25 / 2023-24 / 09 / E8
Open Tender
Civil Works
Item Rate
270 days
BINNAGURI CANTONMENT
Class D Category a (i) b (i)
8 documents required · 8 mandatory
₹500
GE NORTH BINNAGURI
₹66,000
Yes
21 Oct 2023
3 Aug 2023
6 Sept 2023
3 Aug 2023
4 Sept 2023
19 Aug 2023
Amount
Taking down chowkat with shutter exc 1.5 Sqm and n.exc 4.00 Sqm each and removing from site including builders Hardware complete all as specified and as directed.
Taking down shutter of any description but exc 1 Sqm and n.exc 2 Sqm each including builders complete all as specified and as directed.
M&L for Mild Steel framed work as in doors frame of angle or other section conforming to Fe 410-W(Gde-E- 250) quality-A with gusset plates, rails, braces, etc and including fixing of hinges or other door fittings complete all as specified and as directed. Note: Door fittings like hinges, tower bolt etc shall be measured and paid separately.
S&F 30mm flush shutter, solid core construction with block board core and plywood face panel, commercial type on both side include for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified and as directed.
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc without sash bars), edges of framing plain, chamfered rounded, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
Taking down old chowkat with shutter n.exc 1.5 Sqm each (without taking off shutter from the frame) including builders complete all as specified and as directed.
S&F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for tiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified and as directed.
S&F for solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed including fixing of hold fast as per specification and drawing complete all as specified and as directed.
S&F 100 mm long stainless steel butt hinges complete all as specified and as directed.
S&F 150 mm long aluminium anodised barrel tower bolts complete all as specified and as directed.
S&F 150 mm size aluminium anodised door handles complete all as specified and as directed.
S&F for sliding door bolt of 300mm long plate aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M&L for preparation of new wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified and as directed.
S&F in repairs powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per Mtr for shutter and aluminium sections weighing not less than 1.67 Kg per Mtr for frame including necessary jointing cleats, glazing cleats, fubber packing, screws, handle, locking arrangement etc complete and 4 mm thick tinted glass and stainless steel mosquito proof gauge complete all as specified and as directed. Note: Standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-09 Sheet 1/8 to 8/8).
S&F aluminium anodised louvered ventilators with glass louvers, without sash bars of aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings and with suitable locking arrangements including taking down of old complete all as specified and as directed. Note: Standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-09 Sheet 1/8 to 8/8).
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed
S&F of mild steel work such as window guard bars and similar work conforming to Fe-290 Grade - E-165 complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperture 1.40 mm fixed with stainless steel wire staples and beads complete all as specified and as directed.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surface finished even and fair complete all as specified and as directed.
M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and as directed.
M&L preparation of new plastered surfaces of any description and applying three coats of white wash on walls complete all as specified and as directed.
M&L for rendering 5mm thick plastering in cement mortar (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and fair without using extra cement complete all as specified and as directed
M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and as directed.
M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two coats (10mm + 5mm). First coat shall be 10mm thick in CM 1:4 and second coat shall be 5mm thick in CM 1:4 and second coat mixed with waterproofing compound @200 ml per bag of cement finishing the surface fair and even without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Supply only Liquid water proofing compound complete all as specified and as directed.
M&L preparation of new plastered surfaces of any description and applying two coats colour wash over a coat of white wash on walls complete all as specified and as directed.
S&F in repairs 150 mm long aluminium anodised barrel tower bolts complete all as specified and as directed.
S&F in repairs 150 mm long aluminium anodised door handles complete all as specified and as directed
S&F in repairs for sliding door bolt of 300mm long plate aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F in repair Grating doom 125 mm dia with waste hole/without hole of PTMT (Minimum weight 40gms) complete all as specified and as directed
S&F in repairs bib taps fancy type brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and as directed.
S&F in repair 15 mm bore brass CP angle cock single way with flage complete all as specified and as directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repairs vitreous china wash basin, white, flat back of size 550 x 400m excluding taps, waste, chain & plug & porcelain stopper including brackets including cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and as directed.
S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection PVC flush pipe of required length complete all as specified and as directed.
S&F in repair 1st quality vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete including provision of lime concrete bedding complete all as specified and as directed.
S&F in repair 1st quality vitreous china wash down water closet pan (pedestal pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe, seat cover etc complete all as specified and as directed.
S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified and as directed.
S&F Brass CP health faucet 25mm dia with crutch or butterfly handle with 1 mtr flexible tube and hook complete as fixed in repair complete all as specified and as directed.
S&F PVC connection pipe with nut at both ends n.exc. 450mm for hot and cold water complete as fixed in repair complete all as specified and as directed.
S&F PVC waste pipe for WHB/Kitchen sink complete as fixed in repair complete all as specified and as directed.
S&F in repairs of brass spindle for bib tap / stop cock/ pillar cock as approved complete all as specified and as directed.
S&F in repairs of brass spindle for Wall Mixture/ WHB Mixture as approved complete all as specified and as directed.
S&F in repair Curtain rod 20mm dia, mild steel, chromium plated with fixing ornamental brackets, clamps etc complete all as specified and as directed.
Taking up or down GI tubing 15mm/ 20mm bore pipe and connection including cleaning for refixing or removal from site of work complete all as specified and as directed.
S&F of Tubes, medium grade, 15 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor laid over 15mm screed bed in CM (1:6) complete all as specified and as directed.
M&L for glazed ceramic colour tiles 300x450x 6 to 7mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 10mm thick rendering in CM (1:4) complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing etc complete all as specified and as directed.
M&L for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/daddo over 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Demolition slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 18 mm thick Granite work (table rubbed and polished) in decorative shelves, steps ,pillars, jambs, cooking platform etc laid over 15mm screed bed in CM (1:6) with chamfering of edge including pointing in white cement with pigment to match with shade of granite including grinding & mirror polishing with wax polish complete all as specified and as directed.
Taking down tarfelt with cement plaster/pcc from roof surfaces and lowering and removing the same to a distance exc. 500m and n.exc 1500m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces with water proofing compound @200 ml per bag of cement for applying single component acrylic polymer modified, finished even and smooth without using extra cement complete all as specified and as directed. Note: Polymeric membrane and water proofing compound shall be measured and paid separately under relevant item of this Schedule 'A'.
M&L for cutting out cracks to 'V' section (shape) in existing roof slab terracing cleaning out and filling solidly with cement and sand mortar (1:1) complete all as specified and as directed.
M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application (a) apply primer coat with Primer @ 0.3 kg /sqm (b) over priming coat apply fibre reinforcement a length of approx 1m @ 0.75kg/sqm on the flat surface and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Apply second coat @0.75Kg/sqm (d) Apply final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note: Water Proofing treatment shall be carried out by applicator approved by the manufacturer.
M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard door/shelves/wall paneling including 6 mm thick wooden leaping and dismantling of old boarding complete all as specified and as directed. Note: The cost is including polishing to wood surfaces.
S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-22 complete all as specified and as directed.
S&F 100 mm long aluminium anodised barrel tower bolts complete all as specified and as directed.
S&F 100 mm long aluminium anodised door handles complete all as specified and as directed.
M&L for 75mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.
S&F in repairs stop valves 15mm dia fancy type brass, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified and as directed.
S&F in repair CP central hole basin mixer of 15mm dia (Swan neck) for WHB complete all as specified and as directed.
S&F in repair wall mixer of 15mm bore complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame including punching or drilling out old glazing pins/spring clips and providing new ones for 3mm thick glass sheet fixed with oil putty/nut bolt in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
S&F in repairs 100 mm long MS steel windows handles left and right both including taking down old one complete all as specified and as directed.
S&F in repairs 300 mm MS steel windows peg stay including taking down old one complete all as specified and as directed.
S&F in repair 0.63 mm thick stainless steel plate rack of size 31"x42"x10" complete all as specified and as directed.
S&F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.
Taking down & refixing rolling shutter and greasing the ball bearings after carryout necessary repairs complete all as specified and as directed. Note: The defective ball bearings shall be replaced under relevant item of this schedule as supply only.
Supply only ball bearings suitable for rolling shutters complete all as specified and as directed.
Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified as directed.
S&F 1000 ltrs capacity rotational moulded polyethylene water storage triple layers (cylindrical vertical with closed top) hoisted and fixed in positions including necessary fittings all specified in SSR Part-I complete all as specified and as directed.
INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.
M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete for one light point controlled by one, one way switch complete all as specified and as directed.
Description all as per item No 82 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.
Description all as per item No 82 here in before but for one 3/5 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
Description all as per item No 82 here in before but for one 3/5 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.
Description all as per item No 82 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.
Description all as per item No 82 here in before but for one light point controlled by one, two way switch 5 Amps complete all as specified and as directed.
Description all as per item No 82 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.
S&F switch piano flush type 5/6 amps single pole two way complete all as specified and as directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.
S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.
S&F in repair switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.
S&F in repair Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with and including taking down existing unserviceable, complete all as specified and as directed.
S&F in repair switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable, complete all as specified and as directed.
S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.
S&F in repair modular switch 6 Amp of one module complete all as specified and as directed.
S&F in repair modular switch 16 Amp of one module complete all as specified and as directed.
S&F in repair modular socket 6 Amp 2/3 Pin combined 2 module 230 volt flush type complete all as specified and as directed.
S&F in repair modular socket 6/16 Amp 2/3 Pin combined 2 module 230 volt flush type complete all as specified and as directed.
S&F in repair modular fan regulator 120W 230 volts AC 50 Hz 2 modules complete all as specified and as directed.
S&F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.
S&F in replacement LED white glass Lamp 1x9/10 Watt 230V Base-22 complete all as specified and as directed.
S&F in repair deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 120 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour of size 200 mm x 100 mm including taking down existing unserviceable complete all as specified and as directed.
S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed.
S&F in repair modular blank plates of 4 Module including taking down existing unserviceable complete all as specified and as directed.
S&F in repair modular blank plates of 6 Module including taking down existing unserviceable complete all as specified and as directed.
S&F in repair modular blank plates of 8 Module horizontal type including taking down existing unserviceable complete all as specified and as directed.
S&F wall mounted 4 feet LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type (decorative) batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 Single side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and taking down old unserviceable one complete all as specified and as directed.
S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.
S&F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and taking down old unserviceable one complete all as specified and as directed.
S&F wall mounted 2 feet LED 10 watts, batten type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements including necessary connection including taking down old unserviceable one complete all as specified and as directed.
S&F Post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements including taking down old unserviceable one complete all as specified and as directed.
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm PVC rigid non-metallic conduit with and including taking down unserviceable sub main wiring complete all as specified and as directed. Note : Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.
All as per item No 117 above but using two runs 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed. Note : Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.
S&F in replacement of sheet metal enclosures with socket two pin and earth plug top and MCB SP-20 Amp 230 volt complete all as specified and as directed.
S&F in replacement of MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and as directed.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, (SP) single pole & neutral,5 to 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.
S&F MCB, (SP) single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.
M/S D S CONSTRUCTION CO
BIG BEN ENTERPRISES
M/S SINHA ENTERPRISE
SINGH & CO
SHIVAAY CONSTRUCTIONS
SHRI SATPAL SINGH
M/S SARKAR BROTHERS
ANIL ENGINEERING CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .