8399/E8 MAINT AND REPAIR/REPLACEMENT OF B/R NATURE WORK IN MD/OTM ACCN AT RTS AND DEPOT (INCLUDING MES OFFICES AND MES COLONY) UNDER GE EAST BAREILLY

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed

Material and labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete.

Material and labour for glazed ceramic tiles coloured of size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material and labour for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

All as per item No 06 but in skirting, vertical surface dadoes and riser etc. over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

Material and labour light shed vitrified Ceramic tiles 9mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

All as per item No 08 but in skirting, vertical surface dadoes and riser etcover and including 10mm thick rendring in CM (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles of dark shade/ Double Charge, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed.

M&L for vitrified ceramic tiles of dark shade/ Double Charge, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in Dado Skirtin etc. over and including 10 mm thick Backing Coat in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.

Material & labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as directed.

M & L machine cut Kota stone 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete up to deserid finish and including 20mm thick bedding layer of CM 1:6 for receiving floor finishes and incl Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to removecomplete all as directed.

M&L Kota stone slab 20 to 25 mm thick in riser of steps,skirting, dado laid over cement screed jointed including 15mm thick rendering in CM 1:4 for receiving floor finish all as specified and directed.

M & L for Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M & L for PCC mix Type( D2 1:4:8 40 mm greaded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

Supply only glass dividing strips ,3mm thick, 38 mm wide laid in position conforming to design pattern as approved by Engr-in-Charge.

M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L Sand filling under floors or in foundation including watering and consolidationcomplete all as specified and directed .

M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.

S&F rubber moulded decorative designed coloured machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed

M&L cement concrete type C-1,1:3:6 ( 20mm graded stone aggregate) as in copings, packing around interlocking paver blocks.

M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc

Dismantling of plain or corrugated Asbestos cement including Nanital or similar pattern roof covering complete all as specified.

S&F 6 mm thick Asbestos cementcorrugated for semi corrugated sheets in roofs fixed with L type and J type hook bolts etc complete all as specified and directed.

M&L Asbestos cement two piece adjustable plain wing ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed..

S & F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated / Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Fibre glass reinforced translucent corrugated sheeting (approved color and pattern) with two corrugations side lap fixed with coach screw and washer in roof, wall etc incl L type or J-type hook instead of screw complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description.

S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A.

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer in charge.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and complete all as specified and as directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) of average thickness 40mm in slope as required over roof complete all as specified and directed.

M&L for 10mm thick plastering in CM(1:4) on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down existing plaster and APP membrane all as specified and directed.Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI Marked all as specified and directed.

M&L PCC 1:5:10 type E-2 (40 mm to 80 mm graded stone aggregate) as sunken sub base of floor fillings complete all as spd as directed

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets.

Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

S&F in repair PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cum density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.

Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

All as per above Item no 52 but half brick in CM(1:4)

Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete.

Material and labour for rendering 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound including Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete. Note:-Supply only of WPC shall be measured and paid separately.

Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete.

Supply and fixing in repair for 75mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified.

Material & labour in repair for 2nd class hard wood plain fillets, square, rectangular in section, making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails

Supply and fixing in repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed

Extra over rate for item No 60 above for prelaminated partical board for external teak wood lipping 6mm thick fixed with nails complete.

Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm

Taking down shutters only of any description area n'exc 1.00 sqm complete all as specified and directed.

Taking down shutters only of any description, area exc. 1.00 sqm but n,exc. 2.00 sqm, each, complete all as specified and directed.

Refixing of shutters only of any description area n'exc 1.00 sqm at same opening complete all as specified and directed.

Refixing of shutters only of any description area exc. 1.00 sqm but n,exc. 2.00 sqm, each at same opening complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n'exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed.

S&F 30mm thick flush shutters, solide core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S & F 35mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

S & F 35mm IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

S & F of solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as spd

S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as peccified

S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on each openable leaf and Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for steel windows, ventelators confirming to IS-1038 with side hung shutters including box type hinges with steel handle, 2 Nos 100mm MS tower bolt over MS flats iron on each openable leaf and Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including a shop coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glass shall be measured and paid for separately).

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S & F 3mm thick figured glass pine head type and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required.

S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0

S&Fsecond class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples.

Supply and fixing in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel/wooden windows complete all as specified and directed.

M & L for IInd class hard wood fillets square, rectangular or triangular insection, chamfered on edges & face and bullnosed for sectional area n' exc 3 Sqcm complete all as specified and directed.

Supply and fixing Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete.

Supply and fixing aluminium handles extruded type of size 125mm, complete all as specified and directed.

Supply and fixing 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete.

Supply and fixing 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy

S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.

Preparation newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of pink primer complete all as specified and directed.

Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

S & F GI tubing of 15mm bore of tube medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including Taking up or down existing steel tubing 15 mm bore and connections complete all as specified and as directed.

S&F GI tubing 20mm bore 'medium grade' galvanized with and including all GI fittings and fixed complete to walls and ceiling or laid in floors including Taking up or down existing steel tubing 20 mm bore and connectionscomplete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F and repair 15 MM bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions ( Minimum weight 120 Gms) all as specified.

S & F in repair 15 MM bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 110 Gms) all as specified.

S & F in repair 15 MM bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends all as specified.

S & F of sink with drainage board made of stainlen steel 1 mm thick kitchen or lab with plugs washers and water incl bedding in cement work to drawt wall or incl fixing contilever bracket and connecting union to pipe over all size 915x460 mm bolw size 410 mmx330mmx160mm.

S & F and repair 15 MM bore fency type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions all as specified.

S & F in repair 15 MM bore stop valves cost copper allow chromium plated fency type screwed down high pressure, with crutch or capastan handle screwed both ends all as specified.

S & F and repair 15 MM bore pillar cock fency type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all complete all as specified.

S&F in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

S & F for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and directed by Engineer-in-Charge.

S&F PVC 10 ltr capacity symphonic action type, low level, flushing cistern, white, with inlet, ball valve, float and handle including MS suitable size bracket complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm , white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed.

S&F in Vitreous China counter top oval type coloured wash basin suitable size including pillar taps with bottle trap, including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make Jaguar or equivalent

S&F in repairs Vitreous China bowl urinal flat back of size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S & F PVC waste pipe of 32 mm dia PVC socket for WHB/Kitchen sink complete including sink cuppling complete all as specified by and directed by Engr-in-charge.

S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) all as spd. And directed

Supply and fixing in repair glass self made out of 5mm thick 600mm long x 150mm glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket. Make:- Jaquar(Continental) or equivalent complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair corner glass self made out of 5mm thick 225mm x 225mm size glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket complete all as specified and directed by Engineer-in-Charge..

supply and fixing in repair cp paper holder for Ewc complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls,complete all as specified and directed by Engineer-in-Charge.

S&F in repair two way bib tap 15mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair of fancy type three handle wall mixer, chromium plated with or without lettered Hot or Cold with a single unit fitted on wall and fixing for pipe of 15mm bore make as given in list of makes as directed by Engineer-in-charge

Supply and fixing in repair of PVC Mirror cabinet, size 330 X 430mm single door with mirror colour white complete all as specified and directed. make as given in list of makes complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in Charge for following capacity including writing with oil paint the date of cleaning on tank ;

(a) Exc 250 Ltrs but not exc 500 Ltrs

(b) Exc 500 Ltrs but not exc 1000 Ltrs

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc & and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete.

Supply and fixing rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete .

Supply and fixing 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15mm/20mm (using reducer) and fixed

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe.

S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 20mm bore complete all as specified and directed by Engineer-in-Charge.

S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed

Dismantling of PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S & F in repairs CI bend 75 mm (any radius) or diminishing pieces (Tee,Elbow,Double Tee & socket) all as spd.

S&F CI bends (any radius) 100mm bore (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engineer-in-charge.

S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed.

Taking out unserviceable Nahani trap / floor trap and M&L for 75 mm dia Nahani trap / floor trap with CI grating with lead joints, complete all as specified and directed. ( ISI marked and conforming to relavent IS)

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair heavy duty hydraulic floor door spring fixed to floor for heavy toughend glass door including top ss bracket with pivot for fixing of glass with glass partition including all taking down and refixing of heavy glass any type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed by Engineer-in-Charge.

M/L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional ccomplete all as specified and directed by Engineer-in-Charge.

M/s Naresh Kalia (BID ID -3345747)