PETTY REPAIR AND DAY TO DAY MAINTENANCE AND MISC BR WORK AT ICGS VADINAR UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A' B/R

Supply & Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire stapels including old or new beading, complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness size quality or description) from wooden, steel or aluminium frames glazed with putty or fixed with wooden beads, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair 20mm dia aluminium curtain rod with brackets etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair 150mm aluminium handles, cast type anodised, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 200mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair rubber beading 50mm wide and 5mm thick, complete all as specified and directed by Engineer-in-Charge.

Demolition of re-inforced cement concrete of any description and in any position not other wise specifically provided for like manhole covers, kichen shleves etc., any floor, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for precast RCC cover slab for drain and manhole cover, kitchen shelves at type B-1, 1:2:4 & set in Cement Mortar 1:6, including all necessary formwork and finishing exposed concrete surface without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour CRS TMT bars 10mm dia and over, cut to length, bent shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat with shutters (without taking of shutters from the frames of any description not exceeding 1.5 Sqm in each panel, complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat but shutters (without taking of shutters from the frames of any description exceeding 1.5 Sqm but not exceeding 4.0 Sqm in each panel, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 40mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 100mm long medium weight, cold rolled mild steel Butt hinges and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 150mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 150mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 1.5mm thick Decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on 18mm thick calibrated plywood of, grade BWR, type BB, fixed with screws to timber frame work, including taking down old Unserviceable, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm, complete all as specified and directed by Engineer-in-Charge.

Dismantling of floor hearth or wall tilling including cement mortor bedding and removing rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing granite 18 to 20mm thick (of any type) tiles, machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture or pigment to match the shade of granite stone including grinding and polishing, moulding edges as directed and making hole for gas pipe if required, including 15mm thick rendering in Cement Mortar 1:3 as backing, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Non-skid coloured Ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed or bedding layer in 1:4 Cement Mortar, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Glazed coloured ceramic tiles in vertical surface 350 x 250 x 7mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10mm thick rendering in Cement Mortar 1:4 on vertical surface, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity, including taking down existing water tank, complete all as specified and directed by Engineer-in-Charge.

Supply & fixed in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair soap dish of chromium plated fixed to plugs with chromium plated screws, complete all as specified and directed by Engineer-in-Charge.

Dismantling mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing steel work in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair health faucet with all accessories, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair PVC (SWR) pipes single socketed in any length with rubber ring joints and accessories laid in floors/wall of 110mm bore, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair PVC (SWR) bends 110mm upto, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair Plate racks made out of 0.8mm thick Stainless steel, of size 750 x 600 x 250mm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair PVC waste pipe flexible type for couplings 32/38 mm dia 610mm long, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipes, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair handles for 10 Litre capacity PVC flushing cistern, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair 15mm float valve for 10 Litre capacity PVC Flushing cistern, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair washers for 10 Litre capacity PVC flushing cistern, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous china Pedestal type water closet with white seat cover, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair Vitreous China ware wash hand basin white, flat back, size 550 x 400mm size with cutting for and pinning ends of brackets or erecting stand including CP waste coupling, 32mm dia PVC waste pipe, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous china Urinal Half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair low level flushing cystern 10 Litre capacity, valveless, syphonic action type with inlet, ball valve, float and and handle, body moulded from virgin quality high impact poly propoliyone including brackets and 32mm dia PVC flush pipe for low level flush cistern, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs for 15mm dia CP tap of brass type cast copper alloy with crutch or butterfly handle fixed, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repairs brass CP shower rose 75mm size fancy type with swivel joint any size incl fixing to steel pipe/union for 15mm dia, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair PVC connection of 15mm dia length 450mm with PTMT nuts, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair PVC connection of 15mm dia length 600mm with PTMT nuts, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair stop valve 15mm dia, caster copper alloy, screwed down, high presseure fancy type chromium plated screwed both ends for iron pipe or for unions with long shank and cup (concealed type), complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved patterns and design, complete all as specified and directed by Engineer-in-Charge. Make: PRAYAG, CAT NO - 551 or equivalent make mentioned in Appendix 'B'.

Supply & Fixing in repair Peg set of three made of teak wood and Aluminium pegs of size 10cm, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair CP Grating 100mm dia, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair brackets for curtain rod, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair powder coated aluminium Door/window frame made of 91 x 43 x1.50mm sections and shutters made of 39.4 x 17.7 x 1.50mm thick sections with 4mm thick tinted glass and mash shutter made of 39.4 x 17.7 x 1.50mm thick sections with fixed stainless steel wire mash including locking handle, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair powder coated aluminum grill/chequered mesh of size 75mm x 75mm including 'U' channel etc; complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for flooring, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 75mm thick PCC 1:3:6, C-2 (using 40mm graded granite stone aggregate) in plinth protection finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 100mm thick PCC 1:2:4, B-1 (using 20mm graded granite stone aggregate) in flooring, complete all as specified and directed by Engineer-in-Charge.

Cleaning of water tank of capacity exceeding 500 Litre but not exceeding 1000 Litre removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc. complete all as specified and directed by Engineer-in-Charge. Note : The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.

Supply & Fixing in repair 20mm outer dia of pipe 3-layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV Stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plian & brass threated polypropylene random fittings fixed complete to walls, ceiling or in floors etc., complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair PPR pipes 32mm outer dia laid in wall, floors including bends, elbows, unions etc, laid on walls and making good, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Aluminum Composite panels in all coloures of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxident LDPE sandwitched between two skin of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC wall, framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mm x 20mm with 1mm thickness in 600mm x 600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc, complete all as per Manufacturer instruction and all as specified and directed by Engr-in-Charge. NOTE:- (i) All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. (items included cost of aluminium frame, ACP Panels, Cramps, weather sealent, gasket, foam, fixtures, scaffolding, all machineries and any other fastening streps, nuts, bolts, rivets, washers, etc complete). (ii) The manufacturer shall also give guarantee/warranty for ACP panels for a period of Five years.

Demolition of brick and stone wall built in cement mortar including all quoins, arches, pillars built in cement mortar, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded stone aggregate) with solid blocks, exceeding 10cm in width and setting in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 15mm thick on stone or concrete surfaces in Cement Mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 5mm thick Cement plaster on ceiling in Cement Mortar 1:3, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of new/ old plastered surfaces of wall applying two coat of exterior weather proof paint over a coat of chalk white primer of approved shade, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of new/old plastered surfaces of wall applying two coat of oil bound distemper a coat of chalk white primer of approved shade, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc. and applying two coat of white wash, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of old decorated steel surfaces including cornices, pilasters etc. and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Taking down existing roof treatment including plastering below tar felt etc of any type any thickness and remove the same from work site out side the MD land, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 10mm thick rendering in cement mortor 1:4 mixed with water proffing compound including brushing with neat cement slurry @ 3kg per Sqm as in roofs (water proofing compound shall be measured separatly), complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-Charge.

Supply and laying HYPERPLAS-STANDARD 3kg/Sqm polymeric water proofing membrane incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100 gms/sqm, followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2kg/Sqm each at the top and bottom and applying of one coat of aluminium paint on the membrane complete including sealing all joints by themo fusion with minimum 10cm overlap all as per manufacturers instructions, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Heat Resistant Terrace Tiles (300mm x 300mm x 10mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on water proof and sloped surface of terrace, laid on 20mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150mm height along the parapet walls in the same manner, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 40mm thick PCC 1:2:4, B-0 (using 12.5mm graded granite stone aggregate) in roof covering, complete all as specified and directed by Engineer-in-Charge.

Nitesh Enterprise (BID ID -3102549)

JAY BHARAT METAL SUPPLIERS (BID ID -3112872)

RAJESH ENTERPRISE (BID ID -3102475)