Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.2 LAccepted-AOC 344 1 SB GORAI ROAD HILL VIEW PARK NORTH ASANSOL | ASANSOL | WEST BENGAL | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹53.5 L+₹65,853 (1.25%)Rejected-Finance 138 CANNING STREET GROUND FLOOR KOLKATA | KOLKATA | WEST BENGAL | L2 | Rejected-Finance Greater than L1 (Rank L2) | |
| 3 | L3₹53.6 L+₹79,277 (1.50%)Rejected-Finance | L3 | Rejected-Finance Greater than L1 (Rank L3) | |
| 4 | L4₹53.9 L+₹1.1 L (2.00%)Rejected-Finance 7G CORNFIELD ROAD KOLKATA 700019 | KOLKATA | KOLKATA | WEST BENGAL | 700019 | L4 | Rejected-Finance Greater than L1 (Rank L4) |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
11 Jan 2021, 5:00 pmClosed
Executive Engineer
Office of the Executive Engineer Mechanical_Electrical Division Berhampore PH Engineering Dte Netaji Subhas Road P H E River Side Complex Berhampore Murshidabad PIN_742101
Improvement of High Lift Pumping Machinery at Water Treatment Plant and Allied works for Surface Water based Water Supply Scheme for Jiaganj_Azimganj Municipality_Azimganj portion Block_Murshidabad_Jiaganj District_Murshidabad under MEDB PHE Dte
2020_PHED_310032_1
WBPHED/EE/MEDB/NIeT-24 of 2020-21
Open Tender
MECHANICAL
Item Rate
120 days
Jiaganj_Azimganj_MSD
Improvement of High Lift Pumping Machinery at Water Treatment Plant and Allied works for Surface Water based Water Supply Scheme for Jiaganj_Azimganj Municipality_Azimganj portion Block_Murshidabad_Jiaganj District_Murshidabad under MEDB PHE Dte
6 documents required · 6 mandatory
₹1.3 L
21 Jan 2021
22 Dec 2020
14 Jan 2021
22 Dec 2020
11 Jan 2021
22 Dec 2020
Amount
Supply, delivery and storage at site vertical turbine pump, gland packed with discharge head assembly, sole plate, companion flange, thrust bearing, housing with coupling NRR assembly & Motor stool, self water lubricated column & shaft assembly, Bowl assembly & basket strainers as per NIT specification for Gr.-I. Discharge: 111 Cum/Hr Head :50 MWC
Supply, delivery and storage at site of 4 pole, 1500 rpm, AC 3 Phase, 50 Hz., 415 V, Vertical Flange Mounted Squirrel Cage Induction motor suitable for outdoor duties with canopy for above pump set as per NIT specification Gr.-I.
Supply, delivery at site Mandatory Spares for Vertical Turbine Pumps of Item No.1 above as per NIT specification.
Drawing, Design and fabrication of M.S structural frame work including supply of joists, channels, Angles, plate etc. as required for installation of Vertical Turbine Pump sets on the roof of existing GLR.
Drawing, Design, Construction of RCC foundation & finishing by supplying all materials for supporing MS Structure on RCC Foundation for installation of VT pumps above the GLR as per NIT specification
Supply, Delivery and storage of MS pipe, Flange fittings etc. required for modification of individual pump discharge lines for installation of new vertical pumps.
Supply, delivery and storage outdoor type Pillar feeder for combined pump and Actuator operation along with illumination feeder of W.T.P Back Wash pumping machinery, as per technical specification of NIT
Supply, Delivery at site and Storage of Ladder type Cable Tray and G.I Perforated cable tray for laying of power cable/control cables to and from MCC Panel at Pump House having proper M.S. structural support as per technical specification of NIT and direction of EIC.
Supply, delivery at site and storage of Earthing Materials for Equipment Earthing (Motors) as per technical specification of NIT.
Supply, Delivery and Storage at site Diaphragm type pressure gauges, 150 mm dia cast Aluminium Dial with , SS internal, DN 15 GI impulse line with three way cock. a) Pressure Guages (0 - 10 kg/cm2)
Installation of all items mentioned above (Sl no 1 to 7 and 9) including supply of all erection items all complete and minor Civil Work and also testing and commissioning as per direction of the EIC.and as per technical specification of NIT. Above cost includes the cost . Dismantling and withdrawing of 6 nos. existing Polder Pumps at CWR of WTP and installation of pump in CWR at new location, . icluding transfer of all dismantled materials to store as per direction of EIC and as per direction of NIT Specification.
Painting of the equipments of Raw water and Back wash Pumping Machinery that includes Pumps, Motors, Supports, pipelines, Valves, Actuators, with anticorrosive primer and then application of epoxy based paints on outdoor equipment all complete to the entire satisfaction of the EIC and as per NIT specification.
Add GST @12%
WEST BENGAL ENGINEERING CO.
INDUSTRIAL ELECTRICAL CORPORATION
CONCORD ENGINEERING
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .