Loading
Loading…
Loading…
Tender Value
₹64.4 L
EMD Value
₹1.3 L
Closing Date
27 Dec 2025, 12:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEG/SEE
16 conditions · 5 needing a document upload
Contractor should have to be registered with Employee Provident Fund Organization (EPFO). It is mandatory for contractor to submit PF code provided by EPFO with their tender offer. Also each contractor has to submit "UAN" of their worker with their offer and have to mention in tender document. It is mandatory. Otherwise offer will not be considered for further action and your offer will summarily be rejected.
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of 'V/N'or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
As per CE/Works/HJP's letter no. ECR-HQ0ENGG(CONT)/0009/2025, dated 18.11.2025 "The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference."
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/Central Govt. licensing board for the required voltage level or above with their tender paper. Tenders without valid electrical contractor's license & Supervisory license will summarily be rejected.
"ELIGIBILITY CRITERIA:- Document required to be submitted in support of Technical Eligibility Criteria: Tenderer should have completed at least one similar single work. The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar nature of works (as defined and approved by competent authority) for " (i) At BGS:- Electrical work in connection with improvement of station building with provision of 2nd entry, extension of FOB and additional PF shed with replacement of AC Sheet of PF. (ii) At HUFP:- Electrical work in connection with construction of Goods office, labours and merchant facilities and (iii) At AYRN:- Concretization of wharf." is (i) Erection of LT or above voltage level distribution panels. (ii) Erection and commissioning of LT or above voltage level line (over head or underground). (iii) Electrification/Rewiring service buildings, bungalow and quarters. (iv) Supply and erection of tower light. (v) Lighting of station/ Administrative building / circulating area."
28 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Contractor should have to be registered with Employee Provident Fund Organization (EPFO). It is mandatory for contractor to submit PF code provided by EPFO with their tender offer. Also each contractor have to submit "UAN" of their worker with their offer and have to mention in tender document. It is mandatory. Otherwise offer will not be considered for further action and your offer will be summerisely rejected. You are also instructed to submit monthly payment challan to the person/labour engaged for execution of the work having valid UAN no with bill. This is to be followed strictly as per GCC & as per instruction of labour enforcement officer under Govt of India.
Inclusion of 'Letter of Credit' as Mode of Payment in Works Tenders or Service Tenders as per Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2016 remarks from Tenderer required.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Railway Administration reserves the right to change/Alter/Cancel the tender without any notice.
(i) At BGS :- Electrical work in connection with improvement of station building with provision of 2nd entry, extension of FOB and additional PF shed with replacement of AC Sheet of PF. (ii) At HUFP:- Electrical work in connection with construction of Goods office, labours and merchant facilities and (iii) At AYRN:- Concretization of wharf.
L-Open-25-26-17Dt05-12-25~ECR
L-Open-25-26-17Dt05-12-25
Open
Works - General
180 Days
Saran, Bihar
₹0
₹1.3 L
27 Dec 2025
5 Dec 2025
13 Dec 2025
233 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 26,12,670.4 | ||
| — | 100.00 | — | — | ||
| Wiring of light point with 1.5 Sq.mm FR PVC insulated Copper conductor single core multistrand cable in concealed/surface PVC heavy gauge conduit and earthing point with 1.5 sq.mm FR PVC insulated copper wire. | — | — | — | 39,800 | |
| — | 40.00 | — | — | ||
| Wiring of Ceiling/Exhaust fan point with 1.5 Sq.mm FR PVC insulated Copper conductor single core multistrand cable in concealed/surface PVC heavy gauge conduit and earthing point with 1.5 sq.mm FR PVC insulated copper wire. Earthing the fan & regulator. | — | — | — | 16,800 | |
| — | 45.00 | — | — | ||
| Wiring for 5 pin 5 Amp. plug point with 1.5 Sq.mm FR PVC insulated Copper conductor single core multistrand cable in concealed/surface PVC heavy gauge conduit and earthing point with 1.5 sq.mm FR PVC insulated copper wire including supply & fixing of 5 pin, 5 Amp socket outlet , 5 amp switch. piano type earthing the third/fifth pin etc. as required. | — | — | — | 12,060 | |
| — | 40.00 | — | — | ||
| Supply, fixing, connection, and testing of 6 pin 16Amp. power plug socket with 2X 2.5 Sq.mm FR PVC insulated copper conductor single core cable in concealed/surface/recessed PVC insulated copper conduit along 1 no.2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. | — | — | — | 7,920 | |
| — | 850.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X2.5 sq.mm+1X2.5 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. | — | — | — | 86,700 | |
| — | 450.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X4 sq.mm+1X4 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. The work shall be done as per CPWD Pt. I, manual (1972) for general specification of electrical work. All materials should be IS marked. | — | — | — | 50,850 | |
| — | 250.00 | — | — | ||
| Wiring for submain along with earth wire with the size 2X6 sq.mm+1X6 sq.mm earth wire of PVC insulated copper conductor, single core cable in concealed/ surface/recessed PVC heavy gauge conduit as required. | — | — | — | 31,250 | |
| — | 8.00 | — | — | ||
| Supply of 4 way MCB- DB. | — | — | — | 3,560 | |
| — | 32.00 | — | — | ||
| Supply of MCB 6-32A. | — | — | — | 6,240 | |
| — | 8.00 | — | — | ||
| Fixing & commissioning of MCB- DB with MCB. | — | — | — | 616 | |
| — | 15.00 | — | — | ||
| GI pipe earthing with 4.5 M long x40mm dia. With salt & charcoal. | — | — | — | 25,500 | |
| — | 300.00 | — | — | ||
| Supply & Laying of 6 SWG GI wire as conductor earth electrode. | — | — | — | 3,600 | |
| — | 100.00 | — | — | ||
| Supply, installation, testing, commissioning of 40 W LED (4 ft) indoor type for surface and pendent tube light fitting with LED tube voltage range 90v-300v AC. Wiring/connection of fitting with not less than 1.5 sq.mm cu. Similar to Bajaj batten and tube cat. no. BCLB 40W LED P. Wire through PVC flexible pipes. Fixing of fitting with aluminium clamps and steel nut-bolts. Make:-Havells, C&S, Bajaj, Phillips Crompton & Panasonic. Warrantee 05 Years from the date of installation. | — | — | — | 1,25,000 | |
| — | 30.00 | — | — | ||
| Supply of 1200 mm sweep 5 star rating ceiling fan with capacitor type fan regulator. | — | — | — | 66,300 | |
| — | 30.00 | — | — | ||
| Fixing of ceiling fan. | — | — | — | 1,980 | |
| — | 10.00 | — | — | ||
| Supply of 300 mm sweep Exhaust Fan 4 pole. | — | — | — | 24,330 | |
| — | 10.00 | — | — | ||
| Fixing & commissioning of Exhaust Fan complete. | — | — | — | 1,570 | |
| — | 40.00 | — | — | ||
| Supply & fixing of MS sheet metal recess type board comp. of size.8"x12"x3" | — | — | — | 7,800 | |
| — | 45.00 | — | — | ||
| Supply & fix. Of MS sheet metal recess type board comp. of size.6"x4"x3" | — | — | — | 4,905 | |
| — | 2355.00 | — | — | ||
| Laying of LT cable direct in ground of size 25-120 sq.mm complete. | — | — | — | 2,51,985 | |
| — | 30.00 | — | — | ||
| Wiring of 5 Amp. Point single core 1.5 sq.mm copper wire for Light Point/Fan Point on platform surface, trusses including supply and fixing of ceiling rose board, fuse kit-kat, indicator and connection etc with all other accessories complete in all respect. PVC board make - cany/classic/Harson. Ceiling rose fuse kit-kat, indicator make - Havells, HPL, Cona. | — | — | — | 6,150 | |
| — | 1000.00 | — | — | ||
| Drg. of S/C upto 70 sq.mm. LT cable complete. | — | — | — | 34,500 | |
| — | 150.00 | — | — | ||
| Supply and fixing of MS flat iron bracket 50x6mm for 4 nos. conductors with suitable arrangement. | — | — | — | 12,075 | |
| — | 100.00 | — | — | ||
| Supply & fixing of LT shackle insulator 75x90mm. | — | — | — | 5,200 | |
| — | 50.00 | — | — | ||
| Supply & fixing of medium class GI pipe 50mm dia. Make TATA/Jindal For protection of UG cable. | — | — | — | 17,250 | |
| — | 3.60 | — | — | ||
| Design, fabrication, supply, installation, testing & commissioning of cubical LT panel board suitable for incorporating Ammeter, voltmeter, indication miniature neon lamps, COS, MCCBs, and bus bar etc. as as per site requirement/drawing. (3.6 Cu. Mtr. per station). | — | — | — | 9,500.4 | |
| — | 1.20 | — | — | ||
| Supply, Installation, Testing & Commissioning of CU bus bar 600A cap. of size 50x8mm. | — | — | — | 10,764 | |
| — | 1.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of panel type voltmeter, ammeter, S. switch, neon lamps. | — | — | — | 3,686 | |
| — | 16.00 | — | — | ||
| Supply of CU stripes of suitable size. | — | — | — | 8,928 | |
| — | 2.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of MCCB 200A cap. | — | — | — | 26,656 | |
| — | 2.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of MCCB 100A cap. | — | — | — | 8,690 | |
| — | 4.00 | — | — | ||
| Supply & fixing of 4 strips CU BBC 300mm long of 100A cap. | — | — | — | 22,668 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 4 pole MCCB 100A with enclosure. | — | — | — | 33,344 | |
| — | 40.00 | — | — | ||
| Supply, delivery & Fixing of octagonal pole hot Dip Galvanized in single dip average 70 micron DFT, designed for maximum wind speed of 169KM/Hr.,BOP-7030 type pole of 6 m long, top dia 70mm, bottom dia. 130mm sheet thickness 3mm, in single section with Base plate (220x220x12)mm (LxBxT) with 4x20mm dia. 700mm long with 100mm projection foundation bolt complete with smart pack junction box with bakelite sheet, 6A MCB & stud terminals (for mounting inside base component of pole) and internal wiring for terminal to fitting with 2x2.5 sq.mm cable including single arm bracket 1 mtr. long suitable for 3 to 10 mtr. pole of reputed make. Make - Bajaj, Transrail, Bansal, Jindal, Gammon Group. | — | — | — | 5,31,160 | |
| — | 40.00 | — | — | ||
| Making of foundation suitable for 3 to 8 mtrs. octagonal pole as per site in- charge/4'X4'X4'manufacturer dimension & as per site requirement. | — | — | — | 2,00,000 | |
| — | 40.00 | — | — | ||
| Supply of (out door) 45 W LED street light luminaire made of pressure die cast aluminium housing LED street light luminaires with IP66, Surya Product Code- SLE UL 45 W IP66 LXN. Make of luminaire & Tube- Philips, Surya, Bajaj, Crompton Greaves. | — | — | — | 1,79,680 | |
| — | 40.00 | — | — | ||
| Installation, testing & Commissioning of LED street light fitting complete with all accessories on wall/bracket on rail pole/tubular pole including connection with 1.5 sq. mm Cu. conductor S/C stranded cable with heavy duty conduit pipe PVC insulated weather proof earthing the body complete etc. as required. | — | — | — | 11,440 | |
| — | 1.00 | — | — | ||
| Supply, Installation, testing and commissioning of 20 Mt. Hot dip galvanized suitable for wind velocity of 50 M/Sec as per IS 875 Part 3 1987 latest version high mast system along with head frame, steel wire rope, double drum winch, galvanized lantern carriage suitable for 8 luminaries & its CG boxes & lightning finial, integral type high powered reversible power tool for raising and lowering of lantern carriage, gear box coupled with the winch & torque limiter, foundation bolt of special steel with nuts washers, anchor plates, templates, LED beam flood light luminaries 200 W, shallow foundation considering the safe soil bearing capacity at site as 10 T/Sq. Mtr. at 2 Mtr Depth, twin dome aviation obstruction light, heavy gauge hot dipped galvanized lighting finals, feeder panel comprising main incoming switch MCB's time switch, contactor, reversing starter and protective system etc. as required and maintenance free earthing etc. | — | — | — | 6,07,445 | |
| — | 1.00 | — | — | ||
| Installation, testing & commissioning of water cooler upto 150 ltrs./hr. capacity | — | — | — | 553 | |
| — | 1.00 | — | — | ||
| Supply of automatic relay type single phase voltage stabilizer 5kVA cap. With delay timer 1-2 min. high low cut off, Input voltage 130-280 volt. | — | — | — | 6,850 | |
| — | 1.00 | — | — | ||
| Fixing & commissioning of 5kVA stabilizer. | — | — | — | 165 | |
| — | 100.00 | — | — | ||
| Fabrication as per site requirement and erection on pre erected steel tubular/rail pole/Cage for water cooler of MS Cross Arm bracket with nut bolt, clamp etc including supply of cross arm bracket Nut-bolt, clamp etc. | — | — | — | 8,200 | |
| — | 2.00 | — | — | ||
| Supply at site, installation, testing and commissioning of Color light signaling panel with automatic operation on 3 source of supply capacity 60 Amp. approved by RDSO/LKO connection on incoming as well as outgoing, testing of frequency of changing over from one source of supply to another source of supply. Make JAPS or similar RDSO approved. | — | — | — | 99,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .