Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.7 LAccepted-AOC S NO 41 4K JAIHIND SOCIETY GANESH NAGAR NEAR ANAND PARK VADGAON SHERI PUNE 411 014 | PUNE | PUNE | MAHARASHTRA | 411014 | L1 | Accepted-AOC LOWEST QUOTED BIDDER | |
| 2 | L2₹68.4 L+₹4.7 L (7.31%)Rejected-Finance FLAT NO 03 PANCHAVATI BUILDING ADARSH NAGAR CHICALIM GOA 403711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SECUNDERABAD
CWE AF SECUNDERABAD BOWENPALLY POST SECUNDERABAD 500011
PROVISION OF HYDRANT SYSTEM AND EMERGENCY EXISTS AT SRE BUILDING AT AIR FORCE STATION BIDAR
2022_MES_567128_1
85579/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF BIDAR
AS PER NIT
9 documents required · 9 mandatory
₹1,000
GE AF BIDAR
₹1.1 L
Yes
17 Jan 2023
3 Dec 2022
14 Jan 2023
3 Dec 2022
12 Jan 2023
24 Dec 2022
3 Dec 2022 - 20 Dec 2022
Amount
Demolition of brick work or stone / boulder masonary built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in hard / dense soil etc complete all as specified and as directed.
M&L for PCC 1:2:4 type B-2 mix (using 40 mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specifiedand as directed.
M&L for RCC (Design Mix) M-25 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and as directed.
S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends binding with and including mild steel wire not less then 0.9 mm dia or securing with clips quality conforming complete all as specified and as directed.
Description all as per Ser item No 7 above but 5 mm dia and over upto and including 10 mm dia as in stirrups spacers and binders etc complete all as specified and as directed
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work like vertical or to batter rough finished flat surfaces complete all as specified and as directed.
S&F rolled mild steel sections confirming to Fe-410W (Gde E-250) quality A as in main and cross beams, hip and jack rafters, pulins where connected to common rafter and running rails guides for sliding doors fixed with angle cleats or other connecting plates etc including necessaty welding to connect the sections complete all as specified and as directed.
S&F rolled mild steel confirming to Fe-410W (Gde E-250) quality 'A' as in stairs (framed) including balusters, hand rails, etc including cleats, brackets, etc complete all as per drawing and as directed
S&F mild steel chequered plate of any thickness for landing, steps, risers, channesl, square cut or notched (ordinary or counter sunk) forming holes without any attachement confirming to Fe-410W (Gde E-250) quality 'A' including necessary welding, etc complete all as per drawing and as directed
S&F steel work as in wind ties for roof including securing bolts and similar works confirming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for Preparation of new Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F mild steel anchor screw bolts exc 22.5 cm and not exc 30 cm long and dia 16 - 20 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut including fixing same in the concrete complete all as specified and as directed.
S&F steel work for plates (plain or chequered) of 5 mm thick or more as in base plates for columns and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and as directed.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and as directed.
S&F FRP door frames of cross section 36 mm x 36 mm having single rebate of 26 mm x 15 mm to receive shutter of 26 mm thickness. The lamination shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminaton shall be of 2 mm thick and filled with suitable wooden block in all three legs. The frame shall be covered with fibre glass frame all sides. MS stay shall be provided at the bottom and to sides to fix with existing wall and to steady the frame all as shown in drawing complete all as specified and as directed.
S&F FRP door shutters of required coloured and approved brand, made of fire resistant grade unsaturated polyster resin and moulded 3mm thick FRP laminated for forming hollow rails and styles, with wooden frame and suitable wooden blocks of seasoned wood inside at required places for fixing of fittings, etc conforming to IS 14856-2000 all as shown in drawing complete all as specified and as directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.
S&F aluminium anodized barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and as directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.
S&F butt hinges 100 mm long cast brass with mild steel hinges pin, bright polished and fixed, type B-11 complete all as specified and as directed.
S&F door stopper 150 mm long aluminium alloy body and tounge, anodised with hard drawn steel spring complete all as specified and as directed.
S&F door closer aluminium (extruded section) hydraucally regulated designation No 03 universal type suitable for door shutter of 851 to 1200 mm in widthand weight between 61 to 80 kg complete all as specified and as directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width type C1 PCC 1:3:6 (using 20 mm graded stone aggregate) and setting in cement mortar 1:6, complete all as specified and as directed.
M&L rendering 15 mm thick in two layers (5 mm thick finised layer over 10 mm thick base layer) on fair faces of brick work or concrete surfaces in CM 1:4 and rerndeing is to be finished even and smooth with out using extra cement with WPC complete all as specified and as directed. (Note :- WPC will be measured and paid seperately)
Supply only Integral water proofing admixture liquid water proofing compound complete all as specified and as directed.
M&L for finishing walls with Acrylic smooth exterior paint of required shade and pattern as directed (Two or more coats applied @1.67 ltr /10 sqm over and including priming coat of extrerior primer applied @ 2.20 Kg /10 Sqm) at any height including preparation of new plastered surfaces complete all as specified and as directed.
M&L for finishing walls with Acrylic smooth exterior paint of required shade and pattern as directed (Two or more coats applied @1.67 ltr /10 sqm over and including priming coat of extrerior primer applied @ 2.20 Kg /10 Sqm) at any height including complete removal of existing treatment complete all as specified and as directed.
M&L for hardcore of broken stone or boulders of gauge n exc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 100 mm thick Plain cement concrete 1:4:8 type D-2, mix (using 40 mm graded stone aggregate) as in sub base, sub floors, base floors etc complete all as specified and as directed.
M&L for sand filling for laying paver blocks including watering and consolidation complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments including coping with PCC 1:3:6 (using 20 mm graded stone aggregate) to fill the joint with kerb complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cills, steps, seismic, bands, coping, bed plates, kerb, water troughs and the like including weathering, slightly rounded or chamfered angles, etc complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and as directed.
Removing of excavated materials to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Supplying and assembling including jointing, fixing in position MS ERW pipe fine cut of internal dia 150 mm bore of thickness 5.4 mm confirming to IS 1239 (ISI marked) including sockets and jointing length of pipe by mild steel socket threaded by electric arc welding both sides etc for fire hydrands ncluding painting, the pipes with single coat of epoxy primer and two coats of red enamelled paint complete all as specified and as directed.
Supplying and assembling including jointing, fixing in position MS ERW pipe fine cut of internal dia 100 mm bore of thickness 5.4 mm confirming to IS 1239 (ISI marked) including sockets and jointing length of pipe by mild steel socket threaded by electric arc welding both sides etc for fire hydrands ncluding painting, the pipes with single coat of epoxy primer and two coats of red enamelled paint complete all as specified and as directed.
Supply, jointing, testing and laying in trenches / floor / wall etc pipes galvanised iron "Medium grade" ISI marked with all running fittings of size 20 mm bore complete all as specified and as directed.
Supply, install, testing and commissioning of CI Non-Return (Reflux) Valve 150 mm bore, both end flanged, class PN 1.6, ISI marked conforming to IS 5312 (Part I & II) including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and as directed.
Supply, install, testing and commissioning of Butterfly Valve 150 mm bore, both end flanged, class PN 1.6, ISI marked conforming to IS 5312 (Part I & II) including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and as directed.
Supply, install, testing and commissioning of Butterfly Valve 100 mm bore, both end flanged, class PN 1.6, ISI marked conforming to IS 5312 (Part I & II) including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and as directed.
Supply, installation, testing and commissioning of fire hydrant 63 mm dia gun metal landing valve type B (single head out let) ISI marked (IS-5290) complete with hose coupling adopter of size 63 mm, instantneous spring lock arrangement and blank cap with chain, fixed with stand post of height 1.5 mtr conforming to IS 908 complete all as specified and as directed. Note :- MS pipe for stand post shall only be measured and paid separetely.
S&F Hose box made of 18 gauge MS Sheet 800 mm X 600 mm X 250 mm with double door with glasses , clear glass of 5 mm thick and the glass shall be firmly fix by means of steel clips , screws , lock , 2 keys and a break glass , recess for keys with suitable stand grouted on ground , painted in fire red . The door frame made of 16 gauge MS sheet. The hose box shall be painted fire red out side and brilliant white inside and conforming to relevant IS specifications complete all as specified and as directed. Note :- Nozzle shall be measured and paid separately
S&F hose pipe of length 15 mtr each 63 mm dia synthetic fibre , circular oven jacketed , treated against hot working pressure 12 Kg / sqcm , burst pressure 36 Kg / sqcm with gun metal instantaneous coupling , male and female , heavy duty etc conforming to relevant IS with ISI marked complete all as specified and as directed.
S&F Gun metal branch pipe with gun metal nozzle 16 mm dia out let with standard make instantaneous spring lock type 63 mm dia coupling conforming to IS 903 and ISI marked and TAC approval complete all as specified and as directed
Supply and fix hose reel drum of diameter for 600 mm with hose of pipe high pressure rubberised 19 mm dia, 30 mtr length, suitable working pressure and burst pressure, fitted gun metal nozzle 6 mm outlet with shut off valve nozzle with suitable fixing arrangement, conforming to IS 884-1985, heavy quality bearing etc conforming to IS 5132 with ISI marked and TAC approval complete including shut Off valve of suitable size complete all as specified and as directed.
Supply and fix 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply , fixing ,testing and commissioning Reinforced concrete pipeof dia 250 mm, class NP2, laid and jointed complete with collars complete all as specified and as directed .
M & L for Pit masonary for valves constructed with dimensions 1100 mm x 1100 mm x 900 mm suitable for sluice valves upto 150 mm with PCC 1:4:8 Type D-2 mix for foundation laterice stone measonery wall in CM 1 :6 and alternate shall be chisel dressed to proper size PCC 1:2:4 type B-1 for coping rendering 15 mm thick in CM 1:4 both side including provision of MS sheet cover fabricated out of 3 mm thick sheet with angle iron frame made out of 40 mm x 40 mm x 6 mm and locking arrangement including painting with two coats of synthetic enamel paint over a coat of red oxide primer, excavation and earth work complete all as specified and as directed.
M/s. P S REDDY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .