RD road to Kadobahal_Road_Pot hole repair and and SDBC_0.000 to 2.920

Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge

Providing ,laying ,spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant ,carriage of mixed materials by tipper to site ,laying in uniform layers with pave .

Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60 kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works.

Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 0.25 to 0.30 Kg/ Sqm on prepared bituminous surface using mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision).

Providing and laying Semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled,vibratory roller and tandem rollers to achieve the desired compaction as per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision)

Construction of moorum t shoulder with approaved materials obtained from borrow pits, transporting to site, spreading, grading to required slope and compacting to meet requirement as per direction of Engineer-in-charge .

Providing & fixing of retro-reflectiorised cautionary ,mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mmx 75 mmx6 mm firmly fixed to the by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60 cm ,60 cm below ground level as per approved drawing 1200 mmx900mmx rectangle main information board

Providing and laying of hot applied thermoplasic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area ,thickness of 2.5 mm is exclusive of sueface applied glass beads as per IRC:35 .The finished surface to be level ,uniform and free from steaks and holes