REPAIRS AND DAY TO DAY MAINTANANCE WORKS TO FLOOR WALL ROOF SANITARYFITTINGS JOINERIES CLEANING OF OVERHEADTANKS INTERNAL WATER SUPPLY TO MD ACCNS BLDGS IN DERA COMPLEX VARSHA VARUNA APARTMENTS AT SATELLITE AREA AND DAD COMPLEX THEVARA UNDER GE NW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for glazed ceramic coloured designed straight edge tiles 7mm thick area of tiles of 300x450/300x600 on vertical surfaces such as skirting or dados laid over and incl cement mortar backing coat in CM 1:4, 10mm thick and jointed with neat cement slurry and pointed in white or coloured cement to match on skirting/dado all as specified and directed.

M&L for Non Skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm on floors over and incl 15mm thick screed bed or bedding layer of mortar in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match specified and directed

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.38 Sqm in floor etc and pointed in white and coloured cement to match over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and directed

S&F Vitrified tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in floors with using 3mm wide tile spacers and dados etc. set and pointed with using epoxy tile joint filling and jointed in neat cement slurry to match over and incl 15mm thick screed bed or bedding layer of mortar in CM 1:4 all as specified and directed

S&F Vitrified tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm, in vertical surfaces with and incl 10mm thick cement plaster 1:4, with epoxy joint filling as skirting and pointed in white or coloured cement all as specified and directed Note :- Fixing of tiles shall be with using 3mm wide tile spacers

M&L for minor masonry work such as joint filling of floor/ wall tiles with epoxy, making 3mm wide and 3mm deep joint grooves to arrest leakage seepage and racking out of old tile joints all as specified and directed

M&L for minor masonry work such as racking out joint and filling with Dr Fixit crack filler and refixing of loose existing tile if any in floor/ wall tiles,complete all as specified and directed

Attending day to day complaints related to water supply & plumbing work such as leakage of bib cock,/pillar cock/ stop cock / angle valve, stop cocks , mixer vlaves, health faucet,PVC connections, float valves of Fushing cistern of any description, replacing the washers, cleaning of air lock in the pipe complete all as specified and directed.

Note for item No.9:- (a) The cost of material such as threads, washers, lead etc shall be included in the quoted rate. (b) Rectification of leakage by replacing tap washers, tightening the handle/knob/nuts/screws, tightening loosely fitted tap, replacement of thread seal tape/cotton thread, removing any blockage from tap or PVC connection pipe, tightening PVC connection pipe etc will be treated as minor / petty repairs. (c) Tap washers, washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement etc shall be treated as minor items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same. (d) item shall be executed as per Complaint slips issued from AGE B/R I office.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

Demolition of brick / stone /boulder works built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed

M&L precast cement concrete block masonry 1;3;6 Type C1 with solid blocks exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for precast cement concrete louvers and jallies, 50 mm thick, 1:2:4 type B0 (12.5 mm graded stone aggregate) including all mouldings but excluding frame set in CM 1:6.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L in repair chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over and incl 20 mm thick screed bed in CM 1;6 and including taking down old tiles complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (EWC), any colour, pedestal pattern fixed complete all as specified and directed.

S&F in repair Plastic seat cover, any colour closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked fixed complete all as specified and directed.

S & F in repair PVC connection 15mm bore 45cm long with brass coupling complete all as specified and directed.

S&F in repair white glazed vitreous china WHB flat back size 550x400 mm including CI bracket and PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified . and directed.

S&F in repair 100 mm dia stainless steel grating complete all as specified and directed.

S&F of Brass Chromium plated waste coupling 32 mm dia suitable to WHB/ sink complete all as specified and directed.

S&F in repair 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin/ sink complete all as specified and directed

M&L in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed

S & Fin repairs Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed complete all as specified and directed

S & F in repair Bib cock 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed complete all as specified and directed

S & F in repair Twoway Bib cock 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed complete all as specified and directed

S&F in repair stainless steel tubular towel rail 20mm dia , 600mm long (Brass chromium plated), all as specified and directed Make :-Parryware Cat No.T6201A1 or equivalent model of other manufactureres from the list.

S&F in repairs CP health faucet including flexible ss pipe of 1m length and fittings such as wall clamps all as specified and directed Make :- JAQUAR Cat No ALD 587 or equivalent model of other manufactureres from the list.

M&L for cutting and grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and directed

S&F stainless steel sink with draining board made out of 1.0mm thick shet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410 X 330 X 160mm all as specified and directed

Taking down rainwater pipe,eaves gutter and AC vent pipe of any size including AC gutters,etc including all fittings complete all as specified and directed

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110mm bore complete all as specified and directed

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75mm bore complete all as specified and directed

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints laid in floor 75mm bore complete all as specified and directed

S&F PVC(SWR) bends any radius to fit to 110mm bore pipe with access door complete all as specified and directed

S&F PVC(SWR) bends any radius to fit 75mm bore pipe with access door complete all as specified and directed

M&L beading of 20mm width of 3mm thick standard hard board 20mm thick fixinfg with screws complete all as specified and directed

PVC(SWR) branch piece, single (Single Y ) equal or uneaqual 75mm bore complete all as specified and directed

PVC(SWR) branch piece, single (Single Y ) equal or uneaqual 110mm bore complete all as specified and directed

PVC (SWR) junction single, (Single T ) equal or uneaqual 75mm bore complete all as specified and directed

PVC (SWR) junction single, (Single T ) equal or uneaqual 110mm bore complete all as specified and directed

Taking down chowkats but with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm complete all as specified and directed

All as per item No.46 above but area exc 1.5 Sqm but n.exc 4 Sqm

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed

All as per item No. 48 above but area exc 1 Sqm but n.exc 2 Sqm

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

M&L 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

M&L 2nd class HW 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

M&L 2nd class HW 30mm thick Glazed and skeleton window / ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

Repairs to shutters without taking down of any description exceeding 1.0 Sqm and not exceeding 2 Sqm including resecuring or easing and adjusting in same opening complete all as specified and directed

S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each plane complete all as specified and as directed

All as per item No.59 above but fixed in repair.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

All as per item No.61 above but fixed in repair.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, and fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board(styles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

M&L for repair (only) to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot,repairs to lock,handle,rubber beadings etc complete all as specified and directed

M&L for repair (only) to aluminium window of any size, pattern and any number of shutter & making good and functional including changing of pivot, replacement of rollers, friction hinges repairs to lock,handle,rubber beadings etc complete all as specified and directed

M&L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing holdfast including necessary form work complete all as specified and directed

S&F MS holdfast made out of FI 25x3mm complete all as specified and directed

S&F 200mm long Aluminium anodised barrel tower bolt complete all as specified and directed

All as per item No. 69 above but 100mm long

S&F 200mm long Aluminium anodised sliding bolt complete all as specified and directed

All as per item No. 71 above but 100mm long

S&F 125mm long Aluminium anodised handle complete all as specified and directed

All as per item No. 73 above but 100mm long

S&F 100mm stainless steel butt hinges,medium weight cold rolled complete all as specified and directed

All as per item No.75 above but 75mm long

S&F Continuous Piano hinges (30 cm width of flaps) MS, bright finish or electrogalvanised complete all as specified and directed

S&F in repairs 375mm mild steel, ordinary rat tail pattern springs including roller and plate complete all as specified and directed

S&F in repairs mortice lock vertical type, size 75mm 2 leversbrass ,complete all as specified and directed

S&F repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and directed

S&F hasp and staple 100mm, safety type aluminium anodised with in hinges including bolt to hinges plate and fixed with screws complete all as specified and directed

S&F floor door stopper of aluminiumalloy body and tongue, anodised, with hard drawn steel spring 140mm complete all as specified and directed

S& F in repair flushing cistern with syphon set complete internal for flush tank 10 Ltrs capacity push button for single layer for PVC flush complete all as specified and directed

Taking down cement plaster on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with watercomplete all as specified and as directed

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:4) with WPC finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately. Dosage shall be as per mnufactureres instructions.

M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:4) with WPC finished even and smooth with using extra cement as neeru finish complete all as specified and as directed. Note:- WPC shall be measured and paid separately. Dosage shall be as per mnufactureres instructions.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed .

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed

Supply only Liquid water proofing compound complete all as specified and as directed

M&L preperation of new decorated surfaces of ceiling (plastered or unplastered) including cornices and applying three coats of white wash on ceiling complete all as specified and as directed .

M&L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .

M&L preperation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coats of cement base paint over a coat of priming complete all as specified and as directed

Removal of vegetation /shurbs on unaccessible roofs or protections etc and spraying of acid of required quantity complete from any location of building and making good disturbed surfaces with cement mortar 1:4 or cement concrete type C1 1:3:6, using 20mm graded aggregate including necessary scaffolding complete all as specified and as directed.

Repairs (only) to shutters without taking down of any description not exceeding 1.0 Sqm including resecuring or easing and adjusting in same opening complete all as specified and as directed.

S&F in repair 2nd class hard wood, small fittings such as brackets of any type latch and hinge blocks, shaped door and windows stops and the like including all necessary labours articles not exceeding 200 Cum each complete all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket) complete all as specified and as directed.

S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed.

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed .

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Roof trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed .

Cleaning vegetation growth over MP Tiles roof , RCC roof, chajja etc up to two story complete all as specified and as directed .

M&L in repairs 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work complete all as specified and as directed .

S&F Aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangements complete with using following section :- (i) Outer frame 50.80x25.40x1.5mm (ii) 3 Track frame 43.66x22x1.22mm (iii) Shutter frame 31.80x14.50x1.20mm (iv) Shutter interlock 31.80x20.50x1.20mm

S&F Aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed .

S&F Aluminium Powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed .

S&F Aluminium Powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed .

S&F in repairs 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed .

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Parryware Cart Part No.T3102A1 or equivalent model of Hindware/Cera

M&L in repairs 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work complete all as specified and as directed.

M&L in repair for 5mm thick Solid PVC Wall Lining consisting of 5mm thick prelam colour PVC sheet inclusive of solvent cement and fixing including cover fillet at site on PVC frame as per specifications and drawing

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F in repairs aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) with out sash bar,including all necessary jointing leats,hold fasts,hinges with fixing clips,rubber gasket,anodised snap beading,anodised aluminium fittings,locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for partition is catlogue No 9223 of size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and as directed .

S&F in repairs aluminium anodised powder coated frame work for door with out sash bar,including all necessary jointing cleats,hold fasts,hinges with fixing clips,rubber gasket,anodised snap beading,anodised aluminium fittings,locking arrangement etc (minimum thickness of powder coating 50 micron). Section used for door are catlogue No 9258 of size 50x44.50x1.80 mm door vertical stiles, catlogue No 9286 of size 50x45x1.50 mm door Top and middle /lock rail,catlogue No 9246 of size 100 x44.50x1.85 mm door bottom rail, of Hindalco or equivalent make as approved by GE complete all as specified and as directed .

M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy-to-peel silicon film on the other side on roof including cleaning and preparation of surface complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 m thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyster matt not less than 160 g/sqm, having softening point not less than 1400 C longitidunal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bitmininous aluminium paint @ 100 g/sqm, complete all as specified and as directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment complete including dismantiling old one all as specified and as directed by Engr-in-Charge.

S&F Ball bearing runners 45 mm, 500 mm longTelescopic ball bearing drawer channel full extension load capacity 50 kgs, complete all as specified and directed.

S&F in repairs stainless steel auto closer counter sunk hinges complete all as specified and directed.

S&F in repairs 100mm long stainless steel handle complete all as and as directed

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

M&L for 40mm thick PCC type B 0 1:2:4 (using 12.5mm graded aggregate ) as in repair top surface of pavement and flooring etc. and surfacefinished even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and as directed.

M&L Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, intels, etc.; and cutting chases for dampproofing course, etc., and making good, cutting exc 20 cm girth complete all as specified and as directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle copper alloy fancy chromium plated screwed down for 15 mm bore complete all as specified and as directed.

Fixed in repair bib tap/ stop cock /angle valve any bore dia any type of 15mm dia including repairing and replacing spindle/washer etc and refixing complete all as specified and as directed.

All as per Item No.136 above but pillar tap 15mm dia

S&F Angle Stop valves, cast copper alloy chromiun plated fancy type screwed down for 15 mm bore pipe complete all as specified and as directed.

S&F Angle Stop valves, cast copper alloy chromiun plated screwed down for 20 mm bore pipe complete all as specified and as directed.

Supply and fixing in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal to store 15mm complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal to store 20mm complete all as specified and as directed.

S&F Kitchen utensil stand stainless steel of size 75 x 75 cm complete all as specified and directed

Taking down steel tubing and connections incl cleaning for refixing or removal to store 25/32mm complete all as specified and as directed.

Supply and laying SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor complete 16mm outer dia complete all as specified and as directed.

Supply and layin SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor complete 20mm outer dia complete all as specified and as directed.

Supply and layin SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor complete 25mm outer dia complete all as specified and as directed.

S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shutter complete all as specified and as directed .

Material and Labour for scrubbing, cleaning etc thoroughly, HDPE service tank of 750 to 1000 ltr Capacity situated in different locations at satalite area, including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 mtrs, including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY AND DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , all as specified and directed. Note :- Each tank can be cleaned several times, each time measured and paid.

All as per Item No. 149 above but 500 Ltr capacity complete all as specified and directed .

All as per Item No. 149 above but 250 to 300 Ltr capacity complete all as specified and directed .

Material and Labour for scrubbing, cleaning etc thoroughly,RCC OH service tank 20,000 Ltr capacity situated in different locations at satalite area including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 mtrs white washing of inner portion of tank, including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY AND DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , all as specified and directed . Note :- Each tank can be cleaned several times, each time measured and paid.

All as per Item No 5 above 15,000 Ltr capacity compleate all as specified and directed .

All as per Item No 5 above 10,000 Ltrs capacity compleate all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 lts capacity (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia PTMT float valve complete all as specified in SSR Part I

ST ANTONY CONSTRUCTIONS

M/s T.P SHAJI