Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC | ₹6.3 L | L1 | Accepted-AOC 1 st lowest |
| 2 | L2₹7.3 LRejected-Finance | ₹7.3 L | L2 | Rejected-Finance 2 nd lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical 3 rd lowest |
| 4 | Rejected-Technical | - | - | Rejected-Technical 4 th lowest |
| Sl No | Description | Qty | Unit | BABU L1 | Joy S S L4 | SHRAFUDDIN P L2 | AJTHKUMAR R L3 |
|---|---|---|---|---|---|---|---|
| 1.00building | |||||||
| 1.00 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 130.7 | sqm | 1,475.84 ₹1.9 L | 1,796 ₹2.3 L | 1,722.45 ₹2.3 L | 1,725.17 ₹2.3 L |
| 1.00 | 17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | 1 | each | 2,126.11 ₹2,126.11 | 2,589 ₹2,589 | 2,481.38 ₹2,481.38 | 2,485.3 ₹2,485.30 |
| 1.00 | 50.18.8.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2 | 9.5 | metre | 414.89 ₹3,941.46 | 510 ₹4,845 | 484.22 ₹4,600.09 | 484.98 ₹4,607.31 |
| 1.00 | 50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | 10 | metre | 536.11 ₹5,361.10 | 659 ₹6,590 | 625.69 ₹6,256.90 | 626.68 ₹6,266.80 |
| 1.00 | 50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow | 2 | no | 63.54 ₹127.08 | 78 ₹156 | 74.75 ₹149.50 | 74.87 ₹149.74 |
| 1.01 | 50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow | 2 | no | 56.96 ₹113.92 | 70 ₹140 | 66.48 ₹132.96 | 66.59 ₹133.18 |
| 1.01 | 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | 1 | each | 521.27 ₹521.27 | 641 ₹641 | 608.38 ₹608.38 | 609.34 ₹609.34 |
| 2.00Office cabin | |||||||
| 2.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 291.92 | kg | 485.76 ₹1.4 L | 591 ₹1.7 L | 566.93 ₹1.7 L | 567.82 ₹1.7 L |
Tender Value
₹7.7 L
EMD Value
₹19,280
Closing Date
3 Jan 2026, 5:00 pmClosed
Assistant Executive Engineer
Office of the Assistant Executive Engineer,PWD Buildings Sub Division, Neyyattinkara
GENERAL Civil Work including Cabin Work in the Office of the Deputy Commissioner Tax Payer Services Neyyattinkara work General Civil Work
2025_PWD_823840_1
PWD/BLDG/TR/12906/2023_5_1_1/2
Open Tender
Civil Works - Buildings
90 days
Neyyattinkara
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,700
₹19,280
9 Feb 2026
24 Dec 2025
6 Jan 2026
24 Dec 2025
3 Jan 2026
24 Dec 2025
Amount
building
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
50.18.8.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2
50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2
50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
Office cabin
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.
OD137536/2024-2025: Designing , fabricating , testing ,installing and fixing in position aluminium composite panel cladding , with open grooves for linear as well as curvilinear portion of the building ,for all heights and all lvels etc.providing and fixing of frame work made of special section , providing and fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shade made out of 4mm thick aluminium composite panel material consisting of 4mm thickFR grademineral core sandwiched between two Aluminium sheets ,Galvanised steel bolts $nuts 6mm dia and 25mm long round head, connecting clips , steel sofit cleat , joint filter , joint finisher , all drive screws ', hold fastener , intermediate channels etc ( with out scaffolding)
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
9.115:providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.
9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
9.101.1:Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete
9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
OD200515/2025-2026:Providing and fixing auto closing cabinet hinges with necessary screws etc complete.
OD200516/2025-2026:Labour engaged for cleaning the yard and disposal of waste materials.
OD200517/2025-2026:Labour engaged for carpentry works.
9.165.2:Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.100mm
9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm
OD200684/2025-2026:Providing and fixing cable manger.
SHRAFUDDIN P (BID ID -2451883)
AJTHKUMAR R (BID ID -2451918)
Joy S S (BID ID -2451902)
Bidder Name
Joy S S
AJTHKUMAR R
SHRAFUDDIN P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1380981.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
e-payment.pdf
Tender Documents • 0.02 MB
SBD.pdf
Additional Documents • 1.63 MB
BOQ_1380981.xls
BOQ • 0.32 MB
Affidavit.pdf
Other Document • 0.03 MB
Integritpact.pdf
Other Document • 0.01 MB
Declaration.pdf
Other Document • 0.01 MB
formoftender.pdf
Other Document • 0.05 MB
preliminaryagreement_compressed.pdf
Other Document • 0.02 MB
Download all tender documents and submit your bid