CONSTRUCTION OF ASTRO TURF HOCKEY GROUND WITH PAVILION AT SWARNIM GUJARAT SPORTS UNIVERSITY CAMPUS AT TA. DESAR, DIST: - VADODARA

No but may be In Figure In Words

more or less

1 Clearing and grubbing road land includding uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm removal of stumps of 5,832.29 Smt 2.84 Rupees Two Paise

tress cut earlier and disposal of unserviceable materials. EightyFour Only

A) By Mechanical means in area of light jungle.

2 ROAD WORK 94.00 Cmt 155.89 Rupees One Hundred

Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation) (D) From Borrow area within FiftyFive Paise EightyNine

2.0 Km. lead Only

3 Box cutting the road surface to proper slope & camber for making a base for road work including removing the excavated stuff, and depositing on the 381.00 Cmt 104.20 Rupees One Hundred

road side slopes as directed up to all Lead Four Paise Twenty Only

4 Rolling and Consolidating of soling including filling in depression which occurs during the process with power roller 8 tonne to 12 tonne. and compacting 7,283.00 Smt 22.36 Rupees TwentyTwo Paise

the bed as per specifications to core test 97% compacting complete in all respects to the entire satisfaction of the Engineer-in -charge. ThirtySix Only

5 Excavation for foundation upto 1.5M depth including sorting out and stacking of useful materials and disposing of the excavated stuff upto any 1,432.00 Cmt. 149.67 Rupees One Hundred

lead any kind of soil. FourtyNine Paise

SixtySeven Only

6 Excavation for foundation upto 1.5 mt. to 3.0 mt. including sorting out stacking of useful material & disposing of the excavated stuff upto any lead any 591.00 Cmt. 162.38 Rupees One Hundred

kind of soil. SixtyTwo Paise ThirtyEight

7 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and 1,088.36 Smt 96.40 Rupees NinetySix Paise

material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is Fourty Only

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is recommended as per I.S

8 Filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc. completed. 2,426.83 Cmt 460.19 Rupees Four Hundred

Sixty Paise Nineteen Only

9 Filling in plinth with murrum in layers of 20 cm. thickness including watering, ramming and consolidating etc. Complete. (brought from out side) 6,544.00 Cmt 289.06 Rupees Two Hundred

EightyNine Paise Six Only

10 Lime murrum Treatment 7,141.00 Smt 53.72 Rupees FiftyThree Paise

Manually making 50 mm dia holes up to 0.6 m depth at 0.6m c/c distance and including filling the same with 7.5% lime solution in three cycles and SeventyTwo Only

finally, filling the holes with lime mortar (1:1). Etc. complete as directed by engineer in charge.

11 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of 249.00 Cmt 2,435.97 Rupees Two Thousand

mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and Four Hundred ThirtyFive

compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With Paise NinetySeven Only

material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

12 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse 159.00 Cmt 3,455.21 Rupees Three Thousand

aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement Four Hundred FiftyFive

content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less Paise TwentyOne Only

than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne

vibratory roller, finishing and curing etc. complete as per direction of Engineerin- charge.

13 Providing and laying compacted W.B.M. 150,mm compacted thick of machine crushed B.T.,Metal of size 40 MM to 63 MM with using 20%, stone 989.00 Cmt 1,663.30 Rupees One Thousand Six

screenings (Grit ) and stone dust as ,filler including spreading , watering and ,consolidation by vibratory roller etc. complete. Hundred SixtyThree Paise

Thirty Only

14 Providing ,laying, spreading, and compacting ,graded stone aggregates to wet mix Macadam,150 mm compacted thick as per MORT & H ,Specification 1,616.00 Cmt 1,127.00 Rupees One Thousand

including premixing the ,material with water at OMC in mechanical ,mix plant, carriage of mixed material by ,tippers to site, laying in uniform layers One Hundred

with,paver in sub base/base course on well ,vibratory roller to achieve the desired, density. TwentySeven Only

15 Providing and applying primer coat in 2 layer with bitumen VG 30 60/70 Grade on prepared surface of granular base including clearing of road surface 6,591.00 56.19 Rupees FiftySix Paise

and spraying primer at the rate of 1 kg /1 sqm using mechanical means. Nineteen Only

16 Providing and laying 50 mm Thick Bitumious Mecadam B.T. Aggregate as per MORT & H specification and asphalt for tack coat @ 2.50 Kg./10 smt. with 739.00 MT 3,502.00 Rupees Three Thousand

Mechanical sprayer & Bitumen Grade VG-30 ) for mixing @ 40 Kg./Mt. i.e. 4 % by weight of total mix including heating and mixing the aggregate & Five Hundred Two Only

asphalt in continuous batch mix plant and spreading the same by sensor paver finisher & consolidation with vibratory roller including providing all

materials equipments, tools & plant, fire wood, oil, kerosene, labour charges etc. complete using contractor’s own machinery drum mix plant & paver

finisher etc. complete

17 Providing and laying 40 mm thick bitunenous concrete (BC) using B.T. stone chipping and aggregate as per Morth&H gradation and asphalt for tack coat 591.00 MT 4,516.81 Rupees Four Thousand

@ 2.5 kg kg/10 smt on B.T. surfaces and butumine grade 80/100 for mixing @ 60 kg / M.T. by weight of total mix i.e. (6.0 % by weight of total mix) Five Hundred Sixteen

including heating and asphalt and aggregates by continuous batching batch mix plant and spreading the same by paver finisher including rolling and Paise EightyOne Only

consolidation with 10-12 tonnes vibretory and power roller including flushing sand @ of 0.03 cumt/10smt and providing all materials, equipment, tolls

and plants, fire wood, oil:, kerosene, labour charges etc. and using contractor's own machineries drum mix plant and paver finisher etc. complete.

18 Providing and fixing up to 7 m height( Chainlink Fencing) with fabrication of M.S. Square Hollow Section vertical support of size 100x100x 5 mm and 1,132.00 Smt 3,354.21 Rupees Three Thousand

horizontal support of 72x72x 4 mm One on top, centre and bottom with galvanize chain link 50x50 - 10 guage jali fitted with 40x6 mm M.S. flat (Three Three Hundred FiftyFour

Horizontal, two verticle) including welding and erecting the same in position in cc block M25 of size up to 45x45x150 cms at 3 mtr C/C spacing with Paise TwentyOne Only

necessory excavation including two coats of oil Painting over single coat of primer etc complete as directed & including one open able gate 3' ft wide

and 7 ft in ht. including of two coats of oil paint on M.S. Structure etc. complete as per drawing given by architect & directed by Engineer in charge

19 Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and curing complete including 388.00 CMT 3,570.75 Rupees Three Thousand

cost of form work in (A) Foundation and plinth Five Hundred Seventy

Paise SeventyFive Only

20 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret 500.00 Rmt 361.64 Rupees Three Hundred

as per approved design and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. SixtyOne Paise SixtyFour

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

21 Providing and laying shot blasted non- interlocking, colour/gray paver blocks of specified thickness, size, grade of concrete and colour machine made 550.00 Smt 872.36 Rupees Eight Hundred

and blasting by automatic shot blasting machine and high density of as per approved sample of approved make for parking areas, service lanes, cross SeventyTwo Paise

over and other areas as mentioned in the drawing. Including providing and laying 50 to 80 mm thick average bedding layer of coarse sand below paver ThirtySix Only

block as per required grading and specification. Laid paver block shall be mechanically compacted. The work of the paving blocks shall be executed in

line and level by skilled mason of flooring work only. Small size of paver block with same specifications shall be used at residu or at end. It should be laid

in such a way

22 Providing andthat the no

fixing precutting

-cast ofRubber

Dyeblock to beDye

/steel necessary. If cutting

interlocking of paver

concrete block60mm

block shall bethick

with than cut of

grade by machine

concreteonly

M300and playing to be

numatic 1,942.00 Smt 686.90 Rupees Six Hundred

compressed/vibrated mechanically and as per approved design Confirming to IS15658:2006 including 35mm Sand layer for levelling and filling the joint EightySix Paise Ninety

with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. Only

23 Providing, laying controlled cement concrete M 250 and curing complete excluding the cost of form work and reinforcement for reinforced concrete 390.00 CMT 4,155.84 Rupees Four Thousand

work in: Up to Plinth Level. One Hundred FiftyFive

(A) Footing Paise EightyFour Only

24 Providing, laying controlled cement concrete M 250 and curing complete excluding the cost of form work and reinforcement for reinforced concrete 28.00 CMT 4,515.27 Rupees Four Thousand

work in: Column Five Hundred Fifteen

1A) Column upto plinth Paise TwentySeven Only

25 Providing, laying controlled cement concrete M 250 and curing complete excluding the cost of form work and reinforcement for reinforced concrete 114.00 CMT 4,593.22 Rupees Four Thousand

work in: Column Five Hundred NinetyThree

1B) Column ABOVE PLINTH Paise TwentyTwo Only

26 Providing and laying controlled cement concrete M-250 and curing complete excluding the cost of form work and reinforcement for reinforced 86.00 CMT 4,416.46 Rupees Four Thousand

concrete work in:Beam . Four Hundred Sixteen

A) Plinth beam Paise FourtySix Only

27 Providing and laying controlled cement concrete M-250 and curing complete excluding the cost of form work and reinforcement for reinforced 121.00 CMT 4,494.41 Rupees Four Thousand

concrete work in: Beam Four Hundred NinetyFour

B) Floor beam Paise FourtyOne Only

ABOVE PLINTH -ALL FLOOR

28 Providing and laying controlled cement concrete M-250 and curing complete excluding the cost of form work and reinforcement for reinforced 136.00 CMT 5,584.31 Rupees Five Thousand

concrete work in: Staircase . Five Hundred EightyFour

1) Staircase ABOVE ALL FLOOR Paise ThirtyOne Only

29 Providing and Laying Average 3 M wide 230 mm thick stone pitching with Uncoursed Rubble Masonry in c:m 1:5 including Excavation, rolling 498.00 SMT 2,791.30 Rupees Two Thousand

consolidation of earth work, watering , PCC 1:2:4, peripherical tie beam , Reinforcement ETC complete as directed by Engineer in charge Seven Hundred

NinetyOne Paise Thirty

30 Providing and laying controlled cement concrete M-250 and curing complete excluding the cost of form work and reinforcement for reinforced 287.00 CMT 4,494.41 Rupees Four Thousand

concrete work in:Slab . Four Hundred NinetyFour

1) R.C.C. slab ALL FLOOR Paise FourtyOne Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

31 Providing and laying controlled cement concrete M-200 and curing complete i excluding the cost of form work and reinforcement for reinforced 26.00 CMT 4,391.04 Rupees Four Thousand

concrete work in: Three Hundred

1) Lintel & Mullion ALL FLOOR NinetyOne Paise Four Only

32 Providing and laying controlled cement concrete M-200 and curing complete excluding the cost of form work and reinforcement for reinforced 2.00 CMT 4,391.04 Rupees Four Thousand

concrete work: Three Hundred

1) Chhajja ALL FLOOR NinetyOne Paise Four Only

33 Providing & laying formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of 450.00 SMT 174.98 Rupees One Hundred

propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete SeventyFour Paise

work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. NinetyEight Only

34 Providing & laying formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of 974.00 SMT 303.84 Rupees Three Hundred

propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete Three Paise EightyFour

work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. Only

35 Providing & laying formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of 1,874.00 SMT 197.25 Rupees One Hundred

propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete NinetySeven Paise

work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. TwentyFive Only

36 Providing & laying formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of 776.00 SMT 248.16 Rupees Two Hundred

propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete FourtyEight Paise Sixteen

work in. (M) Staircase with sloping or stepped soffits including risers and stringers excluding landing. Only

37 Providing & laying formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of 1,728.00 SMT 254.52 Rupees Two Hundred

propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete FiftyFour Paise FiftyTwo

work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness. Only

38 Providing & laying formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of 5.00 SMT 168.96 Rupees One Hundred

propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete SixtyEight Paise NinetySix

work in. (L) Chullah Hoods, weather shades Chhajjas Corbels etc. including edges. Only

39 Providing and laying TMT Bar FE 500D reinforcement for R.C.C. work and bending, binding & placing in position completed upto any floor any level 1,28,518.00 KG 76.21 Rupees SeventySix Paise

Thermo Mechanical Treated Bars as per I.S. Standard. TwentyOne Only

40 Providing and laying Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. In foundation and plinth 86.00 Cmt. 4,021.02 Rupees Four Thousand

in cement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional. Up to TwentyOne Paise Two

1) Plinth level. Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

41 Supply, installation of vintage red cladding brick 9"X3" approved by architect/PMC/EIC in all floors with given sizes (thickness to be specified by the 895.00 Smt 1,060.50 Rupees One Thousand

manufacturer), of approved brand & manufacturer, approved colours and shade, laid with cement based high polymer modified quick set tile adhesive/ Sixty Paise Fifty Only

cement /as specified by the manufactures with mentioned thickness ,including grouting/ painting of joints .The quote rate shall include all design,

engineering & shop drawing approval from architect & consultant, mock-ups, sample submission, handling of all materials (loading, unloading, shifting,

etc), scaffoldings, access equipments etc. complete as per drawings and design supplied by architect and instruction given by authority and Engineer in

42 Supply, installation of exterior breeze blocks 8"X8" approved by architect/PMC/EIC in all floors with given sizes (thickness to be specified by the 42.00 Smt 1,060.50 Rupees One Thousand

manufacturer), of approved brand & manufacturer, approved colours and shade, laid with cement based high polymer modified quick set tile adhesive/ Sixty Paise Fifty Only

cement /as specified by the manufactures with mentioned thickness ,including grouting/ painting of joints .The quote rate shall include all design,

engineering & shop drawing approval from architect & consultant, mock-ups, sample submission, handling of all materials (loading, unloading, shifting,

etc), scaffoldings, access equipments etc. complete as per drawings and design supplied by architect and instruction given by authority and Engineer in

43 Providing and laying autoclave aerated concrete blocks as per drawing in single or multiple layers with approved block laying polymer modified adhesive 353.00 Cmt. 5,918.93 Rupees Five Thousand

mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum density in oven dry condition between 651 to 750 Nine Hundred Eighteen

KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the surface with necessary Paise NinetyThree Only

tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks when tested in accordance

with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding, racking / flush jointing etc complete, as per drawing / specification etc, complete As per

drawings and design supplied by architect and instruction given by authority and E.I.C. For all civil, plumbing, electrical & infrastructure works.

a) ALL FLOOR

44 Providing and laying autoclave aerated concrete blocks as per drawing (Thickness 100 mm ) in single or multiple layers with approved block laying 5.00 Cmt. 5,918.93 Rupees Five Thousand

polymer modified adhesive mortar. Crushing strength of aerated concrete block shall not be less than 40 KG/sqcm, minimum density in oven dry Nine Hundred Eighteen

condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire resistant 4 hours, in true line level and plumb and Paise NinetyFour Only

cleaning the surface with necessary tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks and 0.10 percent for Grade

2 blocks when tested in accordance with IS : 6641 (Part-2)-1972 etc. including curing, scaffolding, racking / flush jointing etc complete, as per drawing /

specification etc, complete As per drawings and design supplied by architect and instruction given by authority and E.I.C. For all civil, plumbing, electrical

& infrastructure works.

a) ALL FLOOR

45 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plastering upto floor two level and 1,383.00 SMT 145.88 Rupees One Hundred

finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) FourtyFive Paise

1) 15 mm Thick Plaster Ground Floor EightyEight Only

46 Providing & laying10 mm. thick cement plaster in single coat on fair side of brick concrete walls & ceilings for interior plastering upto floor two level 725.00 SMT 164.97 Rupees One Hundred

and finishing with smooth mala plaster.(i) Cement mortar 1:3 (1 cement : 3 sand) SixtyFour Paise

1) 10 mm Thick Plaster Ground Floor NinetySeven Only

47 Providing 20 mm thick double coat mala cement plaster on exterior brick / concrete work for plastering comprising of base coat of 12 mm thick cement 560.00 Smt 270.43 Rupees Two Hundred

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) Seventy Paise

finished with trovel including scaffolding curing etc. complete. Rate includes for all floor all lead & lift. FourtyThree Only

48 Wall Painting (two coats) with weather proof exterior emulsion paint of approved brand and manufacture and of required shade on exterior wall 560.00 Smt 114.53 Rupees One Hundred

surface to give an even shade over and including a primery coat with alkaly resistance primer of approved brand after thoughly brushing surface to Fourteen Paise FiftyThree

remove all dirt and remains of loose powdered materials etc comp. for all height. The work shall be carried out in a workman like manner to make the Only

give a certification on stamp paper for the performance for a period of three years.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

49 Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new wall surface to give an 2,108.00 Smt 160.01 Rupees One Hundred

even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand prepared smooth. (Putty shall have Sixty Paise One Only

low-VOC (Volatile Organic Compound) and Wall painting (Three coats) with plastic emulsion paint of approved brand and manufacture on wall surfaces

to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. The

work shall be carried out in a workman like manner to make the give a certification on stamp paper for the performance for a period of three years.

50 Providing & Fixing the Chikenmesh - 20 guage (Crimp Jali) of approved size applying between the RCC and masonry junction in proper line, level and 389.00 Smt 287.71 Rupees Two Hundred

plumb with all material, labour, tools, tackles and equipment including fixing the jali with nails, etc complete as directed by the Engineer-in-charge. EightySeven Paise

SeventyOne Only

51 Providing and applying 2mm thick Texture Plaster incorporating fine filaments made of polymer and aggregating natural stone powder with making 344.00 Smt 499.95 Rupees Four Hundred

grooves on existing base coat of 20 mm thick smooth mala plaster etc. Complete Exterior weather proof two coat paint in any shade As per drawings NinetyNine Paise

and design supplied by architect and instruction given by authority and E.I.C. for all floor all height. The work shall be carried out in a workman like NinetyFive Only

manner to make the give a certification on stamp paper for the performance for a period of three years.

52 Providing and laying polished kota stone slab flooring over 20 mm.(average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 687.00 Smt 976.72 Rupees Nine Hundred

laid over and jointed with gray cement slurry including rubbing & polishing etc. complete. [A] 25 mm. thick. SeventySix Paise

SeventyTwo Only

53 Providing and laying Polished kotah stone skirting as per item above but hand polished including making zari in brick wall / RCC column and and filling 3.00 Smt 1,121.48 Rupees One Thousand

the zaris above the stone after fixing the stone with plaster and neatly finished with rich cement putty etc complete. One Hundred TwentyOne

Paise FourtyEight Only

54 Providing and laying 1st quality Full body Glazed/ Matt vitrified tiles for Floor in different sizes (size and thickness to be specified by the 171.00 Smt 2,201.75 Rupees Two Thousand

manufacturer),of any desired shade & color specified by Architect, laid with cement paste on and including cement mortar 1:4 bedding laid to proper Two Hundred One Paise

slope or as required on site, line and level, as specified. All joints filled with epoxy grout (avg. 4*10 to12 mm) and protection with minimum 10mm thick SeventyFive Only

POP Laying over PVC bubble Sheet/Floor protector approved by EIC and later removing and maintaining it till handing over, including cutting of

tiles,curing and cleaning complete all as per detailed drawings and specifications as directed by EIC for all lift,all floor levels and leads. The item to

include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects etc. complete as direction by E.I.C.complete for light shade

55 Providing and laying 1st quality Full body Glazed/ Matt vitrified tiles for Floor in in different sizes (size and thickness to be specified by the 43.00 Smt 2,201.75 Rupees Two Thousand

manufacturer),of any desired shade & color specified by Architect, laid with cement paste on and including cement mortar 1:4 bedding laid to proper Two Hundred One Paise

slope or as required on site, line and level, as specified. All joints filled with epoxy grout (avg. 4*10 to12 mm) and protection with minimum 10mm thick SeventyFive Only

POP Laying over PVC bubble Sheet/Floor protector approved by EIC and later removing and maintaining it till handing over, including cutting of

tiles,curing and cleaning complete all as per detailed drawings and specifications as directed by EIC for all lift,all floor levels and leads. The item to

include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects etc. complete as direction by E.I.C.complete for Dark shade

56 P & L 24" x 24" or 12" X 12" vitrified 8-10 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new 250.00 Smt 1,397.83 Rupees One Thousand

surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and including grouting the joints filled with epoxy Three Hundred

grout (avg. 4*10 to12 mm). including finised with flush pointing & cleaning the surface etc. for antiskit NinetySeven Paise

EightyThree Only

57 P & L vitrified 8-10 mm thick tiles skirting/Dedo with construction adhesive including grouting the joints filled with epoxy grout (avg. 4*10 to12 681.00 Smt. 1,054.76 Rupees One Thousand

mm).Rate includes for all lead & lift etc, complete as per drawings and design supplied by architect and instruction given by authority and E.I.C. for dark FiftyFour Paise SeventySix

shade/ light shade. Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

58 Providing and laying double charged Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in Skirting, treads of steps and landing laid on a bed of 12mm thick 21.00 Smt. 1,073.13 Rupees One Thousand

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. SeventyThree Paise

Thirteen Only

59 Providing and laying Granite stone slab flooring over 20 mm. (average thick base of cement mortar 1:6 (1 cement : 6 coarse sand ) and laid over and 25.00 Smt. 2,804.77 Rupees Two Thousand

jointed with grey cement slurry including rubbing and polishing complete. 18 mm Thick. Eight Hundred Four Paise

SeventySeven Only

60 Providing and laying polished granite stone slab 18 mm thick in risers, Tread of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement : 5.00 Smt. 2,340.17 Rupees Two Thousand

3 coarse sand) and jointed with gray cement slurry including rubbing & polishing etc. complete. Three Hundred Fourty

Paise Seventeen Only

61 Providing and fixing Sand which type Granite platform including supplying and fixing granite stone 18 mm thick mirror polished 1st quality Granite 8.00 Smt. 6,780.13 Rupees Six Thousand

stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone platform fixing in top and sides and itermediates Seven Hundred Eighty

supports fixing with cement mortar and adhesivee and finishing including cutting for fixing of sink any size (as directed by engineer incharge) at Paise Thirteen Only

required position etc complete.

62 Supplying and installation of Synthetic Hockey Field by a FIH Certified Field Builder using FIH Global Category synthetic turf from FIH Preferred Supplier 6,591.00 Smt. 6,768.79 Rupees Six Thousand

and with minimum 15 mm cast in-situ shockpad on prepared bituminous surface maintaining International Hockey Federation (FIH)specifications.The Seven Hundred SixtyEight

FIH approved Synthetic Hockey Turf should be UV protected.The scope includes testing and certification conforming to FIH Category-II. Colour of the Paise SeventyNine Only

turf:Blue.Hockey Synthetic turf–Water based. make should be as per approved make.

63 Supplying and fixing of aluminium Hockey Goal Post - 100% Aluminium weighted Olympic grade with Movable wheels. Freestanding goals with integral 1.00 PAIR 4,35,562.50 Rupees Four Lakh

weights ensure the goal does not tilt. Goals may either be fitted with “impact resistant” aluminium back and side-boards with cushion, or noise-reducing ThirtyFive Thousand Five

materials that may be less resistant to damage from repeated ball impacts. A goal comprises two vertical goalposts joined by a horizontal crossbar, two Hundred SixtyTwo Paise

sideboards, and a backboard. Fifty Only

Goal posts and crossbar:

a. The goal-posts and cross-bar should be white rectangular in cross-section 75 mm x 50 mm

b. the goal-posts must not extend vertically beyond the cross-bar and the cross-bar must not extend horizontally beyond the goal-posts

c. the distance between the inner edges of the goalposts shall be 3.66 (± 0.01) metres and the distance from the lower edge of the cross-bar to the

ground shall be 2.14 (± 0.01) metres Approved by FIH.

Nets:blue net mesh size is 45 mm attachment to the back of the goal-posts and crossbaris at intervals of not more than 150 mm

64 Supply and installation of fully computerzied automatic and single key operation Popup sprinkler system specifically designed for synthetic sports 1.00 Job 36,00,650.00 Rupees ThirtySix Lakh Six

hockey surface of approved quality and make incl. all fittings and accessories incl. earth work in excavation and re-filling HDPE pipe dia 150/110mm class Hundred Fifty Only

per 100 grade 12.5g/cm2 incl. carriage of materials all complete with 50HP pump

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

65 Providing and laying water proofing treatment on terrace including applying neat cement slurry 2.75 Kg./ Sqmt. On cement admixed with water proofing 384.00 Smt. 633.27 Rupees Six Hundred

component after cleaning the surface, laying cement concrete with brick bat 75 mm to 100 mm thick with 50% of C.M. 1:5 admixed with water proofing ThirtyThree Paise

component over 20 mm thick layer of C.M. 1:5 to required slope including ramming at junction of wall and slab, after two days of proper curing applying TwentySeven Only

a second coat of cement slurry, finished the surface with 20 mm thick C.M. 1:4 china mosaic flooring and finally finished surface with white cement

slurry, after finishing with terrace shall be finished with water for a period of two week.

66 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement 313.00 Smt. 513.91 Rupees Five Hundred

compound consisting of applying : Thirteen Paise NinetyOne

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure Only

for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be

allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints,

corners, junctions of pipes and masonry with polymer mixed slurry.

67 Providing & laying broken china mosaic flooring on top of integral waterproofing using small broken chips of white/colour glazed tiles set in crazy 384.00 Smt 747.29 Rupees Seven Hundred

pattern, as desired by Architect, in cement mortar laid to required slopes and simultaneously filling in remaining top joints in the waterproofing layer FourtySeven Paise

and tamped with wooden block to get smooth even surface to required slope, filling the joints with cement grout , cleaning the surface on completion TwentyNine Only

and curing etc. complete. The work sall be carried out in a workman like manner to make the give a guarantee on stamp paper for the performance for a

period of ten years.The work shall be measured in square meter of the actual area laid and no extra shall be paid for vatahs, rounding at junction of wall

and floor and around water spouts, water outlets etc.

68 Providing and laying plinth protection to existing building including excavation in oridnary soil and providing Cement Cocrete 1:2:4 (0.10 mt thk)(1 136.80 Smt. 1,087.77 Rupees One Thousand

Cement : 2 Coarse Sand : 4 Stone Aggregrate 20 mm nominal size) coping on top of Brick Masaonry in 1:6 including ramming finishing (wiht Square EightySeven Paise

line(0.20 X 0.20) marking on Top and Side )and curing etc complete SeventySeven Only

69 Providing and fixing 35 mm thick flush door shutter flat pressed wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 12.00 Smt 6,825.58 Rupees Six Thousand

grade I type II including both sides 1 mm thick Decorative laminated and 6 mm thick I.T.W. beading all around by using 120 m.m. x 80m.m.. solid core Eight Hundred

malemine faced three layered I.T.W. frame with necessary groove cutting and decorative type designer Heavy Guage fixtures, fastenings 2 Nos. Satin TwentyFive Paise

finish or Glossy Handle , Mortise lock, 1 Nos. towerbolt,1 No. SS door closer, 6 No.SS hinges approved by Enineer in-charge and architect etc. including FiftyEight Only

I.T.W. triangular batten patti of size 30m.m.x 30m.m.etc. as per architectural drawing and as directed by engineer in charge..

70 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat 68.00 Rmt 1,259.98 Rupees One Thousand

comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and Two Hundred FiftyNine

non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full Paise NinetyEight Only

body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),

minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and

length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile

dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 60X125MM Frame

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

71 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin 30.00 Smt 4,601.61 Rupees Four Thousand Six

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives Hundred One Paise

(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), SixtyOne Only

minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,

water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

72 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System 26.50 Smt 7,288.34 Rupees Seven Thousand

held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with Two Hundred EightyEight

SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Paise ThirtyFour Only

Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener &

anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to

perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements

etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather

sealant, so as to make the entire system fully water proof & dust proof. The rate shall include double shutter glass door with all fxures as per the

drawing, all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges

including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener,anchors, SS channel laminated glass etc. all

complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel

shall be measured.

73 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame 21.00 Smt 9,352.39 Rupees Nine Thousand

with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming Three Hundred FiftyTwo

process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded Paise ThirtyNine Only

interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing

capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, mosquiote net Jali etc. Profile

of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted

but no extra payment on this account shall be made.

Three track three panels sliding window made of (big series) thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate

dimension. (Area of window above 1.75 sqm)

74 Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where 3.00 Smt 6,420.34 Rupees Six Thousand Four

ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required Hundred Twenty Paise

length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for ThirtyFour Only

fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded

at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted

but no extra payment on this account shall be made.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

75 Providing, supplying, fabricating and erecting in position the structural steel for colums, grill, gates, bars, truss, purlins, runners, cleats, insert plate, base 23,393.00 Kg. 127.95 Rupees One Hundred

plate etc for all structural elements as per detail, made up from closed structural steel hollow sections (RHS/SHS including rolled section ) or angle or TwentySeven Paise

chanel with weather resistant, sections made from high tensile steel plate of Tata Structural / sections or an approved equivalent as per details / NinetyFive Only

drawings/instructions including cutting, bending, jointing, connecting, welding and / bolting and / riveting and fabricating and erecting in position etc

complete for all levels as directed. The rate to include all necessary fixtures, fastening including welding rods of standard approvded quality etc for

complete the job. The rate shall also include the two coats of synthetic enamel paint with priming coat & necessary scaffolding etc. complete as directed

76 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and 2,845.00 kg 643.30 Rupees Six Hundred

making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary FourtyThree Paise Thirty

accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable Only

arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

77 Fixed Stadium Seating system: Providing and fixing double-wall hollow blow mold bucket type seat having minimum dimensions as 465 mm side length 500.00 Each 2,645.19 Rupees Two Thousand Six

x 420 mm front width x 400 mm rear height in one piece of HDPE having minimum shell thickness of 3 mm on each wall and minimum density of 0.95 Hundred FourtyFive Paise

gram/cm3, weight of plastic chair should not be less than 2.2 kg, chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer Nineteen Only

and color fastness, having ergonomic design, with two digit aluminum number plate for seat to be fixed on aluminum floor mount frame by the process

of grouting with bolt. The chair should be fixed with Metal Inserts moulded inside seat to connect seat with Galvanized pipes 25 Nominal Bore and 2mm

thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are

to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant colour fading and 5 year

against breakage due to manufacturing. Chair Plastic Part should have been tested with xenon –Arc exposure Test as per ISO 4892-2:2013 ,Cycle-1. The

Grey Sale Rating should be (GSR) : > 4, Delta Δ E : < 3 Valid Test Certificate to be submitted The seat should pass BSEN 12520 ;2015 TEST

78 Providing and fixing Toilet cubicals as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required 21.00 Each 34,302.63 Rupees ThirtyFour

colour ,shade and sizes as manufactured by Besco by Merino (Titan std) or Greenlam Sturdo Classique Grandeur or Solace ( SS series) by SPCMS or T Thousand Three Hundred

Line or approved equivalent including stainless steel accessories ( SS-304 grade) like square top rail, legs, knob, thumb turn and indicator, twin coat Two Paise SixtyThree Only

hook, door stopper, adjustable legs, gravity hinges, and locking arrangement, SS chanel etc as desired. all complete as per drg and direction of Engineer

in charge. (Cubical size =(1050x1500)mm, Cubical Height =2100mm,External Laminate finish = Mettallic)

79 Construction Septic tank inside dimention of 6 m in length & 3 m in width & 3 m depth including excavating any type of soil as shown and mentioned in 1.00 Nos. 1,28,406.13 Rupees One Lakh

the drawing,providing and laying 0.10 m thick plain cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone agg.) 40 mm thick IPS flooring at TwentyEight Thousand

bottom with brick masonary 0.23 m thick walls CM 1:5 ( 1 cement : 5 coarse sand ) and intermediate partition CM 1:4 & RCC Top slabs12 cms thick in Four Hundred Six Paise

1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg) including reinforcement as per design and 15 mm thick cement plaster in CM 1:4 with floating Thirteen Only

coat of neat cement slurry inside, top and around tank below 15 cm on ground level, Also provide Two nos CI Manhole frame and cover of size 60 cm x

45 cm & 75 mm dia. PVC 6 kgf / Sq cm pressure air vent pipe in 3.00 length with cowl etc complete as per direction of Engineer in charge.

80 Providing and constructing SOAK WELL of 2.50m internal dia and 5.00 depth depth internal clear dimention including the cost of execavation,PCC 1:4:8 1.00 Nos. 87,112.50 Rupees EightySeven

foundation for honey combed masonary in C.M. 1:4 (1cement : 4 sand) , casting R.C.C. 1:2:4 (1cement : 2 sand : 4 graded stone aggregate 20mm Thousand One Hundred

nominal size) top slab 12 thick with C.I. manhole cover 600mm x 450mm size of 35 kg. weight and 75mm dia C.I. pipe 1800mm long with 75mm dia Twelve Paise Fifty Only

cowel vent and filling the wall 1000mm in depth with dry brick bats including providing vata in C.M. 1:3 (1cement : 3 sand), curing including cost of

reinforcement etc. complete as per detailed drawing and directed by E.I.C.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

81 Providing and fixing bright finish 2 mm thick Stainless steel (Grade 304) 3D letters box size up to 900 cm height in English language with Acrylic cut work 1.00 SQM' 50,500.00 Rupees Fifty Thousand

and fixing 3mm acrylic on top of brand Ptglass,astari etc,with all laser and cnc work,including LED lighting illumination, all material, labour and other Five Hundred Only

hardwares, waste of materials etc fixed in wall at any height including scaffolding etc complete As per drawings and design supplied by architect and

instruction given by authority and E.I.C.

82 Providing and fixing Sport Murals as per drawing,made of 4mm ACP mounted on Galvanium Sheet/Wall , Aluminium Composite Panel (ACP) shall be 2.00 SQM 8,585.00 Rupees Eight Thousand

4mm thick in required colors for exteriors consisting of two layers of aluminium skins of 0.50mm thick sandwiching a thermo plastic core in continuous Five Hundred EightyFive

lamination process with PVDF coating for exterior grades ensuring long colour and no fungal attacks. Base Frame Work With aluminium sections of Only

65mm X 25mm shall be fixed over the brick work and the above aluminium panels shall be fixed to the frame work as cladding with material - silicone

dow corring 789 weather silicone in 995 dow corring, It includes cost of labour all CNC CUT WORK, materials all accessories, adhesives,saffoldinf,

wastages, transport, taxes, fixing into a neat finish in aesthetic point of view, without any undulations in facias all complete as per drawing and

Instruction of engineer in-charge.

83 Cement Concrete Pavement: Providing and Laying of un-reinforced, dowel jointed, M300 pavement cement concrete pavement over a prepared sub 173.00 cmt 6,132.72 Rupees Six Thousand One

base with 53 grade cement with coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a Hundred ThirtyTwo Paise

batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a SeventyTwo Only

continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant

primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing Compound, finishing to lines.

the grass forms a thick lawn, free from weeds and fit for mowing including supplying farm clay up 300 mm thick, sludge, manure,pesticides , extra earth, EightyOne Paise Eighty

disposal of rubbish, trench excavation and all labour with lead and lift etc. complete as directed by EIC. Only

85 Filling with good quality garden soil obtained from outside, including watering, ramming well, consolidating, compacting and dressing etc. complete, as 86.00 Cmt 241.39 Rupees Two Hundred

directed. Dressing and leveling the area by spreading 3" of good quality soil & manual compaction as required and as approved by EIC. Area to be FourtyOne Paise

dressed very finely and neatly using FYM, soil, insectiside mixture as directed to the perfect slope and level desired.(Minimum of 90% accuracy required). ThirtyNine Only

86 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed 4.00 Smt 3,503.41 Rupees Three Thousand

together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside Five Hundred Three Paise

locking with push-pull operation including the cost of hood cover and spring etc. complete. (A) Shutters having width below 3.5 M. FourtyOne Only

87 Providing and fixing 27.5 cm. long wire spring grade No.2 of approved make for rolling shutters. 1.00 Each 637.22 Rupees Six Hundred

ThirtySeven Paise

TwentyTwo Only

88 Providing and fixing Hood cover for rolling shutters (A) Shutters having width below 3.5 meters 1.00 Rmt 121.23 Rupees One Hundred

TwentyOne Paise

TwentyThree Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

89 Providing and fixing PUF Insulated continuous sandwich panels for roofs of total thickness not less than 30mm made out from continue line method. 414.00 Sqm 3,117.79 Rupees Three Thousand

Panel shall have 0.5 mm thick precoated GI sheet on bothside of Polyurethane foam with external face being corrugated in shape for GI and PU foam One Hundred Seventeen

both material. The crest height of the panel shall be of 35mm minimum with 250mm c/c pitch. The Precoated sheet shall be of minimum 240 mpa steel Paise SeventyNine Only

grade confirming to IS14246:1995 and shall have zinc coating of 120 gsm as perIS:277,5-7 microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron. The PPGI Sheet shall have protective guard film of minimum 25 microns to avoid scratches wihile trasportation. The roof panels

are laid over aframe work of trusses, columns and purlins fixed using 90 mm self-drilling bolt with rubber washer including all types of flashings. PU

Foam must be self-extinguishing, fire retardant type having minimum density of 40Kg/Cu.mt. (+,-2Kgs) including 0.25 mm craft paper edging, self-

tapping screws of required length and nos. etc complete as per structural design and direction of Engineer-in-charge.

90 Providing and fixing PUF Insulated continueous sandwich panels for walls of total thickness not less than 50 mm and width 1.0 m made out from 33.00 Sqm 3,118.04 Rupees Three Thousand

continue line method on automatic plant.Panel shall have 0.5 mm thick pre coated GI sheet on both side of Polyurethane Foam confirming to IS One Hundred Eighteen

12436:1988.The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 Paise Four Only

gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron.The PPGI Sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during trasportation.The panels shall be vertically joined together by tongue and

groove joints. The PU Foam shall be selfextinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including 0.25 mm thick

craft paper edging on both edges. The panels shall be fixed to the steel frame structure with minimum 5mm thick self tapping GI screws of required

length and nos. with minimum spacing of 300 mm c/c. etc complete as per structural design and direction of Engineer-in-charge.

91 Providing and Fixing Flashing, Capping and Gutters manufactured out of thick pre coated GI sheet in standard length of 2.5 Mtr. and fixed by means 47.00 Rmt 496.10 Rupees Four Hundred

ofhex-head self-drilling stitching screws. as per drawings supplied by architect & as directed by Engineer-in-charge. NinetySix Paise Ten Only

92 Providing and fixing of Bottom and top U track for closing of end joints for cut PUF panels of size of 52mm x 30mm with 5mm lipping on Both edges. The 109.00 Rmt 582.95 Rupees Five Hundred

U track shall be made out of 1 mm thick pre coated GI sheet.The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 EightyTwo Paise

and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 NinetyFive Only

micron. The PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The U track shall be

fixed with suitable POP rivet with wall roof panels and plinth with Expandable fastners with minimum spacing of 450 mm c/c. The Utrack shall be fixed

etc. complete as directed by Engineer-in-charge.

93 Supplying, fabricating, manufacturing and fixing in position paneling at roof level made from Glass fibre reinforced concrete (GRC) , Quartz Sand, AR 23.00 Sqm 8,080.00 Rupees Eight Thousand

Fibres, Water Plasticizers & pigments, in shape, size and length as per the design and drawings and as per specifications, mix design and test results Eighty Only

given below. The typical panel should be of sizes as per the drawings. Their minimum thickness of panel to be : upto 50mm GRC pads acting as

stiffeners, minimum Weight a 4.5kgs/sq.ft and of approved Colour & texture (to match existing building finish in sand face plaster).Followed by fixing of

GRC panels on primary structure by dry cladding method with help of S.S. Screws Fixtures, M.S Angle Cleats, Fissure Plug, and Dowel Pin proper

alignment as per Drawings (drawings to be submitted by the contractor before the work start) Finishing with GRC powder & filling the joints with Epoxy

sealant neatly between GRC Panels and primary structures. The paneling should be in absolute straight plumb line and length and joins between

channels should be neatly filed to make seamless uniform surface across the entire elevation of the building without any visibility to joints etc. complete

as per drawings and design supplied by architect and instruction given by authority and Engineer in Charge. The rate include scaffolding, lab test etc.

1. MIX DESIGN- white Cement 50 + 5 %. Fine Quartz Silica sand :- 50 + 5%. 3. Alkali Resistant (AR) Glass Fiber – 2 to 5%. Percentage varies depending

upon the type of Component of GRC and method choosen for manufacture i.e. is spray or vibration casting or both, 4. Polimer:- 0.5% Approx,

Plasticizer :- 0.5% approx, 6. Pigments and other Addities:- Aa per requirements. 2 SPECIFIATION & TEST RESULTS- 1. Dry Density:-1.8 to 2.2 t/cum.2.

Compressive strength.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

94 Supply of M.S Powder coated Locker with one shelf and road the cabinet of 12 Locker cabinet in one unit in staple arrangement of size 650mm(H) X 60.00 No 18,403.21 Rupees Eighteen

1050mm(L) X 450mm(D) the inner size of cabinet is 600(H) X 350mm(L) X 450mm(D) with inbuilt Locking system Body 22 Gauge and Door 20 Gauge Thousand Four Hundred

however the size will differ of the execution will be as per Engineer in charge. Three Paise TwentyOne

95 Constructing Under Ground water tank includes Providing and laying controlled cement concrete M250 mix for R.C.C. work including reinforcement, 1,00,000.00 Lit. 16.83 Rupees Sixteen Paise

boxing, centering, vibrating, curing and mixed with approved water proofing cement compound or "CEMWET" or "PIDICRETE LW" integral water EightyFour Only

proofing admixture as water proofing agent to be mixed with 50 kgs. bags shall be as recommended by the manufacture of the water proofing material,

concrete work for top, bottom slab, beam & side pardi for under ground water tank item incl. Necessary excavation & refilling the murrum, 15 cm thk

1:2:4 for bedding of concrete, 20 mm thk. water proofing cement plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo, vata, watering etc. Comp.

to all face of tank . including locking arrengement outlet, inlet, overflow and washout outlet pipe, PVC water stopper arrengement as necessary & C.I.

Cover 0.60 x 0.45 weight not less then 35 kg with locking arrengment. etc. comp as per structural drawing Including Steel & as directed by Eng-in-charge.

96 SANITARY FIXTURE & FITTINGS 19.00 Nos. 26,453.92 Rupees TwentySix

Providing and fixing wash down water closet (European type, W.C. Pan_white glazed vitreous china Coupled closet (European pattern) 'S' type of Thousand Four Hundred

approved make as per IS-2556 with ISI mark) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine FiftyThree Paise

sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour. Couple closet Model No Jaquar VGS-WHT- NinetyTwo Only

81751S) equivalent Model roca/Hindware/cera

VGS-WHT-81753S250UFSMZ, Coupled WC - Vignette, Code : VGS-WHT-81753P180UFSMZ, Description : Rimless Bowl with cistern for, Coupled WC with

UF soft close slim seat cover, Hinges, Fixing Accessories, vario bend and Accessories Set, Size: 380 x 610 x 805 mm, S trap-250mm

97 Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. 19.00 Nos. 291.33 Rupees Two Hundred

NinetyOne Paise

ThirtyThree Only

98 Providing and fixing C.P jet spray / health faucet with required length of flexible tube, clamp and bracket for fixing to wall as per required. Hand shower 19.00 Nos. 2,194.73 Rupees Two Thousand

(Health Faucet),flexble tube&wall Bracket(Model No-ALD -565) One Hundred NinetyFour

Paise SeventyThree Only

99 Providing and fixing washbasin with single hole for pillar tap with White glazed vitreous china Under counter wash hand basin Make:Jaquar (Model no- 18.00 Nos. 12,847.20 Rupees Twelve Thousand

FNS-WHT-40701) including sutting holes and making good the same but excluding fittings. Eight Hundred

Under counter Basin with Fixing Accessories, Size: 605 x410 x 200mm FNS-WHT-40701) FourtySeven Paise Twenty

100 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden 16.00 Nos. 833.73 Rupees Eight Hundred

pluge with C.P. brass screws and washers. ThirtyThree Paise

SeventyThree Only

101 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. . Make Jaquar C.P.Pillar Cock (Model no-FLR- 18.00 Nos. 2,250.28 Rupees Two Thousand

5011KN) Two Hundred Fifty Paise

TwentyEight Only

102 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 6.00 Nos. 80.14 Rupees Eighty Paise

Fourteen Only

103 Wall mixure With Overhead wall shower 6.00 Nos. 10,413.10 Rupees Ten Thousand

Providing, fixing and testing and commissioning of diverter with spout with bend pipe for overhead shower etc. as per drawings / details. equivalent to Four Hundred Thirteen

make Jaquar:- Shower head Multi flow (Model No-OHS-1799),Shower Arm (Model No-SHA-483) ,Shower wall mixure (Model No-CON-217KN) Paise Ten Only

104 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(Make- Jaquar :- Towel Rack with 6.00 Nos. 5,562.07 Rupees Five Thousand

Lower Hanger (Stainless Steel) with hook Five Hundred SixtyTwo

Paise Seven Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

105 Providing and fixing in position 15 mm dia CP brass Bib Cock with cover flange plate including CP brass extension nipple wherever required and all 8.00 Nos. 2,710.84 Rupees Two Thousand

necessary fittings etc complete. Make Jaquar:- CP Bib cock (short body)with wall flange(Model No-FUS-29037) Seven Hundred Ten Paise

EightyFour Only

106 Providing and fixing es of white glazed vitreous china flat back, lipped front urinal basin of approved quality including connection with trap and with 12.00 Nos. 26,495.33 Rupees TwentySix

integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. Thousand Four Hundred

URINAL WITHOUT SENSOR WITH FIXING ACCESSORIES SET, SIZE:485X310X710 mm Cat: URS-WHT-13255 SENSOTRONIC SENSOR FLUSHING VALVE FOR NinetyFive Paise

URINAL ThirtyThree Only

WITH COMPLETE KIT (SUITABLE FOR URINAL URS-WHT- 13255) (Cat: OPS-WHT-15801 SNR-CHR- 51097)

107 Providing and fixing Rubber plug for sink or wash basin. 6.00 Nos. 17.15 Rupees Seventeen Paise

Fifteen Only

108 Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin. Make: Jagura 32mm CP bottle 18.00 Nos. 3,232.00 Rupees Three Thousand

trap(Model No-ALD769L250X190) Two Hundred ThirtyTwo

109 Providing and fixing C.P Brass angle valve 15 mm complate as per required. (Make: CP Angle stop cock with wall flange (Model no-FUS-29053) 37.00 Nos. 2,027.07 Rupees Two Thousand

TwentySeven Paise Seven

110 Providing and fixing 450mm Long Braided Hose pipe with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Wash Basin, Kitchen Sink 37.00 Nos. 437.33 Rupees Four Hundred

etc.) of approved make and conforming to Manufacturers Standards. ThirtySeven Paise

ThirtyThree Only

111 Supply, storing, installation and testing towel ring, with concealed type brackets fixed, to the wall, with CP brass screws, etc. complete. (Make: Hind 6.00 Nos. 1,850.32 Rupees One Thousand

ware/cera/jaguar/Grohe) CP square Towel Ring(Model no-CAN-1121BN) Eight Hundred Fifty Paise

ThirtyTwo Only

112 Providing and fixing of grab bars 300 mm Stainless steel in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted 4.00 Nos. 2,833.05 Rupees Two Thousand

in all manners and satisfied to of EIC.(Make: Hind ware/cera/jaguar/Grohe) Eight Hundred

ThirtyThree Paise Five

113 Providing and fixing of grab bars Vertical Swing 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside 1.00 Nos. 23,394.63 Rupees TwentyThree

diameter wall mounted in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to Thousand Three Hundred

of EIC.(Make: Hind ware/cera/jaguar/Grohe) NinetyFour Paise

SixtyThree Only

114 Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of 2.00 Nos. 39,291.48 Rupees ThirtyNine

the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, Thousand Two Hundred

water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be NinetyOne Paise

made from Stainless Steel. FourtyEight Only

115 Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, pre filter housing with 'O' ring pre 2.00 Nos. 14,039.00 Rupees Fourteen

sediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high Thousand ThirtyNine Only

pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B]

Ltr / Hr with 30 Ltr. S.S. Pressure Tank

116 Providing & fixing CP Soap dish(Model no-ACN 1131N) etc. complete 6.00 Nos. 1,140.29 Rupees One Thousand

One Hundred Fourty Paise

TwentyNine Only

117 Providing and fixing in position in CP brass Toilet paper holder with flap of approved makes & shapes with necessary holes and grooves work and making 6.00 Nos. 1,754.37 Rupees One Thousand

it well finished etc. complete. equivalent to make. CP Toilet Paper Holder (Model no-CAN-1153S) Seven Hundred FiftyFour

Paise ThirtySeven Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

118 Providing and fixing in position in CP Double Coat Hook of approved makes & shapes with necessary holes and grooves work and making it well finished 6.00 Nos. 909.00 Rupees Nine Hundred

etc. complete. equivalent to make. CP Double Coat Hook (Model no-ACN1161N) Nine Only

119 Providing and fixing in position in OPTIMA HAND DRYER of approved makes & shapes with necessary holes and grooves work and making it well finished 5.00 Nos. 24,881.35 Rupees TwentyFour

etc. complete. equivalent to make. OPTIMA HAND DRYER, SATIN HDR-(Cat: SAP-M99ACS Thousand Eight Hundred

EightyOne Paise

ThirtyFive Only

120 Providing and fixing in position in PAPER TOWEL DISPENSER, TOWELS WITH C/Z FOLDS of approved makes & shapes with necessary holes and grooves 5.00 Nos. 9,449.56 Rupees Nine Thousand

work and making it well finished etc. complete. equivalent to make. PAPER TOWEL DISPENSER, TOWELS WITH C/Z FOLDS, SATIN PTD-SAP-(Cat: Four Hundred FourtyNine

DT0106CS) Paise FiftySix Only

121 WATER SUPPLY 105.82 Rmt. 205.00 Rupees Two Hundred Five

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable Only

water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

122 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 220.00 Rmt. 249.72 Rupees Two Hundred

water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm FourtyNine Paise

SeventyTwo Only

123 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 38.78 Rmt. 333.66 Rupees Three Hundred

water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm. ThirtyThree Paise SixtySix

124 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 16.50 Rmt. 442.04 Rupees Four Hundred

water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. FourtyTwo Paise Four Only

125 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 15.00 Rmt. 653.77 Rupees Six Hundred

water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm. FiftyThree Paise

SeventySeven Only

126 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings make Asirvad/ prince/ supreme / 65.00 Rmt. 464.60 Rupees Four Hundred

astral / finolex or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall SixtyFour Paise Sixty Only

be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

127 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings make Asirvad/ prince/ supreme / 125.00 Rmt. 464.60 Rupees Four Hundred

astral / finolex or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall SixtyFour Paise Sixty Only

be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

128 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings make Asirvad/ prince/ supreme / 225.00 Rmt. 705.99 Rupees Seven Hundred

astral / finolex or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall Five Paise NinetyNine Only

be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

129 Providing laying and jointing in true line and level 65mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings make Asirvad/ prince/ supreme / 175.00 Rmt. 829.21 Rupees Eight Hundred

astral / finolex or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter C/C or shall TwentyNine Paise

be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of TwentyOne Only

all materials.

130 Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve 25mm dia single/double piece designed of approved make, including 2.00 Nos. 1,274.62 Rupees One Thousand

flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal Two Hundred

bore (NB) size: (Make:ZOLOTO/VTC/SANT) SeventyFour Paise

SixtyTwo Only

131 Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve 32 mm dia single/double piece designed of approved make, including 5.00 Nos. 2,017.98 Rupees Two Thousand

flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal Seventeen Paise

bore (NB) size: (Make:ZOLOTO/VTC/SANT) NinetyEight Only

132 Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve 40 mm dia single/double piece designed of approved make, including 6.00 Nos. 2,788.61 Rupees Two Thousand

flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal Seven Hundred

bore (NB) size: (Make:ZOLOTO/VTC/SANT) EightyEight Paise

SixtyOne Only

133 Providing, fixing, jointing and testing, heavy quality butterfly valve with rubber gasket, flanges / unions, nuts, bolts, washers, etc. complete, as approved 4.00 Nos. 3,652.16 Rupees Three Thousand

by the Architect and Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 50 mm (Make:ZOLOTO/VTC/SANT) Six Hundred FiftyTwo

Paise Sixteen Only

134 Supplying, installing, testing and commissioning of 50 mm diameter C.I. Non-return valves as per IS:5312 (PN 16) swing check type with required flanges, 2.00 Nos. 5,645.90 Rupees Five Thousand Six

nuts, bolts and gaskets etc. complete. Hundred FourtyFive Paise

Ninety Only

135 Providing and fixing, 20 mm. dia. UPVC hydrant, for gardening, at required distance, with 20 mm. dia. ball valve of approved make, as recommended or 25.00 Nos. 1,478.64 Rupees One Thousand

equivalent and UPVC(SCH-80) pipe piece to provide the hydrant, up to main line connection, with angle & bsae plate support having size 40 X 40 X 6 mm Four Hundred

support and 100 X 100 mm base plate, including excavation and PCC for bsae plate and all supporting fittings, making connections with main lines, SeventyEight Paise

specials, if required etc. complete with note board "NO DRINKING WATER", as directed.(Make:ZOLOTO/VTC/SANT) SixtyFour Only

136 Providing and fixing in position of approved quality G.M. float valve with copper ball float and brass rods of required length suitable for test 1.00 Nos. 4,198.57 Rupees Four Thousand

pressure of 5Kg/sq.cm of the following sizes: [A] 32 mm One Hundred NinetyEight

Paise FiftySeven Only

137 Providing and fixing 20mm diameter Brass Air release valve, double acting, screwe end of approved make complete as per engineer in charge. 5.00 Nos. 1,435.21 Rupees One Thousand

Four Hundred ThirtyFive

Paise TwentyOne Only

138 Providing, fixing testing and commissioning 25 mm diameter gun metal Y type suction strainer with screwed end screen having 1 mm dia perforation in 4.00 Nos. 1,898.80 Rupees One Thousand

SS 304 complate as per EIC. Eight Hundred

NinetyEight Paise Eighty

139 10.00 Nos. 11,711.96 Rupees Eleven Thousand

Constructing brick masonry chamber for underground Valve chamber and bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M. Seven Hundred Eleven

1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Paise NinetySix Only

Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 600mm x 600 mm and 600mm deep for pipe line with one or two inlets. (more than 10 ton)

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

140 Providing erecting and fixing double coated SIntex or equivalent PVC. (ISI) water tank of required capacity each with all necessary fittings and connection 15,000.00 Liter 3.95 Rupees Three Paise

etc. complete on terrace. (Make: Sintex / Kaka ) NinetyFive Only

141 Providing, laying and jointing in true line and level 50mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end 85.14 Rmt. 401.98 Rupees Four Hundred

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each One Paise NinetyEight

other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes Only

and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

142 Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end 49.50 Rmt. 644.38 Rupees Six Hundred

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each FourtyFour Paise

other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes ThirtyEight Only

and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

143 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end 259.60 Rmt. 1,051.12 Rupees One Thousand

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other FiftyOne Paise Twelve

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm Only

center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

144 Providing, fixing and testing PVC Deep seal P-Trap of 110 X 110 mm dia diameter, with necessary distance piece of 75mm dia pipe and 150 x 150mm 33.00 Nos. 696.90 Rupees Six Hundred

heavy duty PVC three piece grating, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / NinetySix Paise Ninety

astral / finolex) Only

145 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I 12.00 Nos. 684.02 Rupees Six Hundred

scread down or hinged grating including the cost of cutting and making good the walls. EightyFour Paise Two Only

146 Providing and fixing, PVC cowl, 75 mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified 2.00 Nos. 110.09 Rupees One Hundred Ten

and required, etc. complete. Paise Nine Only

147 Providing and fixing, PVC cowl, 110 mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified 10.00 Nos. 140.39 Rupees One Hundred

and required, etc. complete. Fourty Paise ThirtyNine

148 Providing & Fixing 100mm diameter screwed PVC Cleanout Plug with suitable inset keys and opening male threaded joint with PVC coupling caulked to 10.00 Nos. 236.34 Rupees Two Hundred

pipe and fittings, etc. complete as per direction of Engineer in charge. ThirtySix Paise ThirtyFour

149 Providing and fixing rain water "KHURRAS" size 300 x 300 mm required depth with lead flashing around rainwater pipe with one piece lead sheet of 3 10.00 Nos. 1,217.05 Rupees One Thousand

mm thick set on a layer of cold bitumen. Including heavy duty CI grating complete as required. Two Hundred Seventeen

Paise Five Only

150 Supplying of factory made precast U shape storm water drain of size 300 mm x 300 mm x 2000 mm long, T-6 load carrying capacity – 4.8 T Axle Load – 25.00 Rmt. 3,657.74 Rupees Three Thousand

2.4 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe500D shall be Six Hundred FiftySeven

use for reinforcement. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each storm water drain Paise SeventyFour Only

for jointing two precast storm water drain using cement mortar or suitable non shrink grout. The precast utility duct must consist of special in built

inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific location at site in

line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case the casting shall

be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP by Engineer in charge.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

151 Supplying of factory made Precast Lid having length of 500 mm, width suitable for placing on U - Shape storm water drain (PUSD) sizes 300 X 300 mm, 25.00 Rmt. 1,195.80 Rupees One Thousand

thickness of 60 mm respectively. Lid should have T-6 load carrying capacity – 4.8 T Axle Load – 2.4 T Wheel Load, confirming to JIS & meeting IS One Hundred NinetyFive

requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for Paise Eighty Only

reinforcement. The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake. Lid should have

anti-skid finish at top. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined

condition, as per approved QAP as per Engineer in charge.

152 Supplying of factory made FUJI Silvertech precast U shape storm water drain of size 450 mm x 450 mm x 2000 mm long, T-6 load carrying capacity – 4.8 143.00 Rmt. 4,923.87 Rupees Four Thousand

T Axle Load – 2.4 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Nine Hundred

Fe500D shall be use for reinforcement. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each TwentyThree Paise

storm water drain for jointing two precast storm water drain using cement mortar or suitable non shrink grout. The precast utility duct must consist of EightySeven Only

special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific

location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case

the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP by

Engineer in charge.

153 Supplying of factory made Precast Lid having length of 500 mm, width suitable for placing on U - Shape storm water drain (PUSD) sizes 450 x 450 mm, 143.00 Rmt. 1,899.21 Rupees One Thousand

thickness of 70 mm respectively. Lid should have T-6 load carrying capacity – 4.8 T Axle Load – 2.4 T Wheel Load, confirming to JIS & meeting IS Eight Hundred NinetyNine

requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for Paise TwentyOne Only

reinforcement. The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake. Lid should have

anti-skid finish at top. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined

condition, as per approved QAP as per Engineer in charge..

154 Supplying of factory made precast U shape surface storm water drain of size 600 mm x 600 mm x 2000 mm long, T-25 load carrying capacity - 10 T Axle 227.00 Rmt. 10,317.15 Rupees Ten Thousand

Load - 5 T Wheel Load confirming to JIS meeting IS requirements having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Three Hundred Seventeen

Cube Strength & Fe500D shall be use for reinforcement. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on Paise Fifteen Only

both sides of each Storm water drain for jointing two precast drains using cement mortar or suitable non shrink grout. The precast Storm water drain

must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation

,installation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of

engineer in charge. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined

condition, as per approved QAP as by Engineer incharge.

155 Supplying of factory made Precast standard Lid (standard perforation) having length of 500 mm, width suitable for placing on DU - Shape Drain (DUSD) 227.00 Rmt. 5,705.49 Rupees Five Thousand

sizes 600 X 600 mm, thickness of 145 mm respectively. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS Seven Hundred Five Paise

& meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D FourtyNine Only

shall be used for reinforcement. The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water

intake.Lid should have anti-skid finish at top (except 300 size). In no case the casting shall be allowed to be prepared at site. It should be casted in the

stringent atmospheric & pre-defined condition, as per approved Engineer in charge.

156 EXTERNAL DRAINAGE 85.00 Rmt. 2,244.22 Rupees Two Thousand

Providing, laying, jointing and testing SN8 Foam core/ Rex under 150 mm diameter ground drainage pipes approved make laid to required alignment Two Hundred FourtyFour

and slope with joints in C.M. 1:1 (fine sand) in pipe trenches incl. excavation in all soil types, bailing or pumping out water from trenches, shoring, Paise TwentyTwo Only

whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away

to lead of 50 meters as directed incl. cement concrete bedding 1:3:6, 150mm thick. (depth up to 1000 mm to invert). (Make: Ashirvad / Astral / D-Rex )

157 Providing, laying, jointing and testing SN8 Foam core/ Rex under 200 mm diameter ground drainage pipes approved make laid to required alignment 10.00 Rmt. 3,260.28 Rupees Three Thousand

and slope with joints in C.M. 1:1 (fine sand) in pipe trenches incl. excavation in all soil types, bailing or pumping out water from trenches, shoring, Two Hundred Sixty Paise

whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away TwentyEight Only

to lead of 50 meters as directed incl. cement concrete bedding 1:3:6, 150mm thick. (depth up to 1000 mm to invert). (Make: Ashirvad / Astral / D-Rex )

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

158 Providing & fixing S.W. Gully trap with C.I.grating brick masonary chamber & water tight C.I. Cover with frame of 300x300 mm size (inside )with standard 15.00 Nos. 1,292.19 Rupees One Thousand

weight. Square mouth trap 100mm x 100mm size P- type Two Hundred NinetyTwo

Paise Nineteen Only

159 Providing and fixing, best Indian make 1st quality, salt glazed PVC Sewer (intercepting) trap, of 150 mm. x 150 mm. size with cleaning eye cap and metal 15.00 Nos. 7,402.29 Rupees Seven Thousand

stopper chain, set in CC 1:2:4 etc., complete in last manhole including vent / fresh air pipe. Four Hundred Two Paise

TwentyNine Only

160 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in 6.00 Nos. 3,660.76 Rupees Three Thousand

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover Six Hundred Sixty Paise

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete SeventySix Only

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

161 Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(ii) for 500mm x 700mm 6.00 Each 264.86 Rupees Two Hundred

size. SixtyFour Paise EightySix

162 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 6.00 Nos. 11,029.46 Rupees Eleven Thousand

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) TwentyNine Paise

finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm FourtySix Only

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

163 (I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M. 8.00 Each 522.96 Rupees Five Hundred

TwentyTwo Paise

NinetySix Only

164 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the p pes in C.M.1:2 15.00 Rmt 2,107.39 Rupees Two Thousand

watering and laying (to level or slope)of I.S. class NP2 of following internal diameters. (v) 900mm dia. One Hundred Seven Paise

ThirtyNine Only

165 Supply, installation, testing and commissioning of Hydro pneumatic Horizontal Multistage Pump's system, PRESSURISED WATER FROM OHT TO UTILITIES 1.00 Each 4,74,769.69 Rupees Four Lakh

:- SeventyFour Thousand

Each Pump Flow : 5 m3/hr, Each Pump Head : 30 Mtr, Seven Hundred SixtyNine

Pump MOC : Pump Head & Base - CED Coated CI, Assembly - SS304, SUC & DEL - 40x40 mm Paise SixtyNine Only

Each Pump Motor: 1.1 KW (1.5 HP), 2Pole, 3Phase, 50Hz, IE3.

Control Panel (1W+1S) : Control Panel IP54 Equivalent, Multi VFD based inbuilt PLC & Cascade opetation.

Pressure Tank - 60 Litre pressure tank (Globle make, 10 Bar).

Scope of Supply : Pumpset (2 Nos.) Skid Mounted, Control Panel (Wall Mounted 1 No), Suction & Discharge Header with Isolation & NRV, Pressure

Guage & Pressure transmitter, Pressure tank, Air Vent Valve .

166 Supply, installation, testing and commissioning of Horizontal Multistage centrifugal Pump's system for Hot Water Re - Circulating (Return Line Pump) :- 1.00 Each 60,737.36 Rupees Sixty Thousand

Each Pump Flow : 1 m3/hr. Seven Hundred

Each Pump Motor : 0.37 KW (0.5 HP) , 2 Pole, 50Hz. ThirtySeven Paise

Control Panel : Temperature Sensor Operated Panel with Timer. ThirtySix Only

Scope of supply : Pump, control panel with Temerature sensor, NRV.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

167 Supply Instalation,Testing,Commissioning of packaged water Heat Pump made with water resistant materials and capable for outdoor installation. The 1.00 Each 2,61,693.02 Rupees Two Lakh

Heat Pump System should have fully Rotary compressor. The compressors should be Shall and tube heat exchanger type profile ptimized for eco SixtyOne Thousand Six

friendly R410A refrigerant. The unit must have rubber supports. The plant heat exchanger must have copper brazed plate type with cover plates, plates Hundred NinetyThree

and connections in AISI 316 stainless steel. The unit must be equipped with a thermostatic expansion valve. The electric panel must have operator Paise Two Only

based control system. The operating ambient conditions should be between 45°C and 10°C.

Input Kw/hr - 1.2 KW, Output Kw/hr - 4.6 kw.

Emerson Expansion valve, Multi function digital control panel,

Max. Temp. 60 C, Operating ambient condition -5 c to 45 c.,

Heating capacity - 100 L/hr. ΔΤ 40° C.

Hot water heater Tank :

 300 Ltr Steel with Glass enamel vertical tank with 125 mm PUF insulation.

168 SECTION 1.00 POINT WIRING 92.00 Pt. 151.50 Rupees One Hundred

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi FiftyOne Paise Fifty Only

strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary light with accessories

erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

169 Point wiring in Copper (Modular) 70.15 Pt. 459.55 Rupees Four Hundred

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand FiftyNine Paise FiftyFive

copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of Only

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

170 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper 11.50 Pt. 629.23 Rupees Six Hundred

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME four or more step type electronic fan TwentyNine Paise

regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting TwentyThree Only

base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

171 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper 23.58 Pt. 473.69 Rupees Four Hundred

wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box SeventyThree Paise

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. SixtyNine Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

172 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper 29.90 Pt. 697.91 Rupees Six Hundred

wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box NinetySeven Paise

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. NinetyOne Only

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete (FRLS) CAT III

173 Point wiring for Individual Plug with & earth wire of 2.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper 3.45 Pt. 818.10 Rupees Eight Hundred

wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box Eighteen Paise Ten Only

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete CAT III

174 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame 63.83 Pt. 241.39 Rupees Two Hundred

covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories Cat-III FourtyOne Paise

ThirtyNine Only

175 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC 9.20 Pt. 560.55 Rupees Five Hundred

insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Sixty Paise FiftyFive Only

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

176 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / 2.30 Ea. 179.78 Rupees One Hundred

metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. SeventyNine Paise

(4) TV Co-axial Socket outlet Cat-III SeventyEight Only

177 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / 25.00 Ea. 28.28 Rupees TwentyEight Paise

metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. TwentyEight Only

(7) Blank Plate Single Cat-III

178 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / 4.60 Ea. 153.52 Rupees One Hundred

metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. FiftyThree Paise FiftyTwo

(8) Computer RJ-45 socket Cat.III Only

179 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / 4.00 Ea. 40.40 Rupees Fourty Paise

metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. Fourty Only

Call bell gong type suitable for 230 volts, 50 c/s. AC supply complete Erected

180 Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / 4.00 Ea. 68.68 Rupees SixtyEight Paise

metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge.Decorative call bell Ting- SixtyEight Only

tong box type 250 volts complete erected

181 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC 467.50 Mtr. 32.32 Rupees ThirtyTwo Paise

fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed ThirtyTwo Only

b) 25 mm (for PA, CCTV & data & voice)

182 Mains & Wires 1,056.00 Mtr. 59.59 Rupees FiftyNine Paise

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected FiftyNine Only

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm (FRLS)

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

183 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected 775.50 Mtr. 78.78 Rupees SeventyEight

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Paise SeventyEight Only

following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

184 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in 850.00 Mtr. 107.06 Rupees One Hundred

/ on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (FRLS) Seven Paise Six Only

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm (FRLS)

185 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in 120.00 Mtr. 248.46 Rupees Two Hundred

/ on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (FRLS) FourtyEight Paise

(A) with medium class Rigid PVC pipe and accessories FourtySix Only

(h) 4 wire 6 sq. mm (frls)

186 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape 50.00 Mtr. 446.42 Rupees Four Hundred

& sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of FourtySix Paise

conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm FourtyTwo Only

(b) Armoured [Jelly Filled]

(3) Fifty Pairs

187 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape 82.50 Mtr. 19.19 Rupees Nineteen Paise

& sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of Nineteen Only

conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm

(a) Unarmoured

(2) Two Pairs

188 Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips (c) Suitable for 50 pair 1.00 Ea. 1,678.62 Rupees One Thousand Six

Hundred SeventyEight

Paise SixtyTwo Only

189 Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC box erected flushed on wall or concealed in wall with 45.00 Ea. 45.45 Rupees FourtyFive Paise

necessary plastering & finishing as directed of following size. FourtyFive Only

190 Providing & Erecting 3mm thick acrylic Sheet with grooving as directed 180.00 Sq. Inch. 3.03 Rupees Three Paise Three

191 Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE 83.00 Mtr. 59.59 Rupees FiftyNine Paise

& Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. FiftyNine Only

192 SECTION 2.00 CABLES & ACCESSORIES 50.00 Mtr. 1,367.54 Rupees One Thousand

ARMOURED ALLUMINIUM CABLES. Three Hundred

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or SixtySeven Paise FiftyFour

in existing trench / pipe /in cable tray of following size of cables Only

(I) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

193 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or 525.00 Mtr. 1,128.17 Rupees One Thousand

in existing trench / pipe /in cable tray of following size of cables One Hundred

(H) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) TwentyEight Paise

Seventeen Only

194 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or 120.00 Mtr. 534.29 Rupees Five Hundred

in existing trench / pipe /in cable tray of following size of cables ThirtyFour Paise

(E) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) TwentyNine Only

195 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or 10.00 Mtr. 281.79 Rupees Two Hundred

in existing trench / pipe /in cable tray of following size of cables EightyOne Paise

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) SeventyNine Only

196 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary 570.00 Mtr. 253.51 Rupees Two Hundred

clamps or in existing trench / pipe /in cable tray of following size of cables FiftyThree Paise FiftyOne

(C) 4 core 35 Sq. mm Only

197 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary 570.00 Mtr. 188.87 Rupees One Hundred

clamps or in existing trench / pipe /in cable tray of following size of cables EightyEight Paise

(B) 4 core 25 Sq. mm EightySeven Only

198 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary 120.00 Mtr. 151.50 Rupees One Hundred

clamps or in existing trench / pipe /in cable tray of following size of cables FiftyOne Paise Fifty Only

A) 4 Core 16 Sq.mm.

199 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary 120.00 Mtr. 138.37 Rupees One Hundred

clamps or in existing trench / pipe /in cable tray of following size of cables ThirtyEight Paise

c) 4 Core 10 Sq.mm. ThirtySeven Only

200 ARMOURED COPPER CABLES. 175.00 Mtr. 383.80 Rupees Three Hundred

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in EightyThree Paise Eighty

existing trench / pipe at road crossing / in cable tray of following size of cables. Only

b) 3 Core 6 Sq.mm

201 ARMOURED COPPER CABLES. 165.00 Mtr. 275.73 Rupees Two Hundred

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in SeventyFive Paise

existing trench / pipe at road crossing / in cable tray of following size of cables. SeventyThree Only

(a) 3 core 2.5 Sq. mm

202 ARMOURED COPPER CABLES. 165.00 Mtr. 203.01 Rupees Two Hundred

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in Three Paise One Only

existing trench / pipe at road crossing / in cable tray of following size of cables.

(B) 3 core 4 Sq. mm

203 CABLE GLANDS. 25.00 Ea. 22.22 Rupees TwentyTwo Paise

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, TwentyTwo Only

insulating tape etc for following size of cables.

(a) 2 to 4 core 2.5 / 4 Sq. mm

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

204 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 25.00 Ea. 27.27 Rupees TwentySeven

insulating tape etc for following size of cables. Paise TwentySeven Only

(b) 2 to 4 core 6 Sq. mm

205 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 65.00 Ea. 27.27 Rupees TwentySeven

insulating tape etc for following size of cables. Paise TwentySeven Only

(c) 2 to 4 core 10 Sq. mm

206 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 45.00 Ea. 36.36 Rupees ThirtySix Paise

insulating tape etc for following size of cables. ThirtySix Only

(d) 2 to 4 core 16 Sq. mm

207 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 45.00 Ea. 40.40 Rupees Fourty Paise

insulating tape etc for following size of cables. Fourty Only

(E) 2 to 4 core 25 Sq. mm

208 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 4.00 Ea. 241.39 Rupees Two Hundred

insulating tape etc for following size of cables. FourtyOne Paise

(I) 3 & 1/2 core 300 Sq. mm ThirtyNine Only

209 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 2.00 Ea. 217.15 Rupees Two Hundred

insulating tape etc for following size of cables. Seventeen Paise Fifteen

(H) 3 & 1/2 core 240 Sq. mm Only

210 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, 2.00 Ea. 120.19 Rupees One Hundred

insulating tape etc for following size of cables. Twenty Paise Nineteen

(E) 3 & 1/2 core 120 Sq. mm Only

211 Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete 16.00 Ea. 55.55 Rupees FiftyFive Paise

with out going tails, insulating tape etc for following size of cables. FiftyFive Only

3 core 35/50 Sq. mm

212 CABLE LUGS. 260.00 Ea. 11.11 Rupees Eleven Paise

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to Eleven Only

switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

(B) 10 Sq.mm (ISI MARKED)

213 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to 180.00 Ea. 12.12 Rupees Twelve Paise

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Twelve Only

(C) 16/25 Sq.mm. (ISI MARKED)

214 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to 64.00 Ea. 20.20 Rupees Twenty Paise

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Twenty Only

215 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to 8.00 Ea. 34.34 Rupees ThirtyFour Paise

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. ThirtyFour Only

(G) 120 Sq.mm. (ISI MARKED)

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

216 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to 8.00 Ea. 70.70 Rupees Seventy Paise

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Seventy Only

(J) 240 Sq.mm. (ISI MARKED)

217 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to 16.00 Ea. 78.78 Rupees SeventyEight

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Paise SeventyEight Only

(K) 300 Sq.mm. (ISI MARKED)

218 Providing and erecting Epoxy Outdoor / Indoor end termination Kit suitable for LT PVC insulated armoured cable1.1 KV grade complete with ferrule 25.00 Ea. 883.75 Rupees Eight Hundred

bushing and accessories and suitable clamps duly erected and connected to the supply for all cores cables of following size. EightyThree Paise

(F) 400 / 500 Sq. mm SeventyFive Only

219 Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the 450.00 Mtr. 46.46 Rupees FourtySix Paise

surface as normal ground. FourtySix Only

220 Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply by making up to following size of holes at 262.50 Mtr. 411.07 Rupees Four Hundred

both ends complete. Eleven Paise Seven Only

(A) Up to 100 mm bore dia

221 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 35.00 Ea. 10,484.81 Rupees Ten Thousand

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) Four Hundred EightyFour

finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm Paise EightyOne Only

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter

222 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting 950.00 Mtr. 137.36 Rupees One Hundred

accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable ThirtySeven Paise

(D)120 mm outer dia. ThirtySix Only

223 SECTION 3.00 SWITCHGEARS & DISTRIBUTION BOARDS 53.00 Ea. 112.11 Rupees One Hundred

MINIATURE CIRCUIT BREAKERS. Twelve Paise Eleven Only

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with ISI Mark (QTY FOR MCB OF DB AND MCB OF PANEL)

224 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 2.00 Ea. 711.04 Rupees Seven Hundred

having following capacity((QTY FOR MCB OF DB AND MCB OF PANEL)Also consider in general) Cat-III Eleven Paise Four Only

(c)63 Amp. Cat.III

225 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 5.00 Ea. 278.76 Rupees Two Hundred

having following capacity(QTY FOR MCB OF DB AND MCB OF PANEL)Cat-III SeventyEight Paise

(A) 6 to 32 Amp. Cat-III SeventySix Only

226 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 1.00 Ea. 737.30 Rupees Seven Hundred

having following capacity((QTY FOR MCB OF DB AND MCB OF PANEL)Also consider in general) Cat-III ThirtySeven Paise Thirty

(c)63 Amp. Cat.III Only

227 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 14.00 Ea. 595.90 Rupees Five Hundred

having following capacity((QTY FOR MCB OF DB AND MCB OF PANEL)Also consider in general) Cat-III NinetyFive Paise Ninety

(A) 6-32 Amp Cat.III Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

228 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 5.00 Ea. 642.36 Rupees Six Hundred

having following capacity((QTY FOR MCB OF DB AND MCB OF PANEL)Also consider in general) Cat-III FourtyTwo Paise ThirtySix

(B) 40 Amp Cat.III Only

229 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having 5.00 Ea. 612.06 Rupees Six Hundred

following capacity(QTY FOR MCB OF DB AND MCB OF PANEL) Cat-III Twelve Paise Six Only

(b)40 Amp. Cat.III

230 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN 1.00 Ea. 885.77 Rupees Eight Hundred

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to EightyFive Paise

be used) suitable for SeventySeven Only

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(iii)6 way Cat-III

231 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN 2.00 Ea. 3,412.79 Rupees Three Thousand

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to Four Hundred Twelve

be used) suitable for Paise SeventyNine Only

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (IP-43)

(iii)8 way Cat-III

232 EARTH LEAKAGE CIRCUIT BREAKERS. 5.00 Ea. 2,235.13 Rupees Two Thousand

providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 Two Hundred ThirtyFive

KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate Paise Thirteen Only

any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP

233 providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 2.00 Ea. 1,969.50 Rupees One Thousand

KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate Nine Hundred SixtyNine

any electronic component. for following Max. rating erected as directed Paise Fifty Only

(i) 25 Amps.DP

234 providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current 4.00 Ea. 6,043.84 Rupees Six Thousand

rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete FourtyThree Paise

erected in existing 16 G.M.S. housing. EightyFour Only

Operational Handle Assembly Complete for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

235 providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current 4.00 Ea. 16,092.33 Rupees Sixteen Thousand

rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing NinetyTwo Paise

16 G.M.S.housing ThirtyThree Only

Operational Handle Assembly Complete for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same. ICS=100% of ICU only Cat III

236 providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at 415 V having 1.00 Ea. 25,049.01 Rupees TwentyFive

Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections & complete Thousand FourtyNine

erected in existing 16 G.M.S. housing. Paise One Only

Operational Handle Assembly Complete for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same.ICS=100% of ICU only Cat III

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

237 providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and above at 415 V having 1.00 Ea. 25,049.01 Rupees TwentyFive

Normal current rating 630A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections & complete Thousand FourtyNine

erected in existing 16 G.M.S. housing. Paise One Only

Operational Handle Assembly Complete for (ii) 200 / 250 / 320 / 400 / 630 / 800 Amps

The cost inclusive of spreader links and rotary handle. No extra price will be provided for the same.ICS=100% of ICU only Cat III

238 providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit 4.00 Ea. 4,558.13 Rupees Four Thousand

breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing Five Hundred FiftyEight

M.S.housing.. Paise Thirteen Only

(1) 15 A -100 A , CT Ratio 1/100

239 providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit 4.00 Ea. 4,854.06 Rupees Four Thousand

breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing Eight Hundred FiftyFour

M.S.housing.. Paise Six Only

(2) 125 A -200 A , CT Ratio 1/200

240 providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of moulded case circuit 4.00 Ea. 5,286.34 Rupees Five Thousand

breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing Two Hundred EightySix

M.S.housing.. Paise ThirtyFour Only

(3) 250 A -400 A , CT Ratio 1/400

241 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more 1.00 Rn.Mtr 582.77 Rupees Five Hundred

than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying EightyTwo Paise

capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary SeventySeven Only

connections.

(A) Suitable for 100 Amp. Capacity

242 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more 1.00 Rn.Mtr 959.50 Rupees Nine Hundred

than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying FiftyNine Paise Fifty Only

capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary

connections.

(B) Suitable for 200 Amp. capacity

243 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more 2.00 Rn.Mtr 2,910.82 Rupees Two Thousand

than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying Nine Hundred Ten Paise

capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary EightyTwo Only

connections.

(E) Suitable for 630 Amp. capacity

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

244 CUPBOARDS. 43.00 Sq. Mtr 20,564.61 Rupees Twenty Thousand

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above Five Hundred SixtyFour

protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for Paise SixtyOne Only

internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(C) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory as per IEC 61439 for beneficial use.

(ii) with 550 mm. depth

245 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-42 and above 35.00 Sq. Mtr 15,629.75 Rupees Fifteen Thousand

protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for Six Hundred TwentyNine

internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal Paise SeventyFive Only

partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.

(C) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory as per IEC 61439 for beneficial use.

(i) with 350mm depth

246 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated 167.00 Mtr. 84.84 Rupees EightyFour Paise

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control EightyFour Only

wiring) with required size of copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm

247 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated 198.00 Mtr. 14.14 Rupees Fourteen Paise

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control Fourteen Only

wiring) with required size of copper lugs, nuts and bolts if required.

(b) One wire 1.50 sq. Mm

248 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated 198.00 Mtr. 131.30 Rupees One Hundred

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control ThirtyOne Paise Thirty

wiring) with required size of copper lugs, nuts and bolts if required. Only

(g) One wire 16.00 sq. Mm

249 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated 198.00 Mtr. 23.23 Rupees TwentyThree

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control Paise TwentyThree Only

wiring) with required size of copper lugs, nuts and bolts if required.

(c) One wire 2.50 sq. mm

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

250 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated 198.00 Mtr. 32.32 Rupees ThirtyTwo Paise

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control ThirtyTwo Only

wiring) with required size of copper lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm

251 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated 198.00 Mtr. 50.50 Rupees Fifty Paise Fifty

conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control Only

wiring) with required size of copper lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm

252 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, 45.00 Kg. 57.57 Rupees FiftySeven Paise

channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of FiftySeven Only

engineer in charge with necessary grouting, cementing, plastering & finishing complete.

253 providing and erecting ,Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other hardware materials as per 45.00 Kg. 146.45 Rupees One Hundred

requirement design with finishing by three tank powder coating processed inside and outside painted, erected as directed including minor civil work FourtySix Paise FourtyFive

254 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with 2.00 Ea. 240.38 Rupees Two Hundred

insulating materials connected to the meter Fourty Paise ThirtyEight

255 Supplying and erecting approved make suitable panel indicator lamps of LED type lamp, lens cover, Bakelite holder complete erected with necessary 150.00 Ea. 34.34 Rupees ThirtyFour Paise

connections.WITH SWITCH FOR BMS INTEGRATION FOR ALL FEEDERS OF PANELS. (For R-Y-B & on-off-trip indication) ThirtyFour Only

256 Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following Voltage, Frequency, 3.00 NOS 13,695.60 Rupees Thirteen

Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average voltage Vavg, Peak demand power PM, QM, SM, Thousand Six Hundred

Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor and displacement PF (signed, four quadrant), Calculated neutral NinetyFive Paise Sixty Only

current, Active, reactive, apparent energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents,

Average current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz,

40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red, Messages display capacity 3 fields of

characters, Display digits 12 digit(s) - 14.2 mm in height

257 Supplying & fixing Steel Chequered Plate having 7 mm thickness, duly painted with two coats of black Japan colour. (Average Wt 61.1 kg / Sq.Mtr) 10.00 Sq.Mtr. 3,346.13 Rupees Three Thousand

Three Hundred FourtySix

Paise Thirteen Only

258 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle 2.00 Ea. 3,423.90 Rupees Three Thousand

with cable clamps to be buried in ground to have appropriate erection to work uniform until erected with cement concrete foundation and 45 cm high Four Hundred

bricks work finishing with plaster etc. hinged double door internally supported on both side, with internal and outside looking arrangement with look TwentyThree Paise Ninety

and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section Only

Pillar inside and out side with three tank powder coated paint. section pillar roof should be without joint with water leakage proof & tested as per IP

test & followed by IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long made from 35 X

35 X 5 mm thick MS angle.

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

259 Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should be type tested as per IEC 1.00 NOS 2,78,178.24 Rupees Two Lakh

61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SeventyEight Thousand

SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection,Copper One Hundred

tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning SeventyEight Paise

Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCB with Sc, OL, internal earth fault TwentyFour Only

relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs

Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting, Cable entry as per site

situation,Cooling fans for panel (C)100KVAR

260 SECTION 4.00 LIGHT FIXTURE AND FAN 26.45 Nos 347.44 Rupees Three Hundred

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall FourtySeven Paise

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with FourtyFour Only

company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

(A) Tube Light with integral driver

(d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll Cat-lll

261 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall 3.45 Nos 312.09 Rupees Three Hundred

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with Twelve Paise Nine Only

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

(H) Mirror /PICTURE Light 9 Watts, wall mounted minimum 1 feet long

262 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall 133.40 Nos 427.23 Rupees Four Hundred

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with TwentySeven Paise

diffuser housed in aluminium casted body with company mark/name TwentyThree Only

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-lll

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

263 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall 18.40 Nos 220.18 Rupees Two Hundred

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with Twenty Paise Eighteen

diffuser housed in aluminium casted body with company mark/name Only

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV Cat-lll

264 Repairing of existing indoor LED light fixture(tube light/panel light/spot light/strip light/decorative wall lights etc as per sample )by suitable driver 2 kv 4.60 Nos 377.74 Rupees Three Hundred

according to LED PCB as per requirement of following rating wattage capacity . SeventySeven Paise

(D) 16-24 watt capacity SeventyFour Only

265 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, 25.00 Nos 4,733.87 Rupees Four Thousand

efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded Seven Hundred

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power ThirtyThree Paise

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( EightySeven Only

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block.IP

(ii)32-40W Cat-lll

266 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, 40.00 Nos 10,646.41 Rupees Ten Thousand Six

efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded Hundred FourtySix Paise

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power FourtyOne Only

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.

(vii) above 200 to 250 watts Cat-lll

267 (c) LED Bollard fittings of minimum height 1000 mm & dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished 5.25 Nos 4,331.89 Rupees Four Thousand

powder coated pipe with base plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for 18watt and above ,surge- Three Hundred ThirtyOne

4kv cat-III Paise EightyNine Only

268 Supply, Installation, assembling, connection, testing & commissioning of 10-12 W LED complete with all the required Spike/Shrub up light ,Min IP 66 30.00 Nos. 5,050.00 Rupees Five Thousand

Classification with Min 100 Lumens /watt,With ip-67 junction box at each fixture. Fifty Only

269 Supply, Installation, assembling, connection, testing & commissioning of 12-20 W LED complete with all the required Ground burial light ,Min IP 66 10.00 Nos. 5,555.00 Rupees Five Thousand

Classification with Min 100 Lumens /watt,With ip-67 junction box at each fixture. Five Hundred FiftyFive

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

270 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip 25.00 Nos. 5,273.21 Rupees Five Thousand

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, Two Hundred

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to be erected With Suitable SeventyThree Paise

foundation (Included) as per details given by manufacturer considering site requirement. (B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm TwentyOne Only

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long J-Bolt.Approx weight 37 kg

271 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip 10.00 Nos. 3,955.16 Rupees Three Thousand

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, Nine Hundred FiftyFive

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to be erected With Suitable Paise Sixteen Only

foundation (Included) as per details given by manufacturer considering site requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia.3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long J-Bolt.Approx weight 29 kg

272 Providing and erecting C.I./M.S. flange type base plate of 300mm x 300mm x 6mm 35.00 Nos. 210.08 Rupees Two Hundred Ten

Paise Eight Only

273 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground 35.00 Nos. 637.31 Rupees Six Hundred

level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ThirtySeven Paise

( for 4 & 6 mtr pole) ThirtyOne Only

274 Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole having following general Specification. 4.00 Nos. 1,72,290.85 Rupees One Lakh

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring SeventyTwo Thousand

and rubber lines for erection of luminaries of suitable site. Two Hundred Ninety

(b) Maximum telescopic section not more than four

Paise EightyFive Only

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor and switchgears having door not more than 1400mm x 300mm with waterproof gasket & hinges &

locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears with control panel.(g) bottom section shall have suitable size of thickness

supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing & commissioning of the entire structure for following size of High Mast poles

[5] High Mast 18 Mtr. TOP A/F 150 Mm, BOTTOM A/F 450 Mm, No. of Sec. No. - 2, Bottom Thickness - 4 mm, Top Sec. - 3 mm Size Base Plate - dia. 630 mm x 16 mm

thick, Foundation Bolt Size M24 x 880 mm, Qty - 10 Nos., Suitable for mounting Fitting of Light - 10 Nos.

275 FANS & ACCESSORIS. 11.50 Ea. 2,311.89 Rupees Two Thousand

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having Three Hundred Eleven

3 blades aluminium body and blade sets having ornamental design shanks , canopy erected with earthing. [ Make shall be approved by Engineer in Paise EightyNine Only

276 FAN ACCESSORIES. 11.50 Mtr. 108.07 Rupees One Hundred

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation Eight Paise Seven Only

without leakage and earthing.

277 Supplying & erecting S type Fan Hook of 10 mm M.S. Roundbar grouted in RCC slab with Making the site as original. 11.50 Ea. 43.43 Rupees FourtyThree Paise

FourtyThree Only

278 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge 11.50 Ea. 108.07 Rupees One Hundred

M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.. Eight Paise Seven Only

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

279 Providing Fan clamp of 30 x 5 mm flat/Stype hook of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. 11.50 Ea. 98.98 Rupees NinetyEight Paise

NinetyEight Only

280 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 11.50 Ea. 18.18 Rupees Eighteen Paise

Eighteen Only

281 TABLE FANS, EXHAUST FANS & ACCESSORIES. 10.35 Ea. 1,366.53 Rupees One Thousand

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. Three Hundred SixtySix

250mm with 1350 RPM cat-ii Paise FiftyThree Only

282 SECTION 5.00 EARTHING AND LIGHTINING PROTECTION 109.68 Kg. 77.77 Rupees SeventySeven

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Paise SeventySeven Only

proper clamp.

283 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 20.00 Kg. 77.77 Rupees SeventySeven

Paise SeventySeven Only

284 For using salt and charcoal / coke as required for pipe type earthing. 10.00 Ea. 202.00 Rupees Two Hundred Two

285 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment 6.00 Ea. 5,992.33 Rupees Five Thousand

friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy Nine Hundred NinetyTwo

duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). Paise ThirtyThree Only

286 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000-4000 mm long. Air Termination Base tested for conditioning, Ageing 5.00 Ea. 9,416.23 Rupees Nine Thousand

Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 Four Hundred Sixteen

2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized Paise TwentyThree Only

287 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party 105.00 Mtr. 299.97 Rupees Two Hundred

laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr distance, Aluminium/SS cross NinetyNine Paise

splicer at every crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. NinetySeven Only

All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test:

kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the

requirements of IS/IEC

288 SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use exclusively for lightning protection (Vertical Riser/Down 432.00 Mtr. 728.21 Rupees Seven Hundred

Conductor which shall be concealed in Column) to meet the requirement of IS IEC 62305 With Accessories - Earthing stud of dimension SS-75mm OD TwentyEight Paise

plate with 10mm dia tail connector used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For Interconnecting the TwentyOne Only

Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector to connect Earth fixing point to vertical raiser/Down conductor, SS Straight

Splicer at every 4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting round conductor with

reinforcement inside the concrete for structural earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing point. All

Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA

of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the

requirements of IS/IEC

289 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron 225.00 Mtr 154.53 Rupees One Hundred

coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding. FiftyFour Paise FiftyThree

Quantities Rate

Item estimated

Description of Item (with brief specification and reference to book of specifications) Unit Amount

No but may be In Figure In Words

more or less

290 Section 6.00 CCTV & Storage 6.00 NO 9,965.67 Rupees Nine Thousand

Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Dome Type Camera, Nine Hundred SixtyFive

H.265 4MP IR Vandal Proof Dome N/W Camera, 2.8mm/3.6mm, 30M IR, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7" CMOS, 2560 × 1440, 0.01 Paise SixtySeven Only

Lux, F1.2, AGC ON; Defog, True day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber Security, Basic intelligent video

analytics, NDAA Compliance, UL, CE, FCC Certified (Including Five year free maintenance with guarantee)

291 Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Bullet Type Camera, 6.00 NO 9,965.67 Rupees Nine Thousand

H.265 4MP IR Bullet N/W Camera, 3.6mm / 6mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True day/night, Nine Hundred SixtyFive

Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber Security Basic intelligent video analytics, NDAA Compliance, UL, CE, FCC Paise SixtySeven Only

Certified (Including Five year free maintenance with guarantee)

292 SITC of 43 Inch 500 NTS Brightness professional Display with Direct-Type LED, Viewing Angle : 178 Degree Verti, 178 Degree Hor. Operation 27x7, Native 1.00 NO 1,26,250.00 Rupees One Lakh

Resolution 3840 x 2160 (16:9) - UHD, 4 x USB (2 x 2.0, 1 x 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML 5 Browser Opera(4.9), Yes(internal) IEEE TwentySix Thousand Two

802.11 a/b/g/n Dual Hundred Fifty Only

WiFi certificated, BIS, YES CLASS A 3dB margin. (Including Five year free maintenance with guarantee)

293 Supply, Installation, Testing and Comissioning of 32 Channel Network Video Recorder (NVR), Support 8CH@2MP, H.264 Video Compression, HDMI, VGA 1.00 NO 68,794.13 Rupees SixtyEight

output, up to 4 SATA interface each with max 6 TB support, bandwidth 200 mbps, CE FCC, BIS, Operating Temp -10 deg to 50 deg C, USB and serial Thousand Seven Hundred

Interface (Including Five year free maintenance with guarantee) NinetyFour Paise Thirteen

Total Amount

Total Amount

Rupees Twelve Crore FiftyTwo Lakh FourtyOne Thousand Nine Hundred ThirtyThree Paise NinetyFour Only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

*Estimated Amount *Estimated Amount

Put On Tender Rs. 12,52,41,933.94 Put On Tender Rs.

Deduct………. % Below Rs. ………………………………. Add ……….. % Above Rs. …………………………..

Net Rs.:……………………………… Total Rs. : ………………………………………

In Words : …………………………………………………. In Words : ………………………………………………….

(* Please strike out whichever is not applicable.)

Note-1 All works shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

GM\Wv! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALÒ BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Note-2 All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

GM\WvZ VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL S\8=FS8Z[ 5MTFGL ;CL SZJLP

Note-3 Rates quoted include clearance of site (prior commencement of work and at its close)in all respects and hold good for work under all conditions, site, moisture, weather etc.

GM\Wv૩ 8F\S[,F NZDF\4 :Y/GL sSFDGF VFZ\E[ VG[ 5]~ YFI T[ JBT[f NZ[S ZLT[ ;FO;}OL SZJFGM ;DFJ[X YFI K[4 VG[ T[ NZ TDFD 5lZl:YlT4 :Y/4 E[H4 CJFDFG JU[Z[ C[9/ SFD DF8[ VD,DF\ ZC[X[P

Note-4 To be continued on additional sheets, if found necessary.

GM\Wv૪ H~Z H6FI JWFZFGF SFU/M HM0L RF,]\ ZFBJ]\P

`Signature of Contractor with Seal Signature of Contracting Authority with Seal