Providing, Supply And Erecting of LED Street Light With Wiring and Highmast Tower With 1-Year Replacement Warranty as per various location chart Gondal Town, Dist. Rajkot Under 15th Finance Grant Year-2025-26

NAME OF WORK:- PROVIDING, SUPPLY AND ERECTING OF LED STREET LIGHT WITH WIRING AND

HIGH MAST TOWER, AS PER VARIOUS LOCATION CHART AT, GONDAL

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B-1"

2 Schedule - "B-2"

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be

writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as

Estimated Amount Estimated Amount

Put to Tender Rs. 25,56,968=00 Put to Tender Rs. 25,56,968=00

Add ……………….% Rs. Deduct ……………….% Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor Municipal Engineer

Gondal Nagarpalika

Chief Officer President

Gondal Nagarpalika Gondal Nagarpalika

GONDAL NAGARPALIKA - GONDAL

SCHEME:- 15TH FINANCE GRANT (YEAR-2025-26)

NAME OF WORK :- PROVIDING, INSTALLING, TESTING OF L.E.D.STREET LIGHT FIXTURE WITH WIRING

Location:- Various Location, At. Gondal

SCHEDULE - "B1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying & erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of following size. (A) 2 core 2.5 Sq. mm 10890.00 116.15 Mtr

Supplying and erecting Street light pole bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5mm/80mm/require size of

pole top having nuts and bolts for fixing the brackets and having spread of

mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer

and nipple with check nut complete painted with one coat.of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr 312.00 530.25 Nos

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(iii) above 24 to 36 watts Cat-lll (Cromptan,Havells,Holonix.)

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG 233.00 90.90 Kg

Insulate P.V.C.Rill 25mm 10875.00 2.00 Nos

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments

with early manual override switching for on & off without influencing the program

sequence with quartz time switch With power reserve, housed in fire proof

thermoplastic enclosure & transparent cover terminal covers erected as required

wire necessary connection erected as directed. 2626.00 10.00 Nos

Supplying & erecting power contactor ,AC3 duty for time switch complete erected

as per direction Cat III (B) 2 pole 250V 32 Amp. 2222.00 9.00 Nos

Total Amount Rs..........

Total Amount Rs..........

Stamp with Signature of Contractor Municipal Engineer

Gondal Nagarpalika

Chief Officer President

Gondal Nagarpalika Gondal Nagarpalika

GONDAL NAGARPALIKA - GONDAL

SCHEME:- 15TH FINANCE GRANT (YEAR-2025-26)

NAME OF WORK :- PROVIDING AND FIXING HIGH MAST TOWER

Location:- Bhagvatpara Nadi road Bodalsha Pir Draga, At. Gondal

SCHEDULE - "B2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast

Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep

galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring

and rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with

necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor and switchgears having

door not more than 1400mm x 300mm with waterproof gasket & hinges & locking

(f) Pole structure comprises suitable size of reversible motor, cable and necessary

switchgears with control panel.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary

switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs foundation bolts

nuts etc. cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing & commissioning

of the entire structure for following size of High Mast poles

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No. -

Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm thick, Foundation

Bolt Size M24 x 850 mm, Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos.

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally supported on both

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle. 1.00 4242.00 Nos

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(iv) above 90 to 120 watts, Cat ll 6.00 8347.65 Nos

Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity (A) 6 to 32 Amp. Cat.II

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Segment time switch suitable for

230V+10%16A. floating contacts with 24 hour dial having15/30 min. segments

with early manual override switching for on & off without influencing the

program sequence with quartz time switch With power reserve, housed in fire

proof thermoplastic enclosure & transparent cover terminal covers erected as

required wire necessary connection erected as directed. 1.00 2626.00 Nos

Supplying & erecting power contactor ,AC3 duty for time switch complete

erected as per direction Cat III (B) 2 pole 250V 32 Amp. 1.00 2222.00 Nos

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark. cat-III 6.00 116.15 Nos

Total Amount Rs..........

Total Amount Rs..........

Stamp with Signature of Contractor Municipal Engineer

Gondal Nagarpalika

Chief Officer President

Gondal Nagarpalika Gondal Nagarpalika