Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹12.2 L+₹36,306 (3.06%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹12.9 L+₹1.0 L (8.52%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹13.4 L+₹1.5 L (13.0%)Rejected-Finance OPP JASWANT PLAZA BAWA TRADING COMPANY CAMP ROAD TALAB TILLO JAMMU JAMMU JAMMU KASHMIR 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹14.5 L+₹2.6 L (22.0%)Rejected-Finance 148 MODEL TOWN PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
PERIODICAL SERVICES , PLASTER WORK AND OTHER WORKS IN CERTAIN BUILDINGS UNDER GE SAMBA AT MIL STN SAMBA
2022_MES_559327_1
GE/SMB/T-55/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SAMBA
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
₹50,000
Yes
23 Dec 2022
21 Oct 2022
21 Nov 2022
21 Oct 2022
19 Nov 2022
5 Nov 2022
21 Oct 2022 - 24 Oct 2022
Amount
Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc and removing outside defence area, complete all as specified and directed . NOTE- Work will be carried out upto 2nd storey of bldgs also as per direction of Engr-in-charge including necessary scaffolding required as per site conditions. No extra payment shall be made on this account.
Rendering 15 mm thick cement plaster in cement mortar 1:4 in two layers 5 mm thick over 10 mm thick on brick /stone/concrete surfaces finished even and smooth without using extra cement (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Rendering 10 mm thick cement plaster in cement mortar 1:6 on on brick /stone/concrete surfaces finished even and smooth without using extra cement , complete all as specified and directed.
Rendering 5 mm thick on concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement , complete all as specified and directed .
Supply only liquid water proofing compound ISI marked complete all as specified and directed
Taking down cement plaster from chajjas or facias etc, incl. dismantling of damage conerete & repair the same with PCC 1:2:4 type B-0 (using 12.5mm crushed stone aggregate) on chajjas of any width and applying 10mm thick cement plaster in CM 1:3 mixed with water proofing compound, finished even & smooth using extra cement, complete all as specified and as directed. Noe- Rate quoted shall be deemed to include for scaffolding/formwork for single/double storey building of height 8.0 mtr and making good the disturbed surfaces.(Water proofing compound shall be measured & paid separately)
Demolition of reinforced cement concrete of any description ground to 2nd floors and removing the rubbish from the work site out side defence premises, complete all as specified and as directed.
RCC M-15 (Nominal mix) 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roof slab, landing, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjjas, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and directed.
Use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor, roof and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide fair finished surfaces of concrete, complete all as specified & directed
Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a layer of wall care putty and one coat of primer, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of primer (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of ceiling, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of Oil bound distemper including making good uneven surface/ holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of ceiling, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of Oil bound distemper on ceiling . complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of interior emulsion paint on walls including making good uneven surface/ holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distampered and painted surfaces including preparation of old plaster surface of walls and applying two coats of interior emulsion paint over and including one coat of primer and two coats of Birla wall care putty . complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of cement base paint on walls (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying two coat of cement base paint on walls (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of surfaces of chajjas, fascias, columns, beams etc and applying two coats of weather proof exterior emulsion (APEX) paint and making good uneven surface/ holes with birla wall care putty coloured in same shade where ever required etc (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, chajjas, fascias, columns, beams etc and applying one coat of weather proof exterior emulsion (APEX) paint on walls including making good uneven surface/ holes with birla wall care putty coloured in same shade where ever required etc (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Preparation of old painted wooden surfaces exc 10 cm in width or girth including knotting and stopping and applying one coat of synthetic enameled paint (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Preparation of old painted steel surfaces exc 10 cm in width or girth including knotting and stopping and applying one coat of synthetic enameled paint (upto 2nd storey with necessary scaffolding), complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distampered painted surfaces including preparation of old plastered surfaces of walls and appling textured painting on walls, complete all as specified and as directed.
Writing letters or figures (Block. Roman. Italic or Indian) n.exc 30 Cm high including obliterating old writing of any description with paint to match existing work complete all as specified .
Demolition of plain cement concrete in ground floors or paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed.
50mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.
Hacking out old broken glass ( any thick, size, quality or description) from any type of wooden/steel/aluminium frames or stone/ concrete or brick surrounds (upto 4th storey) glazed with putty or fixed with beads, complete all as directed.
3.5 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc 0.5 sq each pane in any type of frame wooden/steel/aluminium (upto 4th storey with neccessory scaffolding) , complete all as specified and directed.
3.5 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc 0.5 sq each pane in any type of frame wooden/steel/aluminium (upto 4th storey with neccessory scaffolding) , complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls, pillars, cornices of over head tank etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots including rubbing with sand paper etc and applying two coats of Cement base paint (upto 21 mtr height with neccessory scaffolding). complete all as specified and directed.
Breaking the termite mounds, making holes with crow bars and pouring anti-termite chemical emulsion at the rate of 4 ltr /cum of mound, complete all as specified and directed.
Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified.
Post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified.
Post construction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified.
Camouflage painting as per existing pattern where as per required, complete all as specified and directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S RAJINDER GOODS TRANSPORT CARRIER
s k construction co
M/S BAWA TRADING CO
M/S VIJ CONSTRUCTION CO
M/S RANDHAWA
M/S RAMESHWAR ENGINEERS & BUILDERS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .