Loading…
Loading…
Tender Value
₹3.9 L
EMD Value
₹9,713
Closing Date
6 Dec 2024, 4:00 pmClosed
Assistant Executive Engineer
LSGD SUB DIVISION, CHITTUR BP
Annual Plan-CHITTUR BLOCK 2024-25 P No.179-Nallepilly PHC Bore well and related works at Nallepilyy GP-General Civil Work
2024_LSGD_709229_14
ET-3/LSGD/CTR/2024-25
Open Tender
Civil Works - Others
Item Rate
180 days
LSGD SUB DIVISION, CHITTUR BP
Please refer Tender documents.
8 documents required · 8 mandatory
₹860
Yes
₹9,713
Yes
15 Jan 2025
28 Nov 2024
9 Dec 2024
28 Nov 2024
6 Dec 2024
28 Nov 2024
Amount
DWSS work
OD94085/2024-2025:Bore well point investigation and marking etc.
OD94086/2024-2025:Digging bore well 150 mm dia including all hire charges of machienery and equipments, all laboure chaerges etc. Complete
OD94087/2024-2025:Yield test for water yield including all hire charges and transportation of vehicle and machienery and all other laboure charges etc.
OD94088/2024-2025:Supplying, assembling, lowering and fixing in vertical position in bore well, PVC 180mm 6 Kg/cm2 well casing pipe of required dia, conforming to IS : 4985:2000, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.
OD194782/2024-2025:Supplying and fixing 3 phase submerssible motor and pump with suitable head with 50 mm dia UPVC pipe, 4 mm2 cable, Plastic rope ,Clamp,non-return valve all materials cost and all labour charges etc. complete
OD94093/2024-2025:Supply and errect readymade ferrocement pump house of size 1.50*1.50*2.10m with following specification. RCC post shall be fixed in PCC 1:3:6 of size 45*45*45cm.Foundation alround with solid block masonry with CM 1:6 of 30*40cm ,size ferrocement wall of 1.50m*2.10m of thickness 25mm,ferrocement triangular type roof made of ferrocement slab of thickness 25mm,MsS door of size 75*210cm with 1mm thick MS sheet and suitable GI frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangements and a pad lock of 5 lever,MS ventilator of 60*45cm.Flooring with CC 1:4:8 75mm thick and plastered over 12mm thick cement plaster 1:4 and neat cement flushing coat and all wall surface and roof shall be painted with two coats of exterior emulsion paint over coat of primer.
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
50.18.8.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
50.18.8.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
50.18.9.5.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2
OD195982/2024-2025:Providing and fixing 4 mm2 cable for D W S 2HP submersible motor beyond 72 m depth from ground level power point by Electrician ,helper and all material cos complete as per direction of Engineer-in-Charge
OD196087/2024-2025:Supplying and fixing 50 mm dia U P V C I S I good quality ,erection, all materials and all all labour charges etc.complete as per the direction of site incharge
50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
PRASOOL P (BID ID -2005693)
Bidder Name
KIRAN K
PRASOOL P
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1115020.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .