SPECIAL REPAIR TO BLDG NO 1251A 1251C AND 1251D OR MESS OF CORPS SIG REGT IN ARMY AREA JODHPUR (9075/E8)

Amount

Note:- All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) including rubbish of the material outside MD Land, complete all as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in flooring,path, sub foundation etc., complete all as specified and as directed.

M&L 50mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection and like laid in alternate bays, including filling of Joints with bitumen fillers, without using extra cement, complete all as specified and as directed.

S&F machine made precast cement concrete blocks (interlocking pavers) any shape & size confirming to IS-15658-2006) of 60mm thick M-35 Grade with 6mm top layers of ante abrasive rubberised material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

Providing and laying at or near gound level, Factory made, Kerb stone of M-25 Grade Cement Concrete in position to the required line level and Cunvature jointed with Cement Mortar 1:3, including making Joints with or without grooves, including making drainage opening, complete all as specified and as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed.

M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.

M&L for squared rubble, walling Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

All as per item No. 9 above but except stones, complete all as specified and as directed.

M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed.

Extra over squared rubble stone walling, Jodhpur type, regular course, for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as directed.

M&L for 25mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in flooring and like, complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 surface finished even & rough to recievr tiling/floor finish, complete all as specified and as directed.

M&L for non-skid coloured ceremic tiles (premium quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Somany/ Kajaria/ Johnson

All as per item No. 16 above but skriting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L non skid ceramic colour joint free tiles (premium quality) 6 to 7 mm thick of size area exc 0.11 Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and as directed. Make : Somany/ Kajaria/ Johnson

M&L for glazed colour ceramic tiles (premium quality) of size 300x450x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete (Highlighter pattern), complete all as specified and as directed. Make : Somany/ Kajaria/ Johnson

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed, complete all as directed.

M&L 18 to 20 mm thick machine cut Kota stone slab flooring ,cooking plate from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 15 mm thick screed bed in cement mortor 1:4, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing grinding and polishing including 10 mm thick rendering in cement mortor 1:4, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing grinding and polishing, complete all as specified and as directed.

M&L 18 to 20 mm thick, machine cut, one side polished black granite in kitchen plate form, set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc., complete all as directed.

M&L for 15mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair without using extra cement etc., complete all as specified and as directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.

M&L Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry, Jodhpur type, regular course in CM 1:3, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces on wall and applying one coat of wall putty 3mm thick with fair finished and even surface and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade, over two coat of birla white putty 3mm each layer on plastered surface, complete all as specified and as directed.

M&L three coats of white wash on newly plastered surface of wall including preparation of surfaces complete all as specified and directed..

M&L three coats of white wash on newly plastered surface of ceiling including preparation of surfaces, complete all as specified and as directed.

M&L one coat of white wash on old surface of wall, complete all as specified and as directed.

M&L one coat of white wash on old surface of ceiling, complete all as specified and as directed.

M&L two coats of cement base paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk white of surfaces, complete all as specified and as directed.

M&L one coat of cement base paint on old surface including preparation, complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer, including preparation of surfaces, complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer, including preparation of surfaces, complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame, complete all as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each, complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm re-fixing in the same opening after necessary repair like easing etc., complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

M&L for mild steel framed work as in brackets etc for coller stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a), complete all as specified and as directed.

S&F 35mm thick, Flush shutters, solid core construction, with block board core and plywood face panels,with liminated both face commercial type on both sides, complete all as specified and as directed.

S&F of factory made solid panel, PVC door shutter, 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.

Taking down steel window/ventilator, complete all as directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and as directed by Engr-in-Charge

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening), complete all as specified and as directed by Engr-in-Charge

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.

S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.

S&F of aluminium anodized,tower bolt 200 mm long, complete all as specified and as directed.

S&F aluminium anodised handle extruded section of size 150mm long, complete all as specified and as directed.

S&F of aluminium alloy anodised sliding door bolt with hasp and staple (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.

S&F of stainless steel butt hinges 100 mm size, complete all as specified and as directed.

S&F of mild steel butt hinges 100 mm size, complete all as specified and as directed.

S&F 100mm size single action door spring hinge, complete all as specified and as directed.

S&F floor door stopper of alluminium alloy body and tongue anodised with hard drawn steel spring 140mm long, complete all as specified and as directed.

S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty, complete all as specified and as directed.

S&F for 3 mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fittings on steel/ wooden surface, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hold fast iron fixing,coping, chamfered edges including necessary form work, complete all as specified and as directed.

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary fitting, complete all as specified and as directed.

S&F stainless steel decorative 25mm curtain rod with fixing brackets, SS knob fancy typeetc as in repairs, complete all as specified and as directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete all as specified and as directed. Make : Prayag/ Polytuff

S&F in repair soap dish of PTMT fixed with screws, complete all as specified and as directed. Make : Prayag/ Polytuff

S&F in repair PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make, complete all as specified and as directed. Make : Prayag/ Polytuff

S&F in repair MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Make : Bluestar/ Jayna

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc., complete all as specified and as directed. Make : Parryware/ Cera/ Hindware

S&F in repair Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe, MS brackets, complete all as specified and as directed. Make : Parryware/ Cera/ Hindware

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp, complete all as specified and as directed by Engineer-in-Charge

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm, complete all as specified and as directed.

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm, complete all as specified and as directed.

All as per item No.85 above but fixed in wall, complete all as specified and as directed.

S&F PVC (SWR) branch pieces single socketed 'Y' equal or unequal 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

S&F 75 mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

S&F 110mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

S&F in repair chromium plated 15mm dia pillar cock long neck with aerator, complete all as specified and as directed. Make : Jaquar Cat No. CON-021KN or equvalent in Kohler

S&F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, complete all as specified and as directed.

S&F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange, complete all as specified and as directed. Make : Jaquar FUS-29053 or equvalent in Kohler

S&F as in repairs 15 mm dia two way angular stop cock with chromium plated long thread with flange, complete all as specified and as directed. Make : Jaquar

S&F as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type), complete all as specified and as directed. Make : Jaquar Cat No. QQT-7053 or equivalent in Kohler

S&F as in repairs of 15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe, complete all as specified and as directed. Make : Jaquar Cat No. CON-107KN or equvalent in Kohler

S&F low level flusing cistern PVC 10 ltrs capacity with float valves ((ISI Marked)) white with inlet ball valve including float and includign PVC connection, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

Dismantling water tanks of capacity exc 250 ltrs but.n.exc 500 ltrs and removing to store, complete all as directed.

S&F rotational moulded polythene water storage tanks 500Ltr cap, triple layer (white) (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I including tank led cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex/ Polytuff

S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm, complete all as directed.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,and cupboard shutter all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc., complete all as specified and as directed.

S&F Auto hinges, stainless steel, complete assembly, complete all as specified and as directed. Make : Hittech

Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide, complete all as specified and as directed.

S&F '0' degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample, complete all as specified and as directed. Make : Hittech

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters, complete all as specified and as directed.

S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers, complete all as specified and as directed.

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved sample, complete all as specified and as directed. Make : Hittech

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers, complete all as specified and as directed. Make : Hittech

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil, complete all as specified and as directed by Engineer-in-charge Make : Hittech

M&L 50mm thick PCC (1:2:4)Type B-1 (using 20 mm graded crushed stone aggregate) for water tank plinth and like, complete all as specified and as directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise specifically provided for, including rubbish of the material outside MD Land, complete all as directed.

M&L for Providing precast RCC 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) as in cover slab for man hloes set in CM 1:4, complete all as specified and as directed.

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm, complete all as specified and as directed.

"Supply only" Integral water proofing compund (ISI Marked), complete all as specified and as directed.

Taking down or up steel tubing and connections including cleaning for refixing or removal to store, complete all as directed. (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and as directed. (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

S&F of GI water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc and rubbis of the material outside MD Land., complete all as specified and as directed.

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces, complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.

M&L RCC design mix M-25 (using 20 mm graded crushed stone aggregate) as in slab supported on wall, roof slab, chijja and in shelve etc., complete all as specified and as directed.

M&L RCC design mix M-25 (using 20 mm graded crushed stone aggregate) as in beam, roof beam, cantilevers, lintel beam, etc., complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

S&F TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

S&F TMT bar 5 dia and over upto and including 10 mm dia as in stirrups spacers and bindus binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

M&L for roof treatment in the following stages, complete all as specified and as directed. :- (a) First Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 2.25Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm

Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 and old surface steel paiting etc., complete all as specified and as directed by Engr-in-Charge.

E/M WORK:- Taking down carefully copper/aluminium point wiring for light, fan, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc., complete all as specified and as directed.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, (ISI Marked) (class V conductor), in and including PVC concealed conduit (MMS), (ISI Marked) not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover ((ISI Marked) hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed:- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch, complete all as specified and as directed.

(c) One socket outlet 3 pin 6 Amps on same board, complete all as specified and as directed.

(d) One socket outlet 3 pin 6 Amp on independent board, complete all as specified and as directed.

All as per item No. 141 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board, complete all as specified and as directed.

S&F switch flush type single pole one way 6 Amp (ISI Marked), complete all as specified and as directed.

S&F switch flush type single pole one way 16 Amp (ISI Marked), complete all as specified and as directed.

S&F socket out let, 5 pin, 6 Amp Flush type, complete all as specified and as directed.

S&F socket out let, 6 pin,16 Amp Flush type. (ISI Marked), complete all as specified and as directed.

S&F socketed stepped type electonic fan regulator flush type, (ISI Marked), complete all as specified and as directed.

S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

"Fixing only" LED light fitting 1 X 10/18/20/22 watt (4/2 feet) complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and as directed. Note : Item issued under Sch 'B'

"Fixing only" Bldg security LED Light Luminaire of 25/45 Watts any make any size including GI pipe medium grade 40 mm dia bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps (ISI Marked), complete all as specified and as directed.

Fixing and hanging only ceiling fan/ Exhaust fan and connectiong up includisng provison of cable from ceiling rose or connector to fan, complete all as specified and as directed.

M&L in repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated FRLS and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length, complete all as specified and as directed.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, complete all as specified and as directed. Note : Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make;-Legrand/ ABB/ Schneider

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way, complete all as specified and as directed. Note : Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface. Make :Legrand/ ABB/ Schneider

S&F MCB Single pole 5 to 30 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make;-Legrand/ ABB/ Schneider

S&F MCB Double pole RCBO 40 Amp, 100 KA, (ISI Marked), complete all as specified and as directed. Make;-Legrand/ ABB/ Schneider

S&F MCB SPN 63 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make;-Legrand/ ABB/ Schneider

S&F MCB T PN 63 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make;-Legrand/ ABB/ Schneider

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed. Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 16 sqmm 4 core in service connection, complete all as specified and as directed. Make : Polycab/ Havells/ Finolex

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

SURESH TRADERS