Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹9.0 L+₹14,161.75 (1.60%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹9.1 L+₹22,143.50 (2.50%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹9.1 L+₹27,474.61 (3.10%)Rejected-Finance BHATI ABHOYNAGAR WEST VIVEKANANDA CLUB ROAD NEAR HOUSE OF DOCTOR GOURISHANKAR CHAKRABORTY P O AGARTALA TRIPURA WEST PIN 799001 | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹9.1 L+₹29,243.69 (3.30%)Rejected-Finance ABHAYNAGAR JAGATPUR PO ABHAYNAGAR AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹8.9 L
EMD Value
₹17,720
Closing Date
18 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF 01 X STORE ROOM FOR CONSV AND OFFICE STORES IN STN HQ AT MIL STN AGARTALA
2023_MES_610215_1
8450/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹17,720
Yes
22 Sept 2023
28 Jul 2023
21 Aug 2023
28 Jul 2023
18 Aug 2023
11 Aug 2023
Amount
Schedule'A' Part-I: B&R works
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil
M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken bricks.
M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate
M & L Brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.
Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point
M&L for M-20,Nominal mix 20 mm aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat
M&L RCC M-20 Nominal mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts
M & L Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.
M&L RCC M-20 Nominal mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat
M&L RCC M-20 Nominal mix using 20 mm graded aggregate in Chajjas
M&L Formwork to chullah hoods, chajjas, troughs & similar items including edges Fair finished surfaces of concrete flat
M&L RCC M-20 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for TMT bars 10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per item ser No. 18 but as in stirrups, spacers and binder, 8mm dia TMT bar
M&L for Sand filling under floors or in foundation including watering & consolidation
M&L 100 mm thick PCC type D-2 1:4:8 ( 40mm graded stone aggt) in sub base of floor.
M&L for 40mm thick PCC (1:2:4)type B1 20 mm graded stone aggregate fair and finish with using extra cement complete all as specified and directed.
M&L Machine cut kota stone slabs 20-25 mm thick of size 550 x 550mm laid over 20mm thick screed bed in cm 1 : 3 with cement slurry @ 4 kg/sqm jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing to achieve mirror/granite finish
M& L Providing cement concrete in Type B0 1:2:4 (12.5 mm graded stone aggregate) as in copings, water throughs and the like including weathering, slightly rounded or chamfered angles andf throating complete all as spcifiecd
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to receive th tiles complete as specified
M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed approved by Engr-in-Charge complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type B-2 ( 40mm graded aggregate) thick as in Path & plinth protection & finishing the surface even & fair whtiout using extra cement complete all as specified and directed.
M & L 10mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:4 to be finished fair and even with out using extra cement.
M&L for external rendering 15 mm thick in in CM 1:4 mixed with WPC @2% by weight of cementor a sper mfg instructions on brick work or concrete surfaces of wall and finished even andsmoothcomplete all as specified and directed. Note-WPC shall be measured and paid seperately.
Supply only Liquid water proofing compound
M & L two coat of white wash on walls including preparation of new surfaces
M & L two coats of cement based paint over alkaline primer as per manufacturer instruction on external surfaces of walls and preparation of new plastered surface complete all as speified.
S&F Rolled Steel Sections as in tubular trusses etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
S&F MS steel Hollow section Square/rectangular as in purlins, rail etc etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed.
M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed.
S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded and making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.)
S&F of 4mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation complete all as specified and as directed
M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed.
M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed.
Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome
M & L for PCC type C-1 (1:3:6) using 20mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frame incl necessary form work complete all as specified.
S&F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified
S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed.
S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F of 200 mm long anodised barrel tower bolt of extruded section and as directed.
Schedule'A' Part-I: E&M works
Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos.1 to 4: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be included in the qouted rate
All as per item No 51 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.
All as per item No 51 above but for one 3/5 pin 6 Amps socket outlet on the independent board.
Material and labour for point wiring (Concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed.
Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed.
Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed.
Material and labour for switch socket combination 5 Pin, 6 Amps flush type ISI marked complete all as specified and as directed
Materials and labour for socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.
Supply & fixing MCB DB (Double door) SPN, 8 way , 200 A rated IP-43,IK-09, sheet steel with bus bar, din rail, neutral link and earth bar including taking down old DB with fitting & fixtures all as specified and directed.
Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.
Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 5 of SSR Part-I.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed
Supply, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 10 sqmm x 2core,1100 Volt grade, laid in trenches / surface / wall / roof / pole / through pipe , including taking dwn old cable compleate all as specified and as directed Note :- (i) Pipe and bricks for cable protection and sand cushioning shall be measured and paid separately as per site .
Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed. Note:- Punned depth shall only be measured and paid.
S & F bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed.
Cutting hard standing / road for laying of cable / protection pipe complete all as specified and as directed.
Supply and lay GI pipe 50 mm bore (dia) light grade in trenches/road/surface/pole/wall crossing for protection of cable with necessary fittings as required complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D-2 (using 40mm graded aggregate) for filling and making good of disturbed surfaces of road/hard standing etc complete all as specified and as directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
M/S New Saha Enterprise
M/S SANKAR GOPE
SUMAN DEB
M/S SWAPAN DEBNATH
M/s Amrit Gope
M/S UTTAM GANGULY ENTERPRISE
M/S PRITAM ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .