Construction of Toilet and Drinking Water Work (Pipe Line with Water storage Tank and submersible set) in Anganbari Center at Kharmo under Govindpur Block Distt. Dhanbad

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per. Specification and direction of E/I (Vide classification of Soil item _B)

Filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per buy lading specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75B one Brick flat soling as per building specification and direction of E/I

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work up to plinth level: 1:2:4(1cement:2 coarse sand:3 graded stone aggregate)

Reinforced cement concrete work in beams , suspended floors, roofs having slope up to 15 degree landings, balconies , shelves, chajjas , lintels , bands , plain window sills , staircases and spiral stair cases above plinth level up to floor five level , excluding the cost of centering , shuttering finishing and reinforcement , with 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and Shutering including strutting propping etc.and remove all

Suspended floors roofs landing balconies and access platform

providing designation 75 B brick work in c.m (1:6)in foundation and plinth as per building specification and direction of E/I

Providing 50mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved as per building specification and direction of E/I

Providing designation 75 B Brick work in C.M (1:6) in superstructure as per building specification and direction of E/I

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including as per building specification and direction of E/I

Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL)

Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I

Providing 6mm. Thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 as per building specification and direction of E/I

Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I

Providing two coat snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper. Scaffolding, curing and taxes all complete as pr building specification and direction of E/I

Providing 50mm thick first class patent stone flooring (1:2:4) with stone chips in two layers bottom layer 19mm thick (1:2:4) with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thick (1:2) with 6mm down stone chips. In panels including cost of curing finishing the surface smooth by rubbing with carborndum stone direction of E/I.

Supplying fitting and fixing M.S grill made of 20x60mm M.S. flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site hoisting as per building specification and direction of E/I

Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface all complete as per building specification and direction of E/I.

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.

(vi) 15 mm dia brass bib cock(weight not less than 300gms)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL)

Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia

Earth work In excavation for laying of different sizes of pipes disposal of excavated earth with Initlal lif as per specification and direction of E/ in soll Item-B

Sunplying tools and making connection of new GI distribution Branch 15mm dia to 50 mm dla Gl Tec Including cutting of pipes at two places and threading their ends with Idlong screw SGI Nipple.

Supplying for Polythene structure tank capacity 1000 Ltr.

Providing supply 15mm dia Gl pipe in excavated area & fitting and fixing of in wall from storage tank and rising main and delivering maln.

Supplying tools and making hole in polyethyline structure tank with 15mm dia union socket, nipple and Jem Nut

Back filling in foundation trench excavated 85% of Item no. 1

Supplying fitting & fixing of 15mm dia push cock

Cost of 15mm dia GI Plain Socket

Cost of 15mm dia GI Elbow

Construction of B/M platform for installation of polythyline store Tank.

Providing PCC (1:2:4) M20 top surface Area of B/M Platform

Providing Plastering with Punning for Platform

Supplying all materials, labours and equipment's including 125mm dia G.I. Cap and fitting and fixing the G.I. Cap over the casing of 125mm dia T/W properly and taking out as per direction of E/I. (The cap will be property of contractor)

Supplying all tools, equipment’s and labours and lowering 32mm dia medium quality G.I. pipe in the drilling bore of tube well etc. all complete job as per direction of E/I.

Cost of 32 mm dia medium class GI pipes in 3 Mtrs lengths screwed at both ends with seamless socket as per IS:1239(Part 01) including all taxes carriage to work site and contractor's profit etc. all complete job.

Supplying and commissionig of submersible pump set of reputed KSB/tTexmo make ISI, ISO 9001 marked or having ISO 9001-2000 submersible motor pump for HYDT & head of 100.00m having discharge 4000 l/hour and lowering mm dia PVC submersible schedule 80 pipe & 2.5 sq.mm size finolex copper cable about 80.00 m with main switch 32Amp & panel board sonsisting voltmeter ammeter, on/off switch HRC fuse unit and lighting arrangement, adobter, rope with all complete job as oer specification and direction of E/I 1.5 HP

Supply fitting and fixing of standered make starter pannel board with arrangement of all necessary protection including all taxes royality etc. all complete job as per direction of E/I D.O.L starter 5 TO 10 hp

Supplying fitting and fizing 3 crore 4 sqmm flat copper submemersible cable Finolex/Hevels make including all taxes royality etc. al complete job as per direction of E/I

Sand Lead 15 Km

Brick Lead 10 Km

Stone Chips Lead 20 Km

Cement + rod Lead 10 Km

Goods & Service Tax (G.S.T.) -

Labour Cess -

Please Enable Macros to View BoQ information