DEPOSIT- Kallayichira- Rejuvination of Kallayichira in Kolazhi Gramapanchayath mechanical works - (Fabrication Painting and erection of 4 Nos of shutters and its hoisting arrangements)- General Mechanical Work

Amount

Supply fabrication and erection of Embedded Parts

OD21350/2024-2025:Supply of MS plate confirming to IS 2062 Grade B including cost of conveyance charges.

OD21351/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21352/2024-2025:Supply of MS round bar including cost of conveyance charges

85.108:Fabrication , erection and commissioning of Structural Steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charge etc complete but exculding cost of materials already supplied

OD21353/2024-2025:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Supply fabrication and erection of Gate

OD21339/2024-2025:Supply of MS plate confirming to IS 2062 Grade B including cost of conveyance charges.

OD21340/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21341/2024-2025:Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.119:Supplying and fixing cast steel thrust roller assembly having 250mm Dia, 50mm tread width, SS(304) shaft and 22313E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

Supply fabrication and erection of Hoisting Bridge

OD21343/2024-2025:Supply of MS plate confirming to IS 2062 Grade B including cost of conveyance charges.

OD21344/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21345/2024-2025:Supply of MS round bar including cost of conveyance charges

85.124:Fabrication and supply of Hoisting bride unit in structural steel confirming to IS2062 Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc

85.103:Supply of MS checquered plates including cost of conveyance charges

OD23571/2024-2025:Providing EN-8 screw rod 7.5 tonne capacity 4.00 lift screw hoist having one number of EN-8 screw shaft having lifting speed of around 5.00cm/min for 24 rpm of hand operation including cost of all material ,labour, hire charges and conveyances .1 m screw rod dia 67mm with single start square thread with head pitch of 12.7 mm root dia 62.3 mm EN-8 shaft

OD23573/2024-2025:Providing of Double worm and pinion having a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials, labour, hire charges and conveyance.

85.136:Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD21348/2024-2025:Supply of 32 mm G I pipe

OD22249/2024-2025:Supply of Bolts and nut up to 300 mm length

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD21349/2024-2025:Trail run the shutters including cost of all materials Labour etc complete.

Preparing design and drawing of shutter, embedded parts, hoisting mechanism, hoist bridge etc.

OD29918/2024-2025:Preparing design and drawing of shutter, embedded parts, hoisting mechanism, hoist bridge etc. as per IS 4622 and as per standard specifications and submitting hard & soft copies of all GA, fabrication and detail drawings.

P.Damodaran, G.R.Industries (BID ID -2140257)

Bidder Name

Kinanath V P

P.Damodaran, G.R.Industries