NPJ/SBD/02/2021-22

Amount

Earth work in excavation (As per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead lift as per specification and direction of engineer-in-charge.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

DI PIPE: Providing and supplyinng ISI mark centrifugally cast(spun) Ductile Iron pipes of 100mm and above all diameter for water works with socket and spigot ends confirming to IS:8349/2000 in standard working lengths of 4.5,5.5,6.0 m for cloassification K-7 and K-9 suitable for push on joint (Rubber Gasket D jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating Rate are ex factory, excluding transportation, taxes and duties, but includng contractor's profit & overhead charges etc. As per WPI Oct 2020 K-9 200mm

K-7 150mm-REPLACEMENT

Supplying labours, tools, tackles, lubricants etc, for laying and jointing C.I.S/S tyton pipes (class LA)/D.I. pipe in trenches supplyng rubber gasket(rubber gaskets confirming to I.S.S - 5382- 1969) and making gasket joints including providing night guard, barrier and red light to safe guard against accident all complete...... direction of E/I K-9 200mm

K-7 150mm-REPLACEMENT

Labour charge for one cutting of cast iron/D.I. and specials including supplying necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I K-9 200mm

Providing and supplying ISI standard D.I. specials & fitting with sealed rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes complete as per IS-9523 class-K-12 (ex facory) inspection charge transportation, including CP

Earthwork in backfilling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of engineer-in-charge

Carting of following sizes of pipes and special from departmental store to site for work - lead 380km K-9 200mm

K-7 150mm-REPLACEMENT

Supplying labour and tools for fixing C.I. sluice valce in trenches with a pair of C.I. tail piece including making lead caulked joints and flanged joints as per I.S.S. Specification, including supplying all jointing materials….. Direction of E/I 150mm dia SI valve

100mm dia SI valve

Supplying materials and labour for construction of 600X600X90 mm stop cock chamber of brick masonary with 125mm thick brickwork of designation 75b in cement mortar(1:6) with 12 mm thick cement plaster in cm(1:6) on inside only having 50mm thick R.C.C. cover having 12mm dia lifting rings, 2 nos stop cock chamber will rest over 80mm thick p.c.c. (1:3:6) over one brick flat soling, including cost of earthwork, all complete job, as per approved design, specifications and direction of E/I

Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C. or H.D.P.E. or A.C. pressure pipe upto 60m head of water all complete as per specification and direction of E/I (water to be supplied free of cost departmentally). 100mm

Plain/Reinforced concrete in open foundation as per drawing and technical specification. - M20 (Using concrete mixer)

Carriage of materials from kiln site or quarry site to work site including loading, uploading, transportation, etc all complete. Stone Chips-65km lead

Sand-35km lead

Cement-3km lead

Dismantling R.C.C work including stacking serviceable materials in sountable stacks within 15km lead and disposal of unserviceable materials with leads all complete as per direction of E/I

Dismantling Brick work including stacking serviceable materials in sountable stacks within 15km lead and disposal of unserviceable materials with leads all complete as per direction of E/I

Taking down old door and window shutters including stacking serviceable materials with 15m-lead and disposal of unserviceable materials with leads all complete as per direction of E/I

Taking down chaukhats in doors including stacking serviceable materials with 15m-lead and disposal of unserviceable materials with leads all complete as per direction of E/I

Taking down chaukhats in windows and collapsible gate including stacking serviceable materials with 15m-lead and disposal of unserviceable materials with leads all complete as per direction of E/I

Dismantling patent stone floor including stacking serviceable materials in sountable stacks within 15km lead and disposal of unserviceable materials with leads all complete as per direction of E/I

Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:4) in Foundation and plinth with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Plain/Reinforced concrete in open foundation as per drawing and technical specification. - M20 (Using concrete mixer)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

WOOD WORK Supplying, fitting and fixing good quality, well dressed and well seasoned Yellow meranti wood work in choukhat in doors, windows, skylights, fanlights and C/W celetial window openings, includingwedge over all clampscomplete includingapplicationof two coatsof wood preservativeof approved quality on the surface bbutting walls and lintels all completeas per building specificationand direction of E/I

Supplying, fitting and fixing 35mm thick good quality, well dressed and well seasoned sal wood fully paneled shutters in windows with 20mm thick panels with oxidized iron fittings such as hinges, sliding door, bolts, tower bolts, hand lines of rigs, hook and eyes, cleats, sand blocks ap per schedule, taxes and royalty all complete as per building specification and direction of E/I

Supplying, fitting and fixing 32mm thick good quality, well dressed and well seasoned sal wood fully paneled shutters in windows with 20mm thick panels with oxidized iron fittings such as hinges, sliding door, bolts, tower bolts, hand lines of rigs, hook and eyes, cleats, sand blocks ap per schedule, taxes and royalty all complete as per building specification and direction of E/I

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Plain/Reinforced concrete in open foundation as per drawing and technical specification. - M20 (Using concrete mixer)

Plain/Reinforced cement concrete in substructure complete as per drawing and technical specifications RCC GRADE-M20 Height upto 5m, Using concrete mixer

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete

Providing and laying 6mm pre case white glazed tiles in wall over 12mm cement mortar(1:3) and jointed with gray cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over wooden surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing one coat of painting the exposed C.I/D/F pipe with ready mixed paint of approved shade and make over steel surface including cleaning the surface toughly, scafolding and taxes all complete as per building specification and direction of E/I

Supplying all materials, labours for painting railing old G.I. pipe and fittings with one coat of approved aluminium paint over priming coat of red oxide all complete as per building specification and direction of E/I

Supplying, fitting and fixing vitreous white glazed earthen ware I-W-C of perry Hindustan or any other I-S-S approved make with 100mm H-C-I-'P' TRAP (1:5) litres C-I- pull and let go flushing catering of names or other I-S-S- equivalent make, complete with all fittings, C-I- names or C-C- brackets 32 alkalthenae P-V-C- telescopic flush, pipe about 2m long with one brass coupling and clamps G-I- chain and pull including supplying and fixing a pair or vitreous white glazed earth ware footrest to be fixed in floor 15mm C-I- body brass spindle stole cock of weight not less than 50gms 15mm P-V-C- connection pipe 450mm- Long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc-all complete as per specification and direction of E/I

Supplyng. Fitting and placing uncoated HYSD bar reinforcement in super structure as per drawing and technical specifications.

Bricks-18km lead

Stone Chips-65km lead

Sand-8km lead

Cement-3km lead

M.S. Rod-3km lead

Priting new letter and figure of any shade with synthetic enamel aint or any other approved colour to given as even shade S.O.R. R.C.D. 8.3.1 page no-123 specified given below - a0 base colour for whole civil structure i) Colour model-RGB red-23, Green-55, Blue-94, transparency-42%, ii) Border colour for whole civil structure Colour model-RBG red-23, green-55, Blue-94, Transparency 42% iii) Text colour model RBG Red-204, Blue- Transparency-0 Hindi(mattras, comms, and the like not to be measured and paid for half letter shall be counted as half) ESR 1 PHED Campus

ESR 2 Pandeydih

Arrangement of all materials, bullies, bamboo, wire, nails, coconut string etc all complete and labour and making scaffolding for doing snowcem work of one lakh gallon capacity ESR ESR 1 PHED Campus

ESR 2 Pandeydih

Supplying, fitting and fixing water level indicator made of 30cm wide 6050m high M.S. chanel with M.S. sheet fixed both side and fixed with M.S. clamp on suitable place of reservoirs at Jamtara water supply scheme tower including supplying suitable thread and brass ball of 60cm dia with providing 10mm dia M.S. bar cage with legs fixed in water tower tank for easy movement of ball, scale only marked in cm and meter with black, white and red colours so that it can easily show the actual inside level of water in sump and reservoirs including painting the chanel, clamp pully within scaffolding of all materials, carriage etc all complete as per building specification and direction of E/I ESR 1 PHED Campus

ESR 2 Pandeydih

Providing all laboured tools and materials for cleaning, washing water Tower inside including wire brush, sting for rubbing screeping with iron brush and coconut bunch and washing with beaching powder and water and disposing the rubbish from the elevated water reservoir all complete job as per buuilding specification. ESR 1 PHED Campus

ESR 2 Pandeydih

Provision for electrification work of building

Earth Work in excavation in Foundation Trenches in Ordinary soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I

Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

P.C.C. 1:3:6 in foundation (plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal mix size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Plain/reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC M20 Using Concrete Mixer

Furnishing and placing reinforced/prestressed cement concrete in super-structure as oer drawing and technical specification RCC M20 Using Concrete Mixer

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts

Supplyng. Fitting and placing uncoated HYSD bar reinforcement in super structure as per drawing and technical specifications.

Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

SAND-30KM

CEMENT-03KM

STONE CHIPS- 65 KM

BRICKS-18 KM

STEEL - 3KM

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.(75MM THK)

Plain cement concrete(1:3:6) nominal mx in foundation with crushed stone agreegate 40mm nominal size, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Plain/Reinforced concrete in open foundation as per drawing and technical specification. - M20 (Using concrete mixer)

Supplyng. Fitting and placing uncoated HYSD bar reinforcement in super structure as per drawing and technical specifications.

SAND-35KM

CEMENT-03KM

STONE CHIPS- 65 KM

BRICKS-18 KM

STEEL - 3KM

M/S RANG BAHADUR SINGH