Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.5 L
EMD Value
₹3,100
Closing Date
21 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE
Executive Engineer JS Division Baggi Distt. Mandi H.P.
as per BOQ
2026_HPIPH_145488_1
EE-JSD-BGI-TA-Tender/2026- 18534-84 dt. 9/10/2026
Open Tender
Pipe Laying Works
Item Rate
90 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹350
₹3,100
10 Oct 2026
10 Oct 2026
22 Oct 2026
10 Oct 2026
21 Oct 2026
10 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation trenches etc. (for pipes and pits upto all depths) in all kinds of soil such as pick work jumper work(for laying of pipes 3 mtrs average length for each joint),blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides,levelling of bed to correct grade stacking the excavated soil clear from the edge excavation and returing the excavated soil after laying jointing and testing of HDPE pipes in trenches in 15 cm layer i/c consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed complete job in all respect with in all leads and lifts as per direction of the Engineer-in-Charge. | 108.2 | Cum | - | - |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand: 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete job in all respect with in all leads and lifts as per direction of the Engineer-in-Charge. | 0.27 | Cum | - | - |
| 3Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain conrete work in. | |||||
| 3.01 | Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like complete job in all respect with in all leads and lifts as per direction of the Engineer-in-Charge. | 17.58 | Sqm | - | - |
| 4Providing and laying cement concrete work 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: | |||||
| 4.01 | In foundation and plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. | 0.27 | Cum | - | - |
| 4.02 | Walls (any thickness but not less than 0.10 m thickness) including attached butteresses, pillaster plinth and string courses etc. from top of foundation level upto floor two level with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. | 0.78 | Cum | - | - |
| 5 | Providing Mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level complete job in all respect with in all leads and lifts as per direction of the Engineer-in-Charge. | 46.62 | Kg. | - | - |
| 6Providing, laying, jointing, testing and carriage of HDPE pipes of various dia in trenches to required grades as per (IS: 4984-1995) PE-80, PN-4 Kg/Cm2 latest with upto date ammendments of following OD pipes, material grade and class of pipes including all fittings like end caps, collars & cut pieces etc. complete in all respect. The jointing of pipes should be done by way of butt fusion welding as per relevant IS Code and specifications complete job in all respect in all leads & lifts as per the directions and satisfaction of Engineer-in-Charge. | |||||
| 6.01 | 125mm dia PE-80, PN-4 Kg/Cm2 | 175 | Rmt | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
FORM6_1.pdf
Tender Documents • 0.60 MB
TC.pdf
Tender Documents • 0.25 MB
BOQ_216690.xls
BOQ • 2.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .