Miscellaneous Rubber Lining works at Phosphate Plant FACT-UC

Amount

Rubber lining works

Removal of old rubber from the damaged portions of equipment, vessels, tanks, ducts, on floors, pipes, etc. at various plants and at various elevations. Preparation of surface by chipping/grinding/wire brushing/Sand/shot blasting etc. as per the instructions of the Engineer-in-charge. Carryout new rubber lining using suitable rubber sheets of 2.5 mm thick in TWO layers to get a thickness of 5 mm with required adhesives, solvents, curing agents, etc. and cure it with steam / hot water to get a hardness of 60 to 70 shore A . All arrangements and materials required for rubber removal and fresh rubber lining will be under the contractor's scope.

Carryout fresh rubber lining after removing the scales, paint etc. by wire brushing / grinding / Sand/Shot blasting or by any means as directed by the Engineer-in-charge so as to get a smooth surface on newly fabricated pipes, ducts, tanks, etc. Supply of suitable rubber sheets and carry out fresh rubber lining with 2.5 mm thick rubber sheets in TWO layers (2.5 mm x 2 = 5 mm thk) with required adhesives, solvents, curing agents, etc. and curing with steam / hot water to get a hardness of 60 to 70 shore-A. All arrangements and materials required for fresh rubber lining will be under the contractor's scope.