Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 CrAdmitted-Finance | ₹14.7 Cr | L1 | Admitted-Finance |
| 2 | Rejected-Technical | - | - | Rejected-Technical Not meeting mandatory criteria for eligibility |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not meeting mandatory criteria for eligibility |
| Sl No | Description | Qty | Unit | FAIROSE A L1 |
|---|---|---|---|---|
| 1.00CIVIL WORKS | ||||
| 1.01SITE DEVELOPMENT | ||||
| 1.01Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m | ||||
| 1.01 | (a) All kinds of soil. | 12,563 | Sqm | 40 ₹5.0 L |
| 1.01 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, tress and saplings of girth up to 30cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. | 12,563 | Sqm | 20 ₹2.5 L |
| 1.01Felling trees of girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the root and stacking serviceable material and disposal of unserviceable material | ||||
| 1.01 | (a) Beyond 60 cm girth up to and including 120 cm girth | 8 | Each | 2,524 ₹20,192 |
| 1.02EARTH WORK | ||||
| 1.02Earth work in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m in all kinds of soil. | ||||
| 1.02 | (a) Lift up to 1.50m | 1,788 | Cum | 420 ₹7.5 L |
Tender Value
₹15.3 Cr
EMD Value
₹30.6 L
Closing Date
6 Dec 2023, 6:00 pmClosed
Director
NIT Calicut, NIT Campus PO, 673601
Balance infrastructure works in Mega Boys Hostel (MB-1) at NIT Calicut
2023_NITC_782317_1
Engg/D1/538/Mega Hostel-1
Open Tender
Civil Works
270 days
NIT, Calicut
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹30.6 L
Yes
4 Jan 2024
23 Nov 2023
8 Dec 2023
23 Nov 2023
6 Dec 2023
23 Nov 2023
23 Nov 2023 - 29 Nov 2023
Amount
CIVIL WORKS
SITE DEVELOPMENT
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m
(a) All kinds of soil.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, tress and saplings of girth up to 30cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Felling trees of girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the root and stacking serviceable material and disposal of unserviceable material
(a) Beyond 60 cm girth up to and including 120 cm girth
EARTH WORK
Earth work in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m in all kinds of soil.
(a) Lift up to 1.50m
(b) Lift from 1.50m - 3.00m
(c) Lift from 3.00m - 4.50m
Excavation work in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m in Hard rock by blasting.
(a) Lift up to 1.50m
(b) Lift from 1.50m - 3.00m
(c) Lift from 3.00m - 4.50m
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, yard etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering all complete as per the direction of Engineer in Charge.
Extra for carriage/ disposal of excavated earth for every additional lead of 50m or part thereof over and above the initial lead of 50m by manual labour.
Extra for carriage/ disposal of excavated earth by mechanical means above the initial lead of 50m up to 2 Kms including loading unloading transportation including leveling, ramming, consolidating, and dressing etc. of the disposed materials complete.
CONCRETE WORK
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
(a) 1:4:8 (1 Cement: 4 coarse sands: 8 graded stone aggregate 40 mm nominal size)
R.C.C. WORK
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-20 grade reinforced cement concrete. (Minimum cement content 320 kg/ m3)
For all works in roads, retaining walls, drains, culverts etc.
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-25 grade reinforced cement concrete.(minimum cement content 360 kg/ m3)
(a) All work upto plinth level
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-25 grade reinforced cement concrete. (Minimum cement content 360 kg/ m3)
I) Walls, columns, pillars, posts, and struts
(a) upto floor V level (---- m LVL)
(b) from floor V to IX level (---- m LVL)
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-20 grade reinforced cement concrete. (Minimum cement content 320 kg/ m3)
ii) Beams, plinth beams, girders, bressummers, cantilevers, suspended floor, lintels, roofs and staircases including spiral staircases, shelves etc.
(a) upto floor V level (---- m LVL)
(b) from floor V to IX level (---- m LVL)
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-25 grade reinforced cement concrete.(minimum cement content 360 kg/ m3)
ii) Beams, plinth beams, girders, bressummers, cantilevers, suspended floor, lintels, roofs and staircases including spiral staircases, shelves etc.
(a) upto floor V level (---- m LVL)
(b) from floor V to IX level (---- m LVL)
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-20 grade reinforced cement concrete. (Minimum cement content 320 kg/ m3)
iii) Sloping roof slabs, sloping sunshade slabs, coffered slabs, etc.
(a) upto floor V level (---- m LVL)
(b) from floor V to IX level (---- m LVL)
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions (as per IS 9103) to accelerate, retard Setting of concrete, improve workability without impairing strength and durability characteristics of concrete as per manufacturers specifications and as per directions of Engineer in Charge - M-25 grade reinforced cement concrete. (Minimum cement content 360 kg/ m3)
iii) Sloping roof slabs, sloping sunshade slabs, coffered slabs, etc.
(a) upto floor V level (---- m LVL)
(b) from floor V to IX level (---- m LVL)
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, and binding all complete for all heights.
(a) thermo Mechanically Treated Bars (TMT) -Fe 415
Providing and fixing precast cement concrete slabs with RCC M20 using 20 mm nominal size stone aggregates including hoisting and Setting in position with cement mortar 1:3 (1 Cement: 3 coarse sand), cost of required centering, shuttering, etc. complete.
Centering and shuttering including strutting, propping etc. at all levels and removal of form for: (material used for form work shall be Plywood or steel. Form work shall be done to correct lines, levels, and finish to get a fair finish so that plastering can be avoided)
(a) Foundations, footings, bases of columns etc. for mass concrete.
(b) Suspended floors, roofs, landings, balconies and access platform etc.
(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
(d) Columns, Pillars, Piers, Abutments, Posts and Struts.
(e) Stairs, (excluding landings) except spiral - staircases.
(f) Shelves(cast in situ)
(g) Walls
(m) Sloping slabs, sloping sunshades etc including edges.
Extra for additional height in centering, shuttering wherever required with adequate bracing, propping etc. including cost of de-shuttering & de-centring at all levels over a height of 3.5 m, for every additional height of 1 m, or part thereof (Plan area to be measured).
(a) Suspended floors, roofs, landing, beams, balconies, sloping slabs, coffered slab, etc. (Plan area to be measured).
MASONARY WORKS
Providing and constructing laterite masonry in using good quality laterite stones of standard size in cement mortar 1:5 foundation and basement, including all charges, upto plinth level
Providing and constructing laterite masonry in using good quality laterite stones of standard size in cement mortar 1:5 in superstructure, including all charges.
(a) Above plinth level upto floor V level in cement mortar 1:5(1 Cement : 5 coarse sand).
(b) From floor V level to floor IX level in cement mortar 1:5 (1 Cement : 5 coarse sand).
Brick work with bricks of class designation 50 in foundation and plinth using FPS bricks in:
(a) Cement mortar 1:6 (1 Cement : 6 coarse sand)
Brick work with bricks of class designation 50 in superstructure using FPS bricks
(a) Above plinth level upto floor V level in cement mortar 1:6 (1 Cement : 6 coarse sand).
(b) From floor V level to floor IX level in cement mortar 1:6 (1 Cement : 6 coarse sand).
Half brick masonry in superstructure with bricks of class designation 50
(a) Above plinth level upto floor V level.Cement mortar 1:4 (1 Cement : 4 coarse sand)
(b) From floor V level to floor IX level in cement mortar 1:4 (1 Cement : 4 coarse sand).
(c) Above floor IX level in cement mortar 1:4 (1 Cement : 4 coarse sand).
Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of half brick masonry
Random rubble masonry in cement mortar 1:6 with hard stone for foundation, retaining walls, drain sides, culverts, etc. at all levels including scaffolding, dressing of stones, packing interstices, leveling, providing weep holes curing etc. complete
WOOD WORK
Providing wood work in frames of doors, windows and other frames, wrought framed and fixed in position.
(a) Second Class teak wood
Providing and fixing panelled shutters for doors, including ISI marked oxidized iron butt hinges of approved make (4 nos, 125mm size) with necessary screws including panelling.
a) 35 mm thick Second Class teak wood styles and rails and with 15 mm panelling insert of Second Class teak wood
Providing and fixing panelled and glazed shutters for doors, including ISI marked oxidized iron butt hinges of approved make (4 nos, 125mm size) with necessary screws excluding panelling, which will be paid separately.
a) 35 mm thick second class teak wood shutters
Providing and fixing panelling in panelled and glazed shutters for doors (area of opening for panel inserts excluding portion inside grooves or rebates to be measured)
a) Panelling for 35 mm thick panelled and glazed shutters using second class teak wood.
Providing and fixing glazing with float glass panes 6 mm thickness in wooden doors, with necessary beadings etc. Complete as per the architectural drawings and the directions of Engineer-in-charge.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS:6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge.
a) With Stainless Steel cover plate
Providing and fixing glazed shutters for windows and ventilators using 4 mm thick glass panes, including black enamel M.S. butt hinges with necessary screws
a) 30 mm thick shutters in Second Class teak wood.
Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
Providing and fixing aluminium sliding door bolts (Aluminium Aldrop) ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
a) Single rubber stopper
Providing and fixing IS:3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc., complete.
Providing and fixing bright finished brass 100mm mortice latch and lock with 6 levers and a Pair of lever handles with necessary screws etc. complete (best make of approved quality).
Supplying and fixing 6 lever padlock with 3 keys of best quality and make approved by the Engineer in Charge / Architect including all charges.
STEEL WORK
Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position, and applying a priming coat of approved steel primer, etc. complete.
Steel work welded in built up sections or framed work including cutting hoisting, fixing in position, and applying a priming coat of approved steel primer using structural steel etc.as required.
(a) In stringers, threads, landing etc. of staircases including use of chequered plate, wherever required all complete.
(b) In gratings, frames, guard bar, grills, ladders, railings, brackets, gates & similar works.
Providing, fabricating and fixing Stainless Steel handrails for Staircases, balconies, corridors, etc. using 304 grade SS sections like round / square bars, tubes, flats, plates, etc. as per design and drawings including necessary welding, grinding, buffing and polishing of joints, cost and conveyance of all materials, labour, etc. complete.
Providing and fixing MS weld mesh 50mm x 50mm x 10guage over skylights, ventilators, opening etc., including cutting, necessary welding to MS frames, fixing in position using steel screws, necessary scaffolding etc., complete as directed by Engineer in Charge.
FLOORING WORK
Providing and laying joint less homogenous polished Vitrified tiles in different sizes with water absorption less than 1% and flexural strength not less than 30N/MM2, in all colour and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with tile joint filler of desired shade and best quality approved by the Engineer in charge / Architect etc., complete.
a) Size of Tile 600 x 600 mm with thickness 9.6-10 mm
Providing and laying joint less homogenous polished Vitrified tiles in different sizes with water absorption less than 1% and flexural strength not less than 30N/MM2, in all colour and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with tile joint filler of desired shade and best quality approved by the Engineer in charge / Architect etc., complete. for skirting, risers, dado etc.
a) Size of Tile 600 x 600 mm with thickness 9.6-10 mm
Providing and fixing 1st quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 5mm of best quality and make approved by the Engineer in Charge / Architect in all colours, shades except bergendy, bottle green, black or any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including Pointing with approved tile joint filler of matching shade complete.
Providing and laying anti-skid ceramic floor tiles 6 mm thick 300x300mm of 1st quality conforming to IS:13755 of best quality and make approved by the Engineer in Charge / Architect in approved colours, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including Pointing with approved tile joint filler of matching shade etc. complete.
Providing and fixing Granite Stone flooring over 20mm (average) thick based on cement mortar 1:4 (1 cement : 4 coarse sand) laid over and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
a) 18-20mm thick Ruby Red or Black Granite of size and colour as approved by the Engineer-in-Charge.
Providing and fixing Granite stone in skirting, treads & risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including Pointing in white cement mixed with pigment of matching shade complete.
a) 18-20mm thick Ruby or Black Granite of size and colour as approved by the Engineer-in-Charge.
Providing and fixing KOTA stone flooring over 20mm (average) thick base on cement mortar 1:4 (1 cement : 4 coarse sand) laid over and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with kota stone tiles of thickness 20 mm.
Providing and fixing KOTA stone flooring in treads of steps not exceeding 30 cm in width and risers over 12mm (average) thick base on cement mortar 1:4 (1 cement : 4 coarse sand) laid over and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with kota stone slab of thickness 20 mm.
Extra for providing edge moulding to 18 mm thick KOTA / GRANITE counters, treads, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
40 mm thick red oxide flooring under layer of 30 mm thick cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer of 10 mm thick plaster of cement red oxide mix (using 3.5 kg of red oxide of iron per 50 kg of cement) 1:3 (1 Cement : 2 coarse sand) finished with a floating coat of neat cement red oxide mix of same proportion including cement slurry and wax polishing the cured surface using grinding machine fitted with soft cloth for buffing, but excluding the cost of nosing of steps etc. complete.
FINISHING WORK
9 mm cement plaster to ceiling of mix :
(a) 1:3 (1 Cement : 3 fine sand)
12 mm cement plaster for plastering inside and outside of mix :
(a) 1:5 (1 Cement : 5 fine sand)
15mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement
Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof
Plain cement mortar bands (raised) 20mm x 12 mm thick in cm 1:4 for water cutting in sunshades, roof slab etc.
Providing and applying wall putty of approved make over interior plastered surface to prepare the surface even and smooth complete. The rate shall include necessary scaffolding at all heights
Applying one coat of cement primer of approved brand and manufacture on wall surface: The rate shall include necessary scaffolding at all heights (Interior & Exterior)
White washing with lime to give an even shade on new work (on three or more coats) for painting in ceiling. The rate shall include necessary scaffolding at all heights
Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete, as per manufacturer's specification.The rate shall include necessary scaffolding at all heights
a) Two or more coats on new work
Wall painting with exterior emulsion paint best quality and make approved by the Engineer in Charge / Architect to give an even shade:
(a) Two or more coats on new work.
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including 1 coat of priming coat, preparation of surface, etc. complete.
(a) Two or more coats on new steel work
Painting with approved quality synthetic enamel two coat over a priming coat after cleaning the surface for kerbs, center medians, guards etc. including cost conveyance of all materials, labour charges etc. complete as directed by Engineer-in-charge for roadwork
Providing and applying Melamine finish two coats on wood work after scraping and cleaning the surface, applying necessary coats of approved wood filler and sealer, grinding with sand paper to get a perfectly smooth finish, including cost and conveyance of all materials, labour, scaffolding etc. complete.
Flush Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand)
Providing and fixing of 200mm wide chicken wire mess of 24gauge at the junction of brick work and RCC work, including fixing with nails, rawl plugs etc.; before applying plaster.
ALUMINIUM & GLAZING WORK
Providing and fixing powder coated aluminium work for doors, windows, ventilators & partitions with extruded built up standard tubular and other section of approved make conforming to IS : 733 and IS : 1285, anodized transparent or dyed to approved shade according to IS: 1868. (Minimum anodic coating or grade AC 20) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling. C.P.brass/stainless steel screws, all complete as per architectural drawings and the direction of Engineer-in-charge. (Glazing and panelling to be paid for separately).
(a) For fixed portion.
(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots or sliding arrangements and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required and all fittings such as friction hinges, sliding rollers, handles, etc. complete.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. Complete as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item)
(a) With reeded or pin headed glass panes of 5 mm thickness
(b) With tinted glass panes of 5 mm thickness
Providing supplying & fixing of Structural Glazing made out of suitable aluminium sections / as per design for frames and infill of reflective coloured glass of best quality and make approved by the Engineer in Charge / Architect in approved colours with frames fabricated and installed to true line and level using HILTI / FISHER anchor fasteners and grids made to size as approved by the Engineer in Charge / Architect and fitted with reflective glass using double adhesive tapes and fixed with DOW CORNING - 995 structural bite sealant, cleaning with toluene etc complete as directed by Engineer in Charge.
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 Metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 Metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platfoMetre etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or Pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
Providing and laying water proofing treatment in sunken portion of WCs bathroom etc by applying cement slurry mixed with Amocrete of M/s structural water proofing company private limited or Tapecrete of M/s. Cico engineering service consisting of applying a) first layer of slurry cement @0.488 kg/sqm mixed with Amocrete or [email protected] kg/sqm. This layer will be allowed to air cured for 4 hours.b) Second layer of slurry of [email protected] kg/sqm. mixed with Amoctere or Tapicrete @0.126 kg/sqm. This layer will be allowed to air cured for 4 hours followed with water curing 48 hours. The rate includes the preparation of surface ,treatment and sealing of all joints.corners,junctions of pipes and masonry with polymer mixed slurry. Note: enduring /plastering as protective layer if required will be paid separately.
Providing waterproofing over the concrete surface by applying cement based two component polymer modified water proofing slurry coating (SIKA Top Seal or equivalent) after cleaning the surface free from scale, rust, grease, oil, etc. preparing the surface to be true and flat and saturated, mixing the liquid (A) and powder (B) components in the ratio 1:4 by weight, applying in two coats with an interval of 2 to 6 hrs for hardening in between and finally finishing by rubbing down with a soft, dry sponge including protecting the applied surface from direct sunlight and strong wind and curing by damp gunny bags or polythene sheeting upto 5 days etc. complete.
MISCELLANEOUS BUILDING WORK
Providing and fixing in position 25mm thick bitumen impregnated fibre board conforming to IS:1838 including cost of primer, sealing compound in expansion joints.
Providing and filling in expansion joints with two component polysulphide sealant of best quality and make approved by the Engineer in Charge / Architect, 25 mm x 20 mm, as per manufacturers specifications and as directed by Engineer In Charge.
Providing and fixing sheet covering over expansion joints with iron screws as per designed to match the colour/shade of wall treatment with aluminium fluted strip 3.15 mm thick 150 mm wide.
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Providing laying and fixing Mangalore Pattern tiles of size 320mm or nearest size of best quality and make approved by the Engineer in Charge / Architect, Set in cement mortar of mix 1:3 duly admixture for waterproofing, seating the tile snuggling fitting / bonding on soft cement mortar, cleaning top surface of tiles free of stains, laid from bottom upwards, filling gaps as applicable to get an even finish in tile colour, including cost, conveyance of all materials, scaffolding etc. complete as directed by the engineer in charge at all levels.
Providing, laying and fixing MP hip and ridge tiles its class Set in cement mortar 1:3 including finishing edged etc. as directed by engineer in charge at all levels.
Providing and fixing High Rib coloured Galvalume / Zincalume 0.50 mm TCT or equivalent steel roofing system of approved make as per standard specifications & manufacturers instructions, etc. complete as directed by Engineer in Charge.
Providing and fixing ridges suitable for High Rib coloured Galvalume / Zincalume roofing system 500 mm wide 0.50 mm TCT equivalent of approved make as per standard specifications & manufacturers instructions, etc. Complete as directed by Engineer in Charge.
Supplying & fixing half round PVC gutters 160 mm of approved make as per specifications including all the necessary fittings, fasteners, etc. complete
Supplying and fixing 10mm thick of polycarbonate multiwall sheets of best quality and make approved by the Engineer in Charge / Architect, over the frame work already erected, sheets fixed to the frame using special aluminium extrusions, including all fasteners fixtures as per site requirement, applying silicone sealant wherever necessary so as to make the roof water tight at all heights as per manufacturers Specifications and as directed by Engineer-in-Charge.
Providing and filling sunken slabs with lime concrete with graded brick aggregate 25 mm nominal size and 50% mortar comprising of 1 lime putty : 2 surkhi, after laying of the pipe lines, etc. complete.
Supplying and laying RCC Hume pipes of NP2 class conforming to IS 458 under driveway and for culverts including excavation, providing collar joints, etc. complete as directed by Engineer In Charge.
(c) 300 mm dia.
ROAD WORK
Providing and laying Pre-cast cement concrete block paved driveway including supplying 40mm thick pre-cast machine made cement concrete block of approved size, shape, shade as per manufacturers specifications. The paver blocks shall have peripheral chamfer, with average crushing strength not less than 25 N/Sq.mm as per BS6717 Part -1(1986), maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length & width and +/- 3mm on on thickness. The job includes supplying & laying a layer of 50mm thick clean course sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) for roadwork
Providing and laying Pre-cast cement concrete block paved driveway including supplying 80mm thick pre-cast machine made cement concrete block of approved size, shape, shade as per manufacturers specifications. The paver blocks shall have peripheral chamfer, with average crushing strength not less than 40 N/Sq.mm as per BS6717 Part -1(1986), maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length & width and +/- 3mm on on thickness. The job includes supplying & laying a layer of 50mm thick clean course sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately)
Extra for carriage/disposal of excavated Hard rock by mechanical means above the initial lead of 50 m upto 2 km including loading unloading transportation etc. of the disposed materials complete.
Centering,Shuttering for circular column etc.., complete
Centering, Shuttering, lintel, Elevation beam etc., complete (for Arch shuttering)
Sunken Band in outer walls
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete at all levels internal & external including necessary staging/scaffolding, etc. as per direction of Engineer- in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
Demolishing brick/laterite work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Metres lead as per direction of Engineer-in-charge.
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Metres lead as per direction of Engineer-in-charge
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Metres lead as per direction of Engineer - in- charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 Metres lead : Of area 3 sq. Metres and below
Cleaning of all interior surfaces free from dust, oil, grease, debris, malba and other unservicble materials at all floor level for handing over the site. The floor and walls to be washed mild cleaning chemicals. The rate shall include all machines, labours, materials, disposing of unserviceable materials etc… as per the direction of engineer in charge.
Dismantling, removing, Shifting and stacking of existing contractor own materials and machines (e.g., Scaffolding, loose materials laid at site MS pipes, grills, wooden door frame, shutters, steel plates, roofing sheet, tile, kota, paint, electrical accessories, polishing machine, ropes, cables and wires, fans, lights, breakers, EB accessories, temporary sheds, concrete pump, transit mixer, mini batcher, etc… not limiting above (all materials and machines) kept at various locations at site. The stack location will be at the site as directed by Engineer-in-charge. The rate shall include identifying of materials and machines, collecting the same at site, all labours, loading, unloading, transporting, and stacking of the same in leads and lifts.
Re-conditioning of existing towels reinforcement in RCC structures. The reinforcement shall be cleaned using wire brush free from debris, loose particles, etc. After cleaning of reinforcement, it shall be treated with latex based mortar and screed modifier & boning agent using brush as per the manufacturer specification. The rate shall include all necessary materials, labours, lead and all heights, scaffolding, etc. The same shall be complete as per the direction of Engineer in charge.
Removing and replacing of the damaged vitrified tile, ceramic, Ant-skid ceramic flooring/skirting at various locations at site. The base mortar also to be removed and cleaned the surface free from loose particles and disposed of the unserviceable materials. Then the vitrified tile thickness 9 to 12 mm to be laid to match the existing shade of tile flooring including the base mortar and cement grout of avg thickness of 25 mm. Clearing the tile joint using approved matching pigments. The rate shall include all materials, labours, transporting and disposing of unserviceable materials at all lead and all floor levels as directed by the Engineer in charge.
Removing and replacing of the damaged Granite/kota flooring/skirting at various locations at site. The base mortar also to be removed and cleaned the surface free from loose particles and disposed of the unserviceable materials. Then the granite/kota 20 mm thick to be laid to match the existing shade of tile flooring including the base mortar and cement grout of avg thickness of 25 mm. Clearing the joint using approved matching pigments. The rate shall include all materials, labours, transporting and disposing of unserviceable materials at all lead and all floor levels as directed by the Engineer in charge.
Polishing a granite/ kota flooring and cladding using approved floor polisher. The rate shall including rubbing to get an even level and polishing using approved chemicals at all floor levels. The rate shall include all materials, labours, machines, transporting, all lead and lifts as directed by the Engineer-in-charge.
Removing and replacing of damaged sliding wheels, lock and handles in Aluminium sliding windows at all floor levels. The rate shall inclusive of all materials, machines, labours, transporting, all lead and lifts, etc.. As directed by the Engineer-in-charge.
Removing and replacing the damaged glazing in aluminium windows/ventilator/doors using glass panes of 5 mm with all necessary fixtures for glazing at all floor levels. The rate shall include all leads, lifts, materials, transporting, etc.
a) Pin headed glass
b) Float glass/Coloured glass
Removing of damaged teak wood door frames and shutter including hold fastener and concrete at all floor levels. The damaged frames and shutter are to be stored at site as directed by the Engineer-in-charge. And other unserviceable materials are to be disposed. The rate shall includes all machines, labours, transporting, all lead and lifts as directed by Engineer in charge.
Filling the gap in between around aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. For payment purposes single side measurement only be taken. The rate shall include all required allied works.
Cleaning of external façade of building such as walls, structural glazing, windows, ventilators, cladding etc. including the cost of manpower,equipments,tools, cleaning materials,tackles,cosumables,scaffolding, safety gears etc. complete. The rates quoted shall be inclusive of all taxes, duties, transportation etc., etc.complete.The above mentioned surfaces to be cleaned properly with suitable cleaning materials with pressurized water jet which do not have any adverse effect on the facade. All the dirt should be properly removed from existing profiles while cleaning, to the satisfaction of engineer in charge.
1. Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 2.Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 3.Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect with Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
Providing and fixing Aluminium sheet of 1.5 mm thick at various locations at all levels (below Mangalore ridge/corners, etc...) as directed by Engineer in charge.
Supplying and providing 6mm thickness Acrylic Sign Board of size as provided below where ever found necessary as per the direction of the the officer in charge including cost of all materials labour charges for fixing etc. complete
a) 400 X 150 or nearest size
b) 200 X 100 or nearest size
Clearing the Expansion joints free from all loose particles from ground to top level. Chip of and remove the plaster in the expansion joint at all levels. The rate shall include all labours, machines, disposal of debris, all leads as directed by the Engineer in charge.
Providing and fixing of expanding rigid polyutherene sheets of thickness mentioned in the expansion joints and covering the surface using Aluminium Fluted strips of 3.5 mm thick size mentioned below inside and outside or floor and roof of building. Aluminium sheet shall be fixed as per the drawing. The rate shall include all labours, materials, all heights and internal and external side of building. For payment purposes single side measurement will be taken.
a) 25 mm thick 300 mm wide Aluminium sheet
b) 50 mm thick 400 mm wide Aluminium Sheet
Cleaning and painting of Mangalore tiles at roof. The roof tile to be cleaned using mild washing chemical agent with pressurized water to remove all the dirts and making good for painting. The rate shall include the replacing of damaged tiles with necessary allied works. Applying two coats of tile coat/tile guard paint prior to the 1 coat of primer on Mangalore pattern roof tiles.
Removing and replacing the Mangalore pattern tiles for water proofing works at terrace. After completion of water proofing the tile should be relayed with necessary cement mortar band to match the existing tile area. The rate shall include all materials, labours, transporting, etcc.. as directed by Engineer-in-charge.
All cracked surfaces shall be opened up in V-groove shape upto maximum of one inch and fixing PVC Nozzles in 60 cm centre to centre distance and fixing the same with suitable mortar like Dr. Fixit Polymer Mortar HB. After that packing the opened V-groove cracks with suitable Polymer Modified Mortar using Cement: Sand = 1:3 admixed with Water and Dr. Fixit Pidicrete URP @ 1 kg per 50 kg bag of Cement and prior to that, V-groove surfaces should be primed with Dr. Fixit Epoxy Bonding Agent. The PVC Nozzle shall be grouted with Cement-Water-Dr. Fixit Pidicrete AM @ 200 gm per 50 kg Bag of Cement and Dr. Fixit Pidicrete URP @ 1 kg per 50 kg Bag of Cement. After grouting, the next day, the PVC Nozzle's should be cut properly and shall be leveled with Dr. Fixit Polymer Mortar HB.
Cutting grooves of size 5 mm x 5 mm in plastered surface using diamond cutting machine and filling the grooves with bituminous mastic so as to foMetre panels of maximum area 15 sqm in the existing Brick bat coba work.
Supply and fixing of Automatic frameless sliding door by (GEZE EC DRIVE 90) and operator, modular design including internal cover with operator dimensions (H X D) not exceeding 115mm x 135mm and of length required to suit the opening size given below: Clear opening of size 1800mm X 2400mm : GEZE EC Drive 90 , compact linear sliding door automatic, with self cleaning rollers (Tested for ONE MILLION cycles). In general, the sliding door consists of Microprocessor Control unit, monitoring of closing force, automatic reverse on contact with obstruction, operator commissioning without any additional instrumentation and self-toning. Operating Modes: Continuous open, automatic operation, close.(radar motion detector with direction detection and self-monitoring, double 3D safeguard light curtain (light barrier) for convenient safeguarding of the opening width), integrated in the drive unit The operator will be provided with short circuit proof power supply unit 230 V, 50hz (power Point shall be made available at site by electrical contractor) and shall have operator activation by infrared movement detector on both sides. The max door opening & closing speed shall be 0.5m/sec.The IP rating for the same is IP 20,with an average working energy consumption of 150W.The door opening & close force shall be Rate shall include for providing 12mm thick clear toughened glass sliding shutter as per design, handling, loading and unloading, installation, power required for erection, protecting the module and glass till handing over, testing, commissioning all necessary hardware's of GEZE make or equivalent and the module to be erected with the structural supports etc. complete and all as per manufacturers specifications as directed.
Providing and fixing factory made single extruded WPC ( Wood Polymer Composite) solid door window, clerestory windows & other frames/Chowkhat of door frame size 65X125 mm also Factory made single extruded WPC solid plai white coloured board of 25 mm thick neatly fixed to the door frame with necessary accessories and hardware as required neatly complete as per the direction of Engineer-in - charge.
Providing fabricating and fixing 4 mm thick ACP cladding of approved make & shade at all heights with necessary Aluminium section sub frames of size 50mm X 25mm X 2mm thick, minimum 20 micron colour anodized finish of approved make, Supportive Ms structures as per Architectural shapes & to withstand wind pressure of 190 kg/Sqm. Sub frames, MS structures and cleats shall be field to civil structure with necessary clamps, Galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be hot dip galvanized M.S brackets and anchor fasteners. All clamps and other accessories such as fastening straps, nuts, bolts, rivets, washers, etc. other than anchor system shall be of Indian standard grade. All joints of ACP must be sealed with DOW CORNING 789 weather sealant or equivalent of approved colour. (Rate shall include providing open cell polyethylene backer rods, weather sealant etc. complete as per requirements and as directed by the Engineer in charge. The weather sealant shall be of approved or equivalent make)
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
Providing and applying ATT for the existing building 1. Treatment to wall and floor junction: Holes of 12mm dia 30 comes apart will be drilled along the inner junction of wall and floor in the entire ground floor premises. Water based chemical emulsion (250ml to 1 litre) will be injected under pressure into these holes, to create barrier against teMetreites. If the building is on stilts, holes shall be drilled along the column sides at ground level. 2. Treatment to soil under floor: On the ground floor, if the cracks are noticed because of construction joints, expansion joints or shrinkage, the soil below floor needs to be treated Holes of 12mm dia 30 cms apart will be drilled along the cracks only and water based chemical emulsion will be injected. 3. Treatment to wooden fixtures: - Holes of 12mm diameter will be drilled at the base of wooden members such as window frames, door frame inset in the flooring and water based chemical emulsion will be injected. This treatment to be done on all floors (except basement / terrace). An oil-based chemical will be sprayed on all the woodwork infested by teMetreites within the premises. 4. Treatment to teMetreite mud tubes: Visible and accessible shelter mud tubes will be removed and the infested area with water based chemical emulsion. This treatment to be done on all floors. 5. Treatment along the external perimeter of the building: Trenching or drilling holes along the external walls of the building (similar to stage of 1 mentioned above) will be carried out to create a continuous chemical barrier around the building. Note: For payment purposes the plinth area of building will be measured
Preparation of drawings, documents, liaison work, etc or getting initial/final NOC from local panchayat/municipality and other statutory agencies. (Contractor shall pay all the statutory fees initially. However, the same will be reimbursed on submission of supporting documents.)
ELECTRICAL WORKS
SITC of WATER PUMP ISOLATOR
MCB 25A TPN 10kA 'C' Curve - 1 No.
DOL starter for 5 kW motor - 1 No.
Enclosure - 1 No.
SITC of TPN DB for External lighting
BLOCK C
MCB 32A 4P 10kA - 1 No
RCCB 25A 4P 30mA - 1 No.
MCB 16A 4P 10kA - 3 No
TPN 4-Way DB suitable for above - 1 No.
Supply and fixing Cable route marker with 10x10x5cm thick G.I.Plate with inscription, bolted/welded to 35x35x6mm angle iron 60cm long and fixing the same on a concrete block of size 23x23x30cm and providing the same in ground as required.(Civil Work measured separately)
ABOVE GROUND
SITC of armoured XLPE insulated and PVC sheathed power cable of 1.1kV grade in the existing trench / pipes/ ducts / cable trays, giving terminations by supply and fixing Brass compression gland including Aluminium lugs & Gland earthing as required.
3.5X400 Sqmm
3.5X120 Sqmm
3.5CX70 Sqmm
3.5CX35 Sqmm
4CX10 Sqmm
4CX6 Sqmm
Supply and drawn following size of existing FRLS PVC insulated copper conductor, single core cable in the existing CMS/surface/recessed steel/pvc conduit as required ,wire supplied by client (Note: The rate shall include for testing (using megger device in the presence of Engineer-in-charge), removing, stacking and replacing of damaged wires with the prior approval. All complete as per the direction of Engineer in charge.
3X1.5 sqmm
3X2.5 sqmm
3x4 sqmm
3x6sqmm
LT CABLES
UNDER GROUND
SITC of 1.1kV grade armoured XLPE insulated PVC sheathed power cables with Aluminium conductor of following sizes under Ground, including excavation of earth trench of required size and depth 75cm min. from finished ground level, supply and providing protective covering with country burnt bricks laid breadth-wise, refilling the trenches in layer, making good the damages, providing terminations by supply and fixing Brass compression gland including Aluminium lugs & Gland earthing as required. (Note: The rate shall include for testing of existing cables using megger device in the presence of Engineer-in-charge before using the same. Faulted cables are to be repaired(repairing charges will be paid extra)/ removed and replaced with the prior approval of Engineer in charge..)
3.5C x 300 Sq.mm
3.5C x 240 Sq.mm
3.5C x 185 Sq.mm
3.5C x 35 Sq.mm
ABOVE GROUND
SITC of armoured XLPE insulated and PVC sheathed power cable of 1.1kV grade in the existing trench / pipes/ ducts / cable trays, giving terminations by supply and fixing Brass compression gland including Aluminium lugs & Gland earthing as required. Cable supplied by client (Note: The existing cables should be tested using megger device in the presence of Engineer-in-charge before using the same. Faulted cables to be removed and replaced by new one with the prior approval of Engineer in charge. The rate shall include for testing the cables with allied all expenses.)
3.5CX 400 sq.mm
3.5CX70 Sq.mm
3.5CX35 Sq.mm
4CX10 Sq.mm
Providing and fixing of Cable Jointing Kit of approved make. The cable sleeve to be removed by proper tools and remove the oxidation in conductor and the joining to be neat and straight without loose contact/weather proof. all complete as per the manufactures specification. Note: The rate shall include Excavation, Refilling and laying the cable in proper way or support as necessary to complete as per the direction of Engineer in charge
3.5C x 300 Sq.mm
3.5C x 240 Sq.mm
3.5C x 185 Sq.mm
3.5C x 35 Sq.mm
3.5CX 400Sq.mm
3.5CX70 Sq.mm
4CX10Sq.mm
EARTHING
SITC of Earthing with CI earth plate of size 1200mm x 1200mm x 12 mm with 50mm dia. GI pipe extending up to the middle of the plate and clamping to the plate with minimum 2 Nos. GI clamps and bolts, funnel with welded 20G GI wire mesh and supply and constructing 1000x500x600mm brick masonry chamber, plastering, with heavy duty CI cover plate having locking arrangement, CI frame painted with bitumen's paint, earth pit with yellow paint below the chamber cover, pit filled mixtures of charcoal and common salt around electrode at a distance of 15cm min., including digging of earth pit up to peMetreanent moisture level depth and back filling. The value of earth resistance should be less than 1 ohm for approval.
SITC of 25mm x 6mm Cu strip on surface/recess/ tray including supports, clamping etc. as required.
SITC of 25mm x 3mm Cu strip on surface/recess/ tray including supports, clamping etc. as required.
SITC of 10 SWG copper wire on surface / recess/ tray for loop earthing as required.
LIGHTINING PROTECTION
SITC GI tape 25x3mm thick on parapet or surface of wall for lightning conductor including porcelain/ DMC supports as required. (For horizontal run)
SITC of GI tape 25x3mm thick on parapet or surface of wall for lightning conductor including porcelain/ DMC supports as required. (For vertical run)
SITC of 25mm x 3mm Cu. strip on surface Including supports, clamping using GI strips, etc. as required for connecting to test link.
SITC of testing joint made of 25x6mm thick copper strip 125mm long with 4 Nos. tinned brass bolts, nuts, check nuts, spring washer etc. complete as required.
SITC of Earthing with GI earth pipe 2.75m long x 40 mm dia. including all accessories, and providing masonry enclosure with heavy duty CI cover plate having locking arrangement and watering pipe, etc (but without charcoal or coke and salt) complete as required as per IS : 3043. (Including Civil Work)
Supply and providing for charcoal or coke and salt for pipe earth electrode as required.
SITC of Aviation light fixtures with yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome, including supply of 2 Nos 100W incandescent lamps with all necessary accessories, as required to be mounted at the top with suitable controlling switch. (Make Bajaj BJAOL or equivalent approved make).
WIRING & ACCESSORIES
CONCEALED Point WIRING
LIGHT POINTS
SITC of Concealed Point wiring (from Switch board) including Concealed Circuit Wiring (from DB to switch board) for light Points after cutting grooves on wall/ RCC, neatly filling the grooves with cement mortar, making good thereof, etc. using following:-
3 x 1.5 Sq. mm. heavy duty PVC insulated copper conductor stranded cable (1 for earthing).
1 No. Modular switch complete with non metallic inner & outer plates, suitable metal boxes, etc.
IS marked (IS 9537 Part-3) suitably sized medium grade rigid PVC conduits (20mm min).
Saddles, junction boxes, bends, other accessories, ceiling roses, etc.
FAN POINTS
SITC of Concealed Point wiring (from Switch board) including Concealed Circuit Wiring (from DB to switch board) for ceiling fan after cutting grooves on wall/ RCC, neatly filling the grooves with cement mortar, making good thereof, etc. using following:-
SITC of 3 x 1.5 Sq. mm. heavy duty PVC insulated copper conductor stranded cable (1 for earthing).
1 No. Modular switch complete with non metallic inner & outer plates, suitable metal boxes, etc.
1 No. Modular electronic hum free 5 step fan regulator 100W complete with non metallic inner & outer plates, suitable metal boxes, etc.
IS marked (IS 9537 Part-3) suitably sized medium grade rigid PVC conduits (20mm min).
Saddles, junction boxes, bends, other accessories, ceiling roses, etc.
5A PLUG POINTS IN COMBINED POSITION
SITC of Plug Points using 5 pin 5/6A Modular type Socket & 5/6A Switch on surface/ recess including providing and fixing non-metallic inner and front plates, suitable size metal box, inter connections, etc. as required in Combined position.
5A PLUG POINTS IN INDEPENDENT POSITION
SITC of 5A Independent Plug Points including Concealed wiring after cutting grooves on wall/ RCC, neatly filling the grooves with cement mortar, making good thereof, etc. using following:-
5 pin 5/6A Modular type Socket & 5/6A Switch complete with non metallic inner & outer plates, suitable metal boxes, etc.
3 x 1.5 Sq. mm. heavy duty PVC insulated copper conductor stranded cable (1 for earthing).
IS marked (IS 9537 Part-3) suitably sized medium grade rigid PVC conduits (20mm min).
Saddles, junction boxes, bends, other accessories, etc.
15A SWITCH & SOCKET POINTS
SITC of 15A Plug Points including Concealed wiring after cutting grooves on wall/ RCC, neatly filling the grooves with cement mortar, making good thereof, etc. using following:-
3 pin 15/16A Modular type Socket & 15/16A Switch complete with non metallic inner & outer plates, suitable metal boxes, etc.
3 x 4 Sq. mm. heavy duty PVC insulated copper conductor stranded cable. (1 for earthing)
IS marked (IS 9537 Part-3) suitably sized medium grade rigid PVC conduits (25mm min).
Saddles, junction boxes, bends, other accessories, etc.
CONCEALED/OPEN WIRING THROUGH EXISTING CONDUIT
SITC of open/concealed wiring through existing conduit using following:-
3 x 1.5 Sq. mm. heavy duty PVC insulated copper conductor stranded cable
3 x 2.5 Sq. mm. heavy duty PVC insulated copper conductor stranded cable
3 x 4 Sq. mm. heavy duty PVC insulated copper conductor stranded cable
3 x 6 Sq. mm. heavy duty PVC insulated copper conductor stranded cable
FAN &LIGHT FITTING
SITC of 230mm Light duty Exhaust fan complete with front guard capacitor, louvers/shutters and all accessories as required complete on wall/ ventilator frame including connections with 3 x 1.5 Sq.mm PVC insulated copper conductor cable, making necessary holes on the wall/ventilator, making good thereof complete as required.
SITC of required length suitable size heavy gauge GI down rod for ceiling fan including painting as required
SITC of Conventional Street Light MS Tube conforming to IS1161, 7m overall length, 5.75m height above ground, sections of 4m height x 114.3mm OD x 3.65mm thickness - 1.5m height x 88.9mm OD x 3.25mm thickness - 1.5m height x 76.13mm OD x 3.25mm thickness - Swaged and angle arm conventional bracket for mounting fitting, bracket assembly on to the pole top by means of angular rings, foundation base plate, ribs, 4 fixing bolts, anchoring bolt, cable entry pipe, poles treated for corrosion protection, earthing arrangement, excavation and back filling, supplying and laying cables through junction box, wiring with 3x2.5 Sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete as required. Finish to be of approved colour. Entire application shall confoMetre to IS2713 for Tubular Steel Poles for Overhead Power Lines.
SITC of Junction box 200x150x125 mm of Thermoplastic weather proof (IP-65), connectors for loop-in loop-out arrangement, cable entry hole with grommet, 2 way connector, SP MCB complete.
SITC of 32A 415V 4P MCB Isolator in suitable plastic enclosure on surface or in recess complete with interconnections as required (for gang operation of external lights).
SITC of PVC conduits of following sizes. Conducting shall be down on surface /concealed /RCC / wall, including providing and fixing IS marked (IS 9537 Part-3) suitably sized medium grade rigid PVC conduits, fittings, accessories, etc. Necessary cutting grooves, fixing conduits, filling the grooves with cement mortar, making good thereof, etc. shall also be included in the cost. (Note: The rate shall include for removing, stacking and replacing of damaged existing conduit as per the Direction of Engineer- in -charge.)
20 mm dia
25 mm dia
32 mm dia
Supply and fixing of chequered plate of 6 mm thick including cutting to required size using gas cutter and lay the same over the trench, fixing of nosing angle and supports for chequered plate, related civil works, finishing etc. and painting with two coats of enamel paint over one coat of the appropriate primer as required.
Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete on wall.
Supply and fixing glass framed shock treatment chart with necessary accessories as per the direction of Engineer in charge.
Supply and providing ISI marked electrical 11kV grade 2 m X1 m X12 mm thick anti-skid rubber mat as per IS:5424.
Supply and installation of DCP type fire extinguisher of capacity 5 kg with upright operation conforming to IS:2171 having a jet length of 8 m with discharge time of 10 sec including all accessories.
Supply and providing rubber gloves tested for 11 kV.
Supply and fixing of required number of HT/MV voltage danger notice boards of 300x200mm size and colour as per statutory requirements wherever necessary.
Numbering of light fittings/ ceiling fan / exhaust fan as, etc. required by the client using enamel paint. (Note: Measurement will be taken per fan/light, etc)
CABLE TRAY
SITC of following size vertical & horizontal GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/ wall with threaded rod, anchor fastener, slotted rails, painting with two coats of zinc chromate primer and two coats of enamel paint as required
300mmX50mmX1.6mm thick
150mmX50mmX1.6mm thick
WIRING & ACCESSORIES
LIGHT POINTS
Supplying, Laying, following size of FRLS pvc insulated copper conductor, single core in the existing surface/recessed steel/pvc conduit as complete. Note: The rate shall include for inspecting, testing, removing and replacing of the damaged wires as necessary to complete as per the direction of Engineer in charge.
3X1.5 sq.mm
TWIN LIGHT CONTROL
Supplying, Laying, following size of FRLS pvc insulated copper conductor,single core in the existing surface/recessed steel/pvc conduit as complete. Note: The rate shall include for inspecting, testing, removing and replacing of the damaged wires as necessary to complete as per the direction of Engineer in charge.
3X1.5 Sq.mm
WIRING & ACCESSORIES
CONCEALED POINT WIRING
LIGHT Points
Supply and fixing of 5/6A modular switch for light Point/Fan point/Socket/ etc. on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged switch which is fixed in position at site as per the direction of Engineer in charge. And existing switches are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
5/6A switch
Supply and fixing of 2 way 5/6 A modular switch for two way switch on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged switch which is fixed in position at site as per the direction of Engineer in charge. And existing switches are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
Supply and fixing of fan regulator on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged regulator which is fixed in position at site as per the direction of Engineer in charge. And existing regulators are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
Supply and fixing of blank plate on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged blank plate which is fixed in position at site as per the direction of Engineer in charge. And existing blank plates are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
Supply and fixing of 5/6 A socket on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged socket which is fixed in position at site as per the direction of Engineer in charge. And existing sockets are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
Supply and fixing of 15/16 A switch on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged switches which is fixed in position at site as per the direction of Engineer in charge. And existing switches are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
Supply and fixing of 15/16 A sockets on the existing modular plate and switch box including connections but excluding modular plate etc.as required (make: Legrand Myrius) Note: The rate shall include to inspect, removing and replacing of the damaged socket which is fixed in position at site as per the direction of Engineer in charge. And existing sockets are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the existing modular plate (items of similar brand to be fixed into the metal box as required).
Providing and fixing of following sizes of modular plates of Legrand Myrius make to the existing metal boxes as complete as per the direction of Engineer-in-charge. Note: The rate shall include for inspecting, removing, stacking and replacing of existing damaged modular plate as complete. Also the existing modular plates are in the make of MK, non-damaged items are to be removed and stacked it will be refixed in the metal boxes (items of similar brand to be fixed into the metal box as required).
2 module
3 module
4 module
6 module
8 module
12 module
SITC of GI boxes neatly fixed with cement mortar, making good thereof, etc for the following sizes: Note:The rate shall also include Inspecting, Dismantling, removing, stacking and replacing of existing damaged GI box by cutting, chipping all complete as directed by the Engineer in charge.
2 module GI Box
3 module GI Box
4 module GI Box
6 module GI Box
MCB Distribution board
SITC of (4+12)WAY,DOUBLE DOOR MCB Distribution Board,Horizontal type three pole and neutral, sheet steel,MCB distribution board,415V ,on surface/recess, making good thereof complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar,interconnetions,powder painting including earthing etc.as required (but with out MCB /RCCB/ISOLATOR) Note: The rate shall include inspecting, Dismantling, Removing and stacking of existing damaged MCB distribution board by cutting and chipping, etc all complete as directed by the Engineer in charge.
SITC of 12Way,DOUBLE DOOR, MCB Distribution Board single pole and neutral, sheet steel,mcb DB 240V on surface/recessed, making good thereof complete with tinned copper bus bar earth bar din bar interconnection powder painted including earthing etc as required (but with out MCB /RCCB/ISOLATOR) Note: The rate shall include Inspecting, Dismantling, Removing and stacking of existing damaged MCB distribution board by cutting and chipping, etc all complete as directed by the Engineer in charge.
MCB/RCCB CIRCUIT BREAKERS
Supply and fixing 5A to 32A rating,240/415V,10KA,''C'' curve, Miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB Complete with connections, testing and commissioning etc. as required. Note: The rate shall include for testing and removing, stacking and replacing of damaged circuit breakers as directed by the Engineer -in- charge.
SINGLE POLE 5A TO 32A
25A double pole MCB
Supply and fixing of 25A DOUBLE POLE RCCB,30mA rating 240V RCCB having a sensitive current 30mA in the existing MCB DB complete with connection, testing and commissioning etc. as required Note: The rate shall include for testing and removing, stacking and replacing of damaged circuit breakers as directed by the Engineer -in- charge.
Supply and fixing of 32A 4 POLE MCB isolator in the existing DBs including connections etc. as required Note: The rate shall include for testing and removing, stacking and replacing of damaged isolators as directed by the Engineer -in- charge.
Supply and fixing of 32A 4 POLE RCCB in the existing DBs including connections etc. as required Note: The rate shall include for testing and removing, stacking and replacing of damaged circuit breakers as directed by the Engineer -in- charge.
PANEL BOARD & ACCESSORIES
ITC of following panel boards. All panel boards shall be fabricated out of 14 gauge CRCA sheet powder coated in cubicle compartmentalized, free standing, floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, 'T' sections wherever necessary, front detachable cover, rubber beadings, marking identification of switches, fully meeting all the requirements specified in the technical specifications and drawings. Galvanized hardwares with zinc passivation shall be used in fabrication. TPN switch gears shall be supplied with equally rated neutral link.
SUB SWITCH BOARD - BLOCK A (SSB-A)
The panel will be supplied at site with the below mentioned specification. The panel to be inspected and damaged Electrical and Electronics parts and hardware accessories to be replaced as per the norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified as Directed by Engineer in charge (Note: The rate shall be inclusive of repairing, installation, testing and commissioning the panel with required fitting)
Incoming
630A MCCB 50 kA TPN Micro Processor Based with Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
Analogue Ammeter (0-600A) with CR CT 600/5A 5VA CL:1 - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
600A TPN AL. Bus bars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCCB 160A 35 kA TPN Isolation duty, O/C & S/C releases - 7 Set
MCCB 40A 25 kA TPN Isolation duty, O/C & S/C releases - 6 Set
Panel Board - 1 No.
SUB SWITCH BOARD - BLOCK C (SSB-C)
The panel will be supplied at site with the below mentioned specification. The panel to be inspected and damaged Electrical and Electronics parts and hardware accessories to be replaced as per the norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified as Directed by Engineer in charge (Note: The rate shall be inclusive of repairing, installation, testing and commissioning the panel with required fitting)
Incoming
100A MCCB 50 kA TPN Micro Processor Based with Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
Analogue Ammeter (0-100A) with CR CT 100/5A 5VA CL:1 - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
100A TPN AL. Bus bars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCB 32A TPN 10kA - 8 Nos
Panel Board - 1 No.
LIFT PANEL
The panel will be supplied at site with the below mentioned specification. The panel to be inspected and damaged Electrical and Electronics parts and hardware accessories to be replaced as per the norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified as Directed by Engineer in charge (Note: The rate shall be inclusive of repairing, installation, testing and commissioning the panel with required fitting)
Incoming
SDF 40A RCCB - 1 No
100A TPN AL. Bus bars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
SDF 32A TPN - 2 No
HRC Fuses 25A -1 Set
HRC Fuses 16A -1 Set
ELCB 25A 4P 100mA - 1 No
ELCB 6A 2P 30mA - 1 No
Panel Board - 1 No.
DB PANELS - A BLOCK (1 to 6)
The panel will be supplied at site with the below mentioned specification. The panel to be inspected and damaged Electrical and Electronics parts and hardware accessories to be replaced as per the norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified as Directed by Engineer in charge (Note: The rate shall be inclusive of repairing, installation, testing and commissioning the panel with required fitting)
Incoming
160A MCCB 35 kA TPN Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
200A TPN AL. Bus bars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCB 32A TPN 10kA - 8 Nos
Panel Board - 1 No.
FAN & LIGHT FITTING
Supply, installation, testing and commissioning of following surface /recess mounting type LED light fitting complete with all accessories and lamp etc, directly on the ceiling/wall (All ceiling mounted fitting shall be fixed with 2 Nos anchor fasteners/extra chain shall be provided for suspension of recess fittings) including connections using 1.5 sqmm frls pvc insulated copper conductors single core cable as required (All LED) fittings shall be guaranteed for 5 years by the manufactures) Note: The rate shall include for testing, removing, stacking and replacing of the existing damaged/ non-working fittings and allied works as directed by the Engineer-in-charge.
Recess mounted linear mounting rail for LED tube (1200 mm long) prewired including providing and fixing T8 18W LED tube complete etc. as required.(Crompton model-ECO -1 code IGP161LT8 with LED tube LTT8-20/ similar product /Philips/LT/Disano/regent/osra m)
Recess mounted linear mounting rail for LED tube (1200 mm long) prewired including providing and fixing 2 Nos T8 18W LED tube complete etc as required.(Crompton model-ECO -1 code IGP162LT8 with LED tube LTT8-20/ similar product /Philips/LT/Disano/regent/osra m)
SITC of integrated surface type 4ft X 1 ft LED fitting having colour temperature not less than 5700k,sysytem lumen output not less than 3700 and system wattage 37 to 42 W
Integrated surface type 1ft X 1 ft LED fitting having colour temperature not less than 5700k,system lumen output not less than 1800 and system wattage 18 to 22W (Crompton model-Polaris nio-111 code LCTSNE-18-FO-CDL/Similar product/Philips/LT/Disano/regent/osar m
Surface mounted LED bulk head with IP65 luminous,flux output of not less than 700 lm and power consumption of more than 7W,complete with Alu/crca housing,diffuser and control driver complete etc as required(philips model-vista glow WT 140W LED 7S CW PSU S1 PC/similar product/Crompton /LT/DISANO/REGENT/osram
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. Blades, 30 to 50 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85,Air delivery minimum 215 CMM,350 RPM (tolerance as per IS 374-2019), THD less than 10%, without regulator and switch including all remaining accessories, safety pin, nut bolts, and washers, temperature tise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc complete as required. Crompton greaves/ Havells/Orient/ Atomberg) Note: The rate shall include for testing, removing, stacking and replacing of existing fixed damaged / not working ceiling fan as directed by Engineer-in-charge.
Providing and fixing of fan starting capacitor to the ceiling fan with rated current as described in the manufactures specification as complete with necessary connections as required Note: The rate shall include for removing of existing damaged capacitor as fixed.
EXTERNAL LIGHT
Supply and fixing,70W LED type road lighting luminaire with high power LED to ensure effective distribution, maintenance free system (make: Crompton LSTV-45 CD/EQUIVALENT OF BAJAJ/PHILIPS
Providing and fixing Fully Solid Vertical Air terminals for wind stability as per IS/IEC -62305 part-3. For 1,2,3, 4 meter air terminal 16mm rod tapered to 10 mm aluminium rod meter rod: For 6, 8 meter 40mm rod tapered to 16mm and then to 10mm Meets the requirement (IS/IEC 62305) Semi-hard (E-AlMgSiO5) Suitable for high wind load. All air terminal must have Interception Tip at the Top of air terminal. System consist of Fang Fix with base and clamp on the top air terminal is erected. Air terminal Joining Clip Stainless Steel SS 304 clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec wavefoMetre. Stainless Steel Wall Clamp or 16 KG stone of 365 mm diameter, high level of stability. No of stones/wall clamps depending on wind load. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked. For 6 & 8 meter air terminal for mounting: tripod stand or 3 no's & 4 no's respectively wall clamp will be required to withstand heavy wind load. Govt approved Indian labs test certificate required. Make: Cape / Erico / Furse
3 meter air terminal with Interception Tip mounted on Stainless Steel Wall Clamp mounting accessories
PUMP ROOM PANEL
Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump Set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
SYSTEM CONTROLLER Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Supply & Laying of Power cables, control cables, cable tray including earthing strips from MCC/ panel to pumps and instruments with all accessories.(Pump room & terrace pump)
ITC of following panel boards. All panel boards shall be fabricated out of 14 gauge CRCA sheet powder coated in cubicle compartmentalised, free standing, floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, 'T' sections wherever necessary, front detachable cover, rubber beadings, marking identification of switches, fully meeting all the requirements specified in the technical specifications and drawings. Galvanized hardwares with zinc passivation shall be used in fabrication. TPN switch gears shall be supplied with equally rated neutral link.
MAIN SWITCH BOARD (MSB)
Renovation to the existing installed panel: The panel specifications are given below. The panel to be inspected, removed, sacked and replaced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified. Directed by Engineer in charge (Note: The control wiring and power wiring of single line diagram should be submitted in hard copy after testing the technical test of components in MSB, The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
800A 4P 25kA ACB microprocessor based EDO Motorised type with 3 O/C, 1 E/F & 1 Shunt releases - 4 Nos.
Standby low Set E/F relay with CR 5P10 15VA CTs - 4 Set
RYB Indication lamps and controlling fuses/MCBs - 4 Set
Analogue Ammeter (0-600A) with CR CT 600/5A 5VA CL: 1/0.5 - 4 Sets
KWH Meter 3Ph. (0-600A) with control fuse on Generator incomer - 2 Set
Frequency meter on DG Incomer - 2 Nos.
"Load On"/"Power On" Indicators with control fuses- 2 Set
Bus Coupler - 800A 4P 25kA ACB microprocessor based EDO Motorised type - 1 No.
PLC Controller for monitoring, supervising and auto operation of TransfoMetreers and DG Sets, auto operations of switch gears, electrical interlocks, control wiring, software configuration, etc. as per specifications provided - I Job.
800A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
800A 4P 25kA ACB microprocessor based EDO Motorised type with 3 O/C & 1 E/F releases - 2 Nos.
MCCB 250A, 50 kA, TPN Microprocessor based with isolation duty with adjustable thermo magnetic O/C & S/C releases - 2 Set
MCCB 200A, 50 kA, TPN Microprocessor based with isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
MCCB 100A, 50 kA, TPN Microprocessor based with isolation duty with adjustable thermo magnetic O/C & S/C releases - 2 Set
Digital Panel Meter for V,A,kW,kWH,PF,Hz,kVA & kVAR, 0-600A with CR CT 600/5A 5VA CL: 0.5 with MCBs - 2 Set
Digital Panel Meter for V,A,kW,kWH,PF,Hz,kVA & kVAR, 0-200A with CR CT 200/5A 5VA CL: 0.5 with MCBs - 1 Set
Digital Panel Meter for V,A,kW,kWH,PF,Hz,kVA & kVAR, 0-100A with CR CT 100/5A 5VA CL: 0.5 with MCBs - 2 Set
Panel Board - 1 No.
SUB SWITCH BOARD - BLOCK B (SSB-B)
Renovation to the existing installed panel: The panel specifications are given below. The panel to be inspected, removed, sacked and replaced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note:The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
630A MCCB 50. kA TPN Micro Processor Based with Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
Analogue Ammeter (0-600A) with CR CT 600/5A 5VA CL:1 - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
600A TPN AL. Bus bars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCCB 160A 35 kA TPN Isolation duty, O/C & S/C releases - 7 Set
MCCB 40A 25 kA TPN Isolation duty, O/C & S/C releases - 6 Set
Panel Board - 1 No.
SUB SWITCH BOARD - BLOCK D (SSB-D)
Renovation to the exsting installed panel: The panel specifications are given below.The panel to be inspected, removed, stacked and repalced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note: The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
200A MCCB 50 kA TPN Micro Processor Based with Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
Analogue Ammeter (0-200A) with CR CT 200/5A 5VA CL:1 - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
200A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCCB 125A 35 kA TPN Isolation duty, O/C & S/C releases - 2 Set
MCCB 63A 25 kA TPN Isolation duty, O/C & S/C releases - 1 Set
MCB 32A TPN 10kA - 3 Nos
MCB 40A TPN 10kA - 2 Nos
Panel Board - 1 No.
SUB SWITCH BOARD-Substation (SSB-E)
Renovation to the exsting installed panel: The panel specifications are given below.The panel to be inspected, removed, stacked and repalced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note:The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
63A MCCB 50 kA TPN Micro Processor Based with Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
Analogue Ammeter (0-100A) with CR CT 100/5A 5VA CL:1 - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
100A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCB 25A TPN 10kA - 2 Nos
MCB 16A TPN 10kA - 2 Nos
Panel Board - 1 No.
DB PANELS - B BLOCK (1 to 6)
Renovation to the exsting installed panel: The panel specifications are given below.The panel to be inspected, removed, stacked and repalced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note:The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
160A MCCB 35 kA TPN Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
200A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCB 32A TPN - 8 Nos
Panel Board - 1 No.
DB PANELS - D BLOCK -1
Renovation to the exsting installed panel: The panel specifications are given below.The panel to be inspected, removed, stacked and repalced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note:The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
63A MCCB 25 kA TPN Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
100A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCB 32A TPN 10kA - 8 Nos
Panel Board - 1 No.
DB PANELS - D BLOCK -2
Renovation to the exsting installed panel: The panel specifications are given below.The panel to be inspected, removed, stacked and repalced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note: The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
125A MCCB 35 kA TPN Isolation duty with adjustable thermo magnetic O/C & S/C releases - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
200A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCB 32A TPN 10kA - 8 Nos
Panel Board - 1 No.
CAPACITOR PANEL - 1 & 2
Renovation to the exsting installed panel: The panel specifications are given below.The panel to be inspected, removed, stacked and repalced the damaged Electrical, Electronics parts and hardware accessories are to be replaced as per the standards, norms and regulation. Also the panel to be repainted with powder coated of approved colour and physical damage to be rectified.Directed by Engineer in charge (Note:The rate shall be inclusive of inspecting, repairing, installing, testing and commissioning the panel with required fitting)
Incoming
MCCB 250A 35 kA TPN Isolation duty, O/C & S/C releases - 1 Set
RYB Indication lamps and controlling fuses/MCBs - 1 Set
Analogue Ammeter (0-200A) with CR CT 200/5A 5VA CL-1 - 1 Set
Intelligent PF Controller with control MCB including control cable connection from MCBs incomers - 1 Set.
ON/OFF indicator with control MCB - 1 Set
200A TPN AL. Busbars with heat shrinkable insulation sleeves - 1 Set.
Outgoing
MCCB 63A 25 kA TPN Isolation duty, O/C & S/C releases - 6 Set
ON-OFF DUTY Contactor Capacitor (AC 6B duty) - 6 Set
7% Block Reactor - 6 Set
15 KVAr Capacitor Bank - 6 Nos
Panel Board - 1 No.
LT CABLES
UNDER GROUND
SITC of 1.1kV grade armoured XLPE insulated PVC sheathed power cables with Aluminium conductor of following sizes underground, including excavation of earth trench of required size and depth 75cm min. from finished ground level, supply and providing protective covering with country burnt bricks laid breadth-wise, refilling the trenches in layer, making good the damages, giving terminations by supply and fixing Brass compression gland including Aluminium lugs & Gland earthing as required.
3.5C x 300 Sq.mm
ABOVE GROUND
SITC of armoured XLPE insulated and PVC sheathed power cable of 1.1kV grade in the existing trench / pipes/ ducts / cable trays, giving terminations by supply and fixing Brass compression gland including Aluminium lugs & Gland earthing as required.
3.5CX185 sqmm
3.5CX50sqmm
Supplying, installation, testing and commissioning of Electric driven Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
Suitable 1 HP submersed motor, TEFC, 2400 RPM, suitable for operation on 240 volts, single phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325..
Preparation of drawings, documents, liaison work, etc. for getting final NOC from KSEB / Electrical Inspectorate / Highway Authorities and other Statutory Agencies. (Contractor shall pay all the statutory fees initially. However, the same will be reimbursed on submission of supporting doCuments).
PLUMBING WORKS
Providing and fixing white vitreous China pedestal type water closet(European type) with seat and lid,10 ltr low level white vitreous China flushing cistern &C.P flush bend with fittings brackets,40mm flush bend over flow arrangement, with special of standard make and mosquito proof coupling, PVC connection of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floor wherever required
a) W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing white glazed earthenware wash basin 550 x 400 mm or nearest size, of approved make, including one CP brass pillar cock 15 mm size including connecting pipes with all fittings chrome plated chain 32mm dia rubber plugs 32 mm dia CP brass waste coupling, 32mm dia waste pipe, PVC connection heavy brackets with two coats of aluminium paint, etc. complete as directed by Engineer-in-charge.
Providing and fixing white vitreous China flat back half stall urinal of size 590 x 375 x 390 mm and with approved make standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, in C.P. brass including cutting and making good the walls and floors wherever required complete.
Providing and fixing White vitreous China Division plate of standard size and make of size 690 x 325 mm
Providing anf fixing of float glass mirror of thickness 5 mm with approved back coating and backing with BWP ply wood of 12mm and fitted with mirror screw and cap all compete as per drawing and satisfaction of Engineer-in-charge.
Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP Brass screws, CP Brass Rail with with two CP Brass brackets
Providing & fixing white viterous china recessed pattern soap tray of size 216 x 108mm concealed in wall including all charges
Supplying, laying and jointing hard PVC pipes (working pressure 6 kg/cm2) with PVC specials such as tees, bends, door bend, door tee, elbows, unions, etc. with clamps including cutting chases in walls, floors and making good the walls, testing the lines after connecting to mains, rectifying any leakages or defects, etc. complete all as directed by the Engineer-in-charge for soil, waste, rain water, drains, vent pipe, etc. concealed or open.
Providing and fixing PVC floor trap (multi trap), with 50 mm water seal of following sizes for embedded areas, making proper connection with waste lines, cutting chase / holes in walls / floors and making good the same after placing the trap in right position etc. complete.
Providing and fixing CP brass grating of suitable size for floor trap and floor drain of approved design, including Setting in floor with cement mortar to match with floor finish as per Architect's requirements etc. complete.
Providing and fixing CP bib cock of approved quality conforming to IS Standards .
(a) 15 mm nominal bore.
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931.
15 mm nominal bore.
Providing and fixing CP brass shower rose 15mm or 20mm inlet
100mm diameter with fittings
Providing and fixing CP brass angle valve of approved quality conforming to IS:8931
15mm nominal bore
Providing and fixing CP brass hand shower (health faucets) with 8mm dia 1meter long flexible tube and wall hook with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:
WATER SUPPLY: Supplying, threading, laying and jointing hard PVC pipes (working pressure 15 kg/cm2 as directed with specials such as tees, bends, elbows, unions, etc. with clamps including cutting chases in walls, floors, etc. and making good the same, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for concealed lines for water supply.
Supplying, threading, laying and jointing hard PVC pipes (working pressure 10 kg/cm2 as directed with specials such as tees, bends, elbows, unions, etc. with galvanized clamps including cutting and making good the walls, floors, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for lines exposed on walls, floors etc. with required saddles for water supply.
Supplying, threading, laying and jointing hard PVC pipes (working pressure 10 kg/cm2) as directed with specials such as tees, bends, elbows, unions, etc. including earthwork, refilling, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for underground lines for water supply.
Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end). Note: The rate shall inclusive for removing of existing fixed damage valves
Constructing masonry chamber 60x60x75cm inside with 50 class designation brick work in cement mortar 1:5 (1 cement 5 fine sand) for sluice valve, with CI surface box 100mm top diameter 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks
providing and placing on terrace (at all floor level) polyethylene water storage tank ISI:12701 market indicating the BIS License no.with cover and suitable locking arrangement and making hole for inlet, outlet flow pipe but without forfeiting and the base support for tank
DRAINAGE: Supplying, threading, laying and jointing hard PVC pipes (working pressure 6 kg/cm2 as directed with specials such as tees, bends, door bends, elbows, door elbows, unions, etc. including earthwork, refilling, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for underground lines for soil and waste water line.
Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonry chamber with bricks of class designation 50 and water tight C.I. Cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design.
Constructing brick masonry manhole with 50 class designation bricks in cement mortar 1:4 (1 Cement 4 coarse sand) R.C.C. top slab with 1:2:4 (1 Cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete with 1:4:8 mix (1 Cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 Cement 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 Cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.
(a) Inside size 90 x 80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight and frame 15 kg)
With F.P.S. bricks.
(b) Inside size 120 x 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight and frame 58 kg)
With F.P.S. bricks.
Providing and fixing PVC flexible connector to the sanitary fittings with necessary hardware, standard length and required size as complete directed by the Engineer - in - charge.
SITC of C.P. spreaders with unions and clamps (all in C.P. brass) (of approved make) for flat back half stall urinal with necessary hardware, and required size as complete directed by the Engineer - in - charge.
Providing and fixing of solid seat cover with lid in the existing EWC of approved make and model Note: The rate shall include to removing of damaged seat cover
Providing and fixing White vitreous China Division plate of standard size and make of size 690 x 325 mm, material (Note: The rate shall include for dismantling, removing and stacking of existing broken or damaged division plate as directed by the Engineer -in- charge)
Supplying, threading, laying and jointing hard PVC pipes (working pressure 10 kg/cm2 as directed with specials such as tees, bends, elbows, unions, etc. with galvanized clamps, saddles including cutting and making good the walls, floors, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for lines exposed on walls, floors etc. for water supply. (Note: The existing pipe should be tested using pressure pump in the presence of Engineer-in-charge before using the same. Faulted or damaged pipe to be removed and replaced or rectify the leakage pipe with the prior approval of Engineer in charge. The rate shall include for testing the pipe with allied al expenses.)
Supplying, threading, laying and jointing hard PVC pipes (working pressure 10 kg/cm2) as directed with specials such as tees, bends, elbows, unions, etc. including earthwork, refilling, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for underground lines for water supply. (Note: The existing pipe should be tested using pressure pump in the presence of Engineer-in-charge before using the same. Faulted pipe to be removed and replaced or rectify the leakage pipe with the prior approval of Engineer in charge. The rate shall include for testing the pipe with allied all expenses.)
Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid,10 litre low level white vitreous China flushing cistern &C.P flush bend with fittings& C.I brackets,40mm flush bend over flow arrangement with special of standard make and mosquito proof coupling, PVC connection of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floor wherever required (Note: .The rate shall include for removing, stacking and replacing of existing broken / damaged EWC to be removed and replaced with the prior approval of Engineer in charge)
Providing and fixing white glazed earthenware wash basin 550 x 400 mm or nearest size, of approved make, including one CP brass pillar cock 15 mm size including connecting pipes with all fittings chrome plated chain 32mm Dia rubber plugs 32 mm Dia CP brass waste coupling, 32mm Dia waste pipe, PVC connection heavy brackets with two coats of aluminium paint, etc. complete as directed by Engineer-in-charge. (Note: The rate shall include for removing, stacking, and replacing of existing broken / damaged EWC to be removed and replaced with the prior approval of Engineer in charge)
Providing and fixing white vitreous China flat back half stall urinal of size 590 x 375 x 390 mm and with approved make standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, in C.P. brass, PVC connection including cutting and making good the walls and floors wherever required complete. (Note: The rate shall include for removing, stacking and replacing of existing broken / damaged sanitary ware to be removed and replaced with the prior approval of Engineer in charge)
Repair the existing installed drain pipe (working pressure 6/10 kg/cm2) in all shaft at site. All pipe joints to be make leak proof using solvent cement and additional supports to be provided pipe using GI clamps with slotted rail for the pipes complete as directed by the Engineer in charge.
Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid,10 litre low level white vitreous China flushing cistern &C. P flush bend with fittings& C.I brackets,40mm flush bend over flow arrangement with special of standard make and mosquito proof coupling, PVC connections of approved municipal design complete, including painting of fittings and brackets, cutting, and making good the walls and floor wherever required. Note: The rate shall include to remove the installed IWC/sanitary ware (without causing damage of sanitary ware) stacked and allied works if necessary, making good the floor all complete to the satisfaction of engineer in charge.
Providing and fixing of grab bar (GEZE make) with other required hardware’s for the physically challenged toilet all complete as per the direction of Engineer -in-charge.
Providing and fixing of 50 mm dia High pressure Gun metal float valve as per IS 1703 : 2000, valve body rating PN 16 with allied fittings all complete as per the direction of Enginner In Charge.
Supplying, threading, laying and jointing hard PVC pipes (working pressure 10 kg/cm2 as directed with specials such as tees, bends, elbows, unions, etc. with galvanized clamps, saddles including cutting and making good the walls, floors, etc. testing the lines after connecting to mains, rectifying any leakage or defects, etc. complete all as directed by the Engineer-in-charge for lines , floors etc. for sanitary Note: the rate shall include removing of pcc, sunken filling all complete as per the direction of Engineer -in- charge.
FIRE FIGHTING WORKS
SITC of CI double flanged dual plate non-return valve conforming to IS: 5312, PN:1.6 Note: The rate shall include for removing, stacking and replacing of existing double flanged sluice valve fixed in position all complete as per the direction of Engineer in charge.
150mm dia
Inspecting, renovating of existing fixed 150 mm dia Non return / slice vale at site. The rate shall include for servicing all parts, free from corrosion, repainting with1 coat of primer and 2 coat of enamel paint, changing of fly wheels and to be all complete for smooth operation as per the direction of Engineer in charge.
SITC of gun metal fire hydrant valve, single head oblique type 63mm instantaneous outlet with female socket for hose connection and inlet side with flange suitable for 80mm pipe flange, valve conforming to IS:5290 complete with GM blank, can chain etc. completed as required
single headed gunmetal
Inspecting, renovating of existing fixed fire hydrant vale at site. The rate shall include for servicing all parts, free from corrosion, repainting with1 coat of primer and 2 coat of enamel paint, changing of fly wheels and make leak free all complete for smooth operation as per the direction of Engineer in charge.
SITC of hose reel 30m length and 20mm dia. high pressure braided rubber lined hose with shut-off valve 25mm dia, nozzle, etc. mounted on drum of type a of IS:884 fitted on swivel joints and reel brackets to the recess made on walls at standard height from floor level, connected to hydrant main with stop valve, etc. completed as required.
SITC of water shield controlled percolation hose,63mm inside dia conforming to IS:8423 and gun metal 63mm size male coupling at one end and female coupling at other end conforming to IS:903 of length,7.5mtr
Gun metal
SITC of branch pipe short,gun metal 63mm instantaneous inlet, male threaded outlet, complete with hexagonal base,20mm bore nozzle conforming to IS:903 complete as required
Gun metal
Supply of Fire Fighting Application MS Hose Box 600mm x 750 mm x 250 mm to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant Point including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers
SITC of conventional optical smoke detector complete with all accessories like base, base box, etc. To be installed under/above false ceiling, roof and concealed space, etc. Interconnecting to loop cable complete as required Note: The rate shall include for testing of the existing smoke detector as installed in the presence of Engineer-in-charge. The Faulted detector to be removed and replaced with the prior approval of Engineer in charge.
SITC of Conventional heat detector (fixed Cum-rate of rise type) with brance upto 60oC complete with all fixing accessories like base, base box,etc.to be installed under/above false ceiling, roof and concealed space,etc.interconnecting to loop cable completed as required.
SITC of Conventional Manual Call Point (Break glass type) complete with push button, enclosed in 16 SWG MS box with provision for cable or conduit coupling. The unit to be painted fire red outside, white inside and written 'In case of fire, break glass'', all as per standards with all necessary accessories and mounting, etc. interconnecting to loop cable complete as required. Note: The rate shall include for testing of existing manual call Point as fixed in the presence of Engineer-in-charge. The glass to be provided wherever required. The defective MCP's are to be removed, stacked and replaced as per the direction of Engineer in charge.
Supply and laying of pvc insulated copper wire FRLS armored cable with clamps at intervals of 0.50 m c/c for connecting of all fire detection and alarm devices and interconnecting them size 2x1.5 sq.mm (colour code RED to be followed) Note: The rate shall include for testing of existing cables as laid at site using megger test. The defected cable to be removed, stacked, and re-laid all complete as per the direction of Engineer In charge.
SITC of conventional type Fire hooter of approved make (RAVEL,HONEYWELL,NAVEEN,AGNI) as per standard specification and as per the directions of engineer-in- charge etc. complete. Note: The rate shall include for testing of existing hooter as fixed at site to be inspected and defective speakers to be removed and stacked and replaced all complete as per the direction of Engineer in charge.
The existing fire pump of capacity 900 lpm 32 m head centrifugal type mono block, electric driven pump to be fully serviced with replacement of damaged parts and making good ready for operation all complete as directed by the Engineer in Charge. The rate shall include all consumables, labour, transportation, etc needed all complete.
SITC of above ground pipes of MS Class "C" heavy duty pipes for overhead lines as per the fittings necessary supports at 1 m intervals, air release valves as required, painted with two coats of oil primer and two coats of enamel paint as per IS approved colour code. The rate shall include opening of existing walls, RCC, partitions, etc for taking pipes and making good thereof all complete as per the direction of Engineer in charge.
150mm dia
100 mm dia
80mm dia
25mm dia
The existing hose boxes wall/pedestal type of size 750 X 250 x 600 mm to be inspected, repairied to the physical damages if any, repainting with a coat of primer and 2 coat of enamel paint of approved colour and changing of glass, lock arrangements and providing holding supports of hose reel and other accessories to be completed as required and as per the standard specification and refixed in position after completing the renovation work. The rate shall include all consumables, labours etc.
Repairs to the MS Pipe: Remove the loose rust by wire brushing, chipping, hammering or grinding. Then apply a coat of rust remover from the approved brands and complete as per the manufacturer specifications. The rate shall include 1 coat of appropriate primer and 2 coat of epoxy paint on the pipe and supports to be complete as per the direction of Engineer in charge. Note: The defective part of pipe with hole, crack, etc.. are to be removed and replaced with Ms pipe of required dia. The rate for pipe will be paid separately.
150mm dia
100 mm dia
80mm dia
MISCELLANEOUS ITEMS
Supply and installation of DCP type fire extinguisher of capacity 5 kg with upright operation conforming to IS: 2171 having a jet length of 8m with discharge time of 10 sec including all accessories, check extinguisher manufacturing date supplied by client renew the extinguisher if date expired
Supply and installation of CO2 type fire extinguisher of capacity 4. 5 kg with upright operation conforming to IS:2171 including all accessories. Check extinguisher manufacturing date supplied by client renew the extinguisher if date expired
Refilling of DCP type fire extinguisher of capacity 5 kg as per the standard procedure and The rate shall include installation, testing and commissioning all complete as per the direction of engineer in charge.
Refilling of CO2 type fire extinguisher of capacity 4.5 kg as per the standard procedure and The rate shall include installation, testing and commissioning all complete as per the direction of engineer in charge.
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325..
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
2850 lpm at 56 m Head (Electric driven Pump for Sprinkler & Hydrant)
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
2850 lpm at 56 m Head (Diesel Driven Pump)
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
180 lpm at 56 m Head (Jockey Pump)
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
25mm dia
65mm dia
80mm dia
100mm dia
150mm dia
200mm dia
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type as per IS standards.
25mm dia
Supplying, installing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
50mm dia
65mm dia
80mm dia
150mm dia
100 mm dia
200mm dia
Providing, installation, testing and commissioning of non-return valve of following sizes confiMetreing to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
65mm dia
150mm dia
200mm dia
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
80mm dia
200mm dia
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers.
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
Providing & fixing of pressure switch in M.S./GI pipe line including connection etc. as required.
Providing & fixing of flow switch in M.S./GI pipe line including connection etc. as required.
150mm dia
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia complete
Supplying, installing, testing and commissioning of Flow Metre (Electronic type) on Test line to measure 150 % of pump flow and suitable to 150 mm dia. FM Approved / UL listed
Supply, installation, testing & commissioning of Exhaust pipe from diesel engine - M.S pipe confiMetreing to IS: 1239 part-1, medium grade (class-B) including long radius elbows, flanges, metallic expansion bellow as required. Rate shall include civil works as instructed by site engineer & rain hood at the top of exhaust pipe. Rate shall also include 50 mm thick mineral wool insulation (density 140 kg/Cum) with 24 SWG aluminium cladding. (150mm dia)
Supplying & fabricating structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers, slotted rails etc. complete with 1 coat of primer and 2 coat of enamel painting all complete as per the direction of Enginner In charge.
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipment's on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Gun Metal
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
2 way - 150 mm dia M.S. Pipe near UG Sump
4 way - 150 mm dia M.S. Pipe
SPRINKLER SYSTEM: Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
25mm dia
32mm dia
40mm dia
50mm dia
65mm dia
80mm dia
100mm dia
150mm dia
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating K80 68 degree centigrade with required accessories :
Pendent Sprinkler
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating K 80 79 degree centigrade with required accessories :
Pendent Sprinkler
Providing, fixing, testing & commissioning of control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of following sizes as required :
150mm dia
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread itch reducer, nipple, 2 side brackets, center bracket, stock bar of following sizes complete as required.
Providing, installation, testing & commissioning of adjustable roSette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
FIRE EXTINGUISHERS
ABC Multipurpose - Capacity : 6Kgs.
CO2 - Capacity : 2.0Kgs.
CO2 - Capacity : 4.5Kgs.
DCP - Capacity : 6Kgs.
Mechanical Foam- 9ltr
Fire Buckets 2nos. with stand
SIGNAGES
Providing and fixing in position the signage's " FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyl painted foam board of 3' x 4'.
ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL Point LOCATED AT STRATEGIC LOCATION.
EVACUATE THE OCCUPANTS BY USING THE FIRE EXITS & EMERGENCY EXITS ONLY. ASSEMBLE AT VARIOUS ASSEMBLY PointS
IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING THE NEAREST/SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER
BE CALM, DO NOT GIVE ANY ROOM FOR PANIC, WALK, DO NOT RUN
IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUATION, STAY IN YOUR PLAN AND TRY TO ATTRACT ATTENTION OF RESCUE TEAM
Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners.
ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFOMetreATION THROUGH FIRE ALarm OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM.
ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM.
INFOMetre FIRE CONTROL THROUGH ANY ONE OF THE FOLLOWING PHONE NUMBERS:
IN CASE OF THE CASUALTIES, CALL AMBULANCE BY DIALLING NUMBER……..
FIRE FIGHTING AGNECY -------------------------------
PHONE : -----------------------
Fire and emergency signage Boards( Fire escape directions, First aid charts, First aid box indications, safe material handling procedures, Fire assembly area indications etc.,) The signage's should be battery backup with self illumination
Providing and installing of Fire Evacuation Plan with route in rectangular Acrylic sheet with ss bolt of size 600 x 450mm & 2 to 3mm thick
FIRE DETECTION & ALARM SYSTEM (ADDRESSABLE)
Ten Loop Panel.
Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required.
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise Cum fixed temperature thermistor complete with base as required.
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.
Supplying, installation, testing & commissioning of addressable manual call Point complete as required.
Supplying, installation, testing & commissioning of addressable horn Cum strobe complete as required.
Supplying, installation, testing & commissioning of fire fighter telephone handSet complete as required.
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & RLS outer sheath complete as required.
PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
Supplying, installing, testing & commissioning of 10W Wall Mount Speaker
Supplying, installation, testing & commissioning of digital audio amplifier 200 Watt, 25V Metres operating at 240 Volt AC Supply complete as required.
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following Pairs, cores and size including connections and interconnections etc. as required.
speaker cable Two Pair, 2-core, 1.5 sqmm
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
Preparation of drawings, documents, liaison work, etc. for getting initial/ final NOC from FIRE and rescue department/ Pollution Control Board/ Highway Authorities and other Statutory Agencies. (Contractor shall pay all the statutory fees initially. However, the same will be reimbursed on submission of supporting doCuments).
DATA NETWORK
CAT CABLES
Supply and laying of Cat 6 U/UTP 24 AWG cable in already laid PVC conduit.
CONDUITS: Supply and Laying of Following FRLS PVC / CASING CAPING conduit in open using all accessories like bend,couplers,reducers,Junction Boxes, flexible hose, clamps and screws etc.,
25mm Dia FRLS PVC 2.0mm thick Conduit
20mm Dia FRLS PVC 2.0mm thick Conduit
25 mm X 12 mm X 1.2 mm PVC Casing and Caping pipe
DATA Socket
Supply and fixing of RJ45 Socket with PVC front plate and Back box with necessary accessories etc.,
NETWORKING COMPONENTS
Supply and fixing of male RJ45 connector
Supply, Installation, Testing and Commissioning of 24 port Giga bit slim switch.10/100/1000 MBPS
Supply, Installation, Testing and Commissioning of 4 port POE Giga bit slim switch.10/100/1000 MBPS
Supply, Installation, Testing and Commissioning of 9U Wall mounted Rack with pdu sockets , fan,10" tray 2nos,cable organiser and hardware kit.
Supply, Installation, Testing and Commissioning of 6U Wall mounted Rack with pdu sockets , fan,10" tray 2nos,cable organiser and hardware kit.
CAT 6 RJ 45 Patch cord 2Mtr length
Wireless acess Point with POE enable.
Controller for above wireless acess Point
Supply and installation of 12 Port Liu
Supply and installation of 24 Port Liu
Supply and fixing of Optic fibre patch cord
Supply and installation of Fibre module
Supply and Laying of 6C Optic fibre cable in already laid conduit
Supply & Installation of single phase input & output 600 VA UPS with 30min battery backup with all necessary accessories etc.,
Supply & Installation of 6A single phase socket with front plate and back box etc.,
Supply and laying of 3runs of 1.5 sqmm FRLS Cu wire with PVC conduit & necessary accessories etc.,
Supply and installation of 20 mm ms pipe through wall/under ground include all accessories
Supply and installation of 25 mm ms pipe through wall/under ground include all accessories
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid