Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC 2 A NARENDRA APPARTMENT CENTRAL JAIL ROAD SUBHASH BRIDGE AHMEDABAD 380027 | AHMEDABAD | AHMEDABAD | GUJARAT | 380027 | ₹16.6 L Quoted ₹21.4 L | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED |
| 2 | L2₹21.7 L+₹33,550 (1.57%)Rejected-AOC | ₹21.7 L+₹33,550 (1.57%) | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| 3 | L3₹23.7 L+₹2.4 L (11.1%)Rejected-AOC A 3 13 SIMANDHAR ENCLAVE NEAR PAVAPURI BUS STOP GHATLODIYA AHMEDABAD GUJARAT 380061 | AHMADABAD | GUJARAT | 380061 | ₹23.7 L+₹2.4 L (11.1%) | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| 4 | L4₹24.1 L+₹2.7 L (12.5%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | ₹24.1 L+₹2.7 L (12.5%) | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| 5 | L5₹25.5 L+₹4.1 L (19.3%)Rejected-AOC | ₹25.5 L+₹4.1 L (19.3%) | L5 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| Sl No | Description | Qty | Unit | Shree Krushna Supply Corporation L1 | DEMROT ELECTRICAL WORKS L2 | ALBA AC AND REF SERVICES L4 | BK CONSTRUCTION L7 | Jinendra Chemicals L5 | ASK INFRA L6 | JYOT ENTERPRIES L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for taking out water pipes,without damaging to existing external services water, electric sewage, NFS and PNG gas Line etc in any type soil all as specified and directed by Engr-in-Charge. | 50 | CUM | 280 ₹14,000 | 500 ₹25,000 | 225 ₹11,250 | 240 ₹12,000 | 220 ₹11,000 Lowest | 300 ₹15,000 | 220 ₹11,000 Lowest |
| 2.00 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed by Engr-in-Charge. | 170 | CUM | 105 ₹17,850 | 80 ₹13,600 | 72 ₹12,240 | 120 ₹20,400 | 120 ₹20,400 | 50 ₹8,500 | 40 ₹6,800 Lowest |
| 3.00 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed by Engr-in-Charge at a level not exc. 1.5 m above the starting point complete all as specified and directed. | 65 | CUM | 100 ₹6,500 | 50 ₹3,250 | 90 ₹5,850 | 90 ₹5,850 | 90 ₹5,850 | 50 ₹3,250 | 40 ₹2,600 Lowest |
| 4.00 | Taking up 200 mm bore, cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | 825 | RM | 40 ₹33,000 Lowest | 100 ₹82,500 | 60 ₹49,500 | 100 ₹82,500 | 100 ₹82,500 | 85 ₹70,125 | 50 ₹41,250 |
| 5.00 | Taking up,150 mm bore, cast iron /DI/GI MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | 5 | RM | 40 ₹200 Lowest | 100 ₹500 | 75 ₹375 | 80 ₹400 | 100 ₹500 | 60 ₹300 | 50 ₹250 |
| 6.00 | Taking up,100 mm bore, cast iron /DI /GI /MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | 5 | RM | 40 ₹200 Lowest | 50 ₹250 | 50 ₹250 | 60 ₹300 | 100 ₹500 | 50 ₹250 | 50 ₹250 |
| 7.00 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 80mm bore of pipe complete all as specified and directed. | 5 | RM | 850 ₹4,250 | 1,500 ₹7,500 | 1,080 ₹5,400 | 1,090 ₹5,450 | 300 ₹1,500 Lowest | 1,400 ₹7,000 | 900 ₹4,500 |
| 8.00 | S&F in repair/replacement, galvanized, steel water tubes, for 80mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | 5 | RM | 850 ₹4,250 | 1,500 ₹7,500 | 1,170 ₹5,850 | 1,090 ₹5,450 | 300 ₹1,500 Lowest | 1,450 ₹7,250 | 900 ₹4,500 |
| 9.00 | Supply, laying, connecting, jointing and testing of DI pipe with Flanged or spigot and socket ends, class K-7 conforming to IS: 8329/2000 and 12288 (1987) suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant with a finishing layer of black bitumen coating on external surfaces in any length, laid in trenches complete all as specified and as directed by Engr-in-Charge of the following size 200 mm Bore Spigot and Socket end complete all as specified and directed. | 825 | RM | 2,050 ₹16,91,250 | 1,850 ₹15,26,250 Lowest | 2,285 ₹18,85,125 | 2,550 ₹21,03,750 | 2,400 ₹19,80,000 | 2,450 ₹20,21,250 | 2,230 ₹18,39,750 |
| 10.00 | Supply, laying, connecting, jointing and testing of DI pipe with Flanged or spigot and socket ends, class K-7 conforming to IS: 8329/2000 and 12288 (1987) suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant with a finishing layer of black bitumen coating on external surfaces in any length, laid in trenches complete all as specified and as directed by Engr-in-Charge of the following size 150 mm Bore Spigot and Socket end complete all as specified and directed. | 5 | RM | 2,100 ₹10,500 | 1,800 ₹9,000 | 1,800 ₹9,000 | 1,850 ₹9,250 | 1,900 ₹9,500 | 2,000 ₹10,000 | 1,760 ₹8,800 Lowest |
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
10 Jun 2026, 6:00 pmClosed
GE ARMY GANDHINAGAR
GE ARMY GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
SPECIAL REPAIR TO REPLACEMENT CONVERSION TO CI TO DI OF RING MAIN RISING MAIN WATER LINE FROM NEAR PH I TO PH II AT MIL STN GANDHINAGAR
2026_MES_766936_1
GE(A)/GNR/TOKEN/32 of 2026-27
Open Tender
Civil Works - Water Works
Item Rate
180 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹48,000
Yes
22 Aug 2026
21 May 2026
17 Jun 2026
21 May 2026
10 Jun 2026
4 Jun 2026
21 May 2026 - 2 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for taking out water pipes,without damaging to existing external services water, electric sewage, NFS and PNG gas Line etc in any type soil all as specified and directed by Engr-in-Charge. | 50 | CUM | - | - |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed by Engr-in-Charge. | 170 | CUM | - | - |
| 3 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed by Engr-in-Charge at a level not exc. 1.5 m above the starting point complete all as specified and directed. | 65 | CUM | - | - |
| 4 | Taking up 200 mm bore, cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | 825 | RM | - | - |
| 5 | Taking up,150 mm bore, cast iron /DI/GI MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | 5 | RM | - | - |
| 6 | Taking up,100 mm bore, cast iron /DI /GI /MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | 5 | RM | - | - |
| 7 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 80mm bore of pipe complete all as specified and directed. | 5 | RM | - | - |
| 8 | S&F in repair/replacement, galvanized, steel water tubes, for 80mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | 5 | RM | - | - |
| 9 | Supply, laying, connecting, jointing and testing of DI pipe with Flanged or spigot and socket ends, class K-7 conforming to IS: 8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant with a finishing layer of black bitumen coating on external surfaces in any length, laid in trenches complete all as specified and as directed by Engr-in-Charge of the following size 200 mm Bore Spigot and Socket end complete all as specified and directed. | 825 | RM | - | - |
| 10 | Supply, laying, connecting, jointing and testing of DI pipe with Flanged or spigot and socket ends, class K-7 conforming to IS: 8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant with a finishing layer of black bitumen coating on external surfaces in any length, laid in trenches complete all as specified and as directed by Engr-in-Charge of the following size 150 mm Bore Spigot and Socket end complete all as specified and directed. | 5 | RM | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
BOQ_858915.xls
BOQ • 0.41 MB
TenderDocuments.pdf
Tender Documents • 2.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .