GOVERNMENT GRANT

Name Of Work :SUPPLYING & ERECTION OF LED LIGHT WITH POLE FROM AVASAR PARTY PLOT TO

VALLABHANAGAR RUB AT BAVLA.

Schedule-B1 :SUPPLYING & ERECTION OF LED LIGHT WITH POLE FROM AVASAR PARTY PLOT TO

VALLABHANAGAR RUB AT BAVLA.

Sr. No. Description Quantity Unit Rate Amount

1 Making trench in soft soil of suitable width of 90 90.00 R.Mt. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

2 Drilling the road without breaking the road 10.00 R.Mt. 492.88

surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of

holes at both ends complete.

(A) Up to 100 mm bore dia

3 Supplying and erecting approved make Octagonal 4.00 Each. 6874.06

pole made from HR sheet steel. The pole should

be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759,

suitable suspend local wind speed with integral

Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom

dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts

and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 46 kg

4 Providing and erecting Street Light pole bracket 4.00 Nos. 683.77

comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm /80mm / required size

of pole top having sufficient fasteners for fixing

the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.

[A] Single Arm Bracket 1.5 Mtr

5 Supplying and erecting LED street light / Flood 4.00 Each. 6566.01

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) (A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(iv) above 90 to 120 watts

6 Providing 1:2:4 cement concrete foundation & 70 4.00 Each. 809.01

% PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below

ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved

( for 4 & 6 mtr pole)

7 providing and erecting Miniature circuit breaker 4.00 Each. 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

8 Supplying and erecting Flexible PVC insulated 22.00 R.Mt. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

(h) 2.50 Sq.mm 3 core round PVC sheathed

9 Providing and erecting XLPE(IS:7098)(I)-88 ISI 140.00 R.Mt. 1504.90

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(C) 4 core 25 Sq. mm

10 Providing & laying approved make Double 140.00 Rmt. 62.62

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

11 Providing and, fixing heavy duty flange type brass 11.00 Each. 51.51

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(E) 2 to 4 core 25 Sq. mm

12 Supplying & erecting approved make IP 55 grade 1.00 Each. 12399.77

Company fabricated Timer Panel of following

capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly

epoxy power painted inside and outside with

hinged doors and locking arrangement consisting

of suitable size of 4 Pole MCB and 4 pole

contactor (cat-III)with analog time switch, auto

manual switch of same make and suitable input

and output Bakelite terminals and with door

earthing approved by Engineer in charge.

13 Pipe type earthing having 150 cms.long and 2.5 4.00 Each. 368.65

cms. dia. galvanised iron pipe with coupling and

buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

14 For using salt and charcoal / coke as required for 4.00 Each. 171.70

pipe type earthing.

15 Providing and erecting HOT deep Galvanised iron 4.80 Kgs. 77.77

strip wire 8 to 16 SWG.

16 Supplying & erecting funnel type earthing having 1.00 Each. 2568.43

earth plate of following size burred in

specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm.dia. G.I.

pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per

para 7.3 of IS 3043 with necessary length of

double Galvanised Iron / copper earth wire No

SWG bolted with lug to the plate and covered in

12 mm dia. G.I. pipe 2.5 mtr long complete

connected to the nearest switch gear with end

socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with

following specification

(B) With 45 x 45 x 0.35 cms. C.I. earth plate

17 Solderless crimping type Aluminium lugs 55.00 Each. 15.15

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

Total ( B1 ) :-