Providing and Fixing of Open Gym Equipment in Various Parks of Municipal Corporation, Ambala City.(Recall)

Amount

Providing and fixing Air Walker with below specifications:- Dimensions (LxWxH) 1100x550x1480mm, fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. ‘U’ shaped main frame of NB 65mm (G.I) ‘C’ Class Pipe. All other pipes of NB 32mm (G.I) ‘C’ Class. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres), all pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015 The equipment must accompanied with Test report for Quality, Safety, Durability and Proper Functioning of Equipment must mandatory requires Test report in the name of both Tenderer act as bidder and manufacturer. 1. Test Report of SS Nut and Bolts 2. Test Report of LLDPE Base Caps for Open Gym 3. Test Report of Powder Coating Pipe 4. Test Report of SKF Bearing No. 6007-2Z 5. Test Report of FRP/Plastic (Fiber Pad) 6. Test Report of Welding Pipe (Robotic MIG Welding) 7. Test Report of MEK Solvent 8. Test Report of Neutrul Salt Spray Test 9. Test Report of Breaking Load of Welding Pipe 10. Test Report of GI Pipe 100 mm NB 11. Test Report of GI Pipe 80 mm NB 12. Test Report of GI Pipe 50 mm NB 13. Test Report of GI Pipe 32 mm NB Test Report of GI Pipe 25 mm NB

Providing and fixing double Sit-Up Station with below specifications:- Dimensions (LxWxH): 1500x1150x650mm, fabricated with main post of NB 50mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe, Leg support of NB 65mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Fixed on its top is back support made of perforated MS sheet of 2mm thickness. All pipes are powder coated using Akzo Nobel or equivalent point of 80-120micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. The equipment to be fixed on ground with concrete of minimum strength M-25 and Expansion Bolts. Once the concrete is set, the equipment is fixed on to it. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015

Providing and fixing Air Swing in pair with below specifications:- Dimensions (LxWxH): 1150x900x1250mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle support frame of NB 40mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015

Providing and fixing Leg Press in a pair with below specifications:- Dimensions (LxWxH): 1750x550x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015

Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015

Providing and fixing Arm Wheel in a pair with below specifications:- Dimensions (LxWxH): 850x800x1800mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015

Providing and fixing Elliptical exerciser with below specifications:- Dimensions (LxWxH): 1200x540x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015

THE DSP CO-OPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED (BID ID -1170896)