Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC 47 A SHIKARGARH ARMY AREA JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹26.0 L+₹1.1 L (4.50%)Rejected-AOC 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-AOC Not lowest | |
| 3 | L3₹28.0 L+₹3.1 L (12.6%)Rejected-AOC SARDARPURA 1ST B ROAD NEAR HANUMAN JI KA MANDIR JODHPUR RAJASTHAN 342 003 | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L3 | Rejected-AOC Not lowest |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jodhpur
GE (AF) Jodhpur
ADDN/ALTN FOR IMPROVEMENT OF ATC BUILDING, PROVISION OF UNDERGROUND RAMP FOR VEHICLE SERVICING AND PROVN OF ALUMINIUM PARTITION AT ACCTS AND MET SECTION AT AF STN JODHPUR
2022_MES_548785_2
8531/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Jodhpur
As per NIT
6 documents required · 6 mandatory
₹500
GE (AF) Jodhpur
₹56,000
Yes
11 Nov 2022
22 Sept 2022
15 Oct 2022
22 Sept 2022
13 Oct 2022
30 Sept 2022
Amount
Excavation in post holes (or similar holes) in soft/loose soil, each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 15 m and making good surfaces complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing Mild Steel work as in tubular trusses/columns/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by the Engineer - in - Charge.
Material & labour for preparation of new or previously untreated steel surface of any description over 10 cm width and girth, not otherwise described and applying two coats of synthetic enamel paint (first quality) over one coat of red oxide primer complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed by the Engineer-in-Charge.
Material & labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, benching etc complete all as specified and directed by the Engineer-in-Charge.
Material & labour for Cement concrete Type B-2, 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and as directed by Engr-in-Charge .
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified & directed by the Engineer-in-Charge.
Material & labour for 100 mm thick, PCC 1:4:8, type D-2, (using 40 mm graded stone aggregate), as in sub base or flooring, pavings complete all as specified & directed by the Engineer-in-Charge.
Material & labour for providing and laying 80 mm thick, M-40 grade, rubber moulded machine pressed PCC interlocking paver blocks of shape and colour as approved by Engineer-in-charge, confirming to IS 15658-2006, with grey cement and pigment, laid dry over and including 25 mm thick screed river washed sand cushion as in floors complete all as specified and directed by Engr-in-Charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing Solid fire retardant PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing 5mm thick PVC fire retardant PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer - in - Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base for laying tiles/floor finishes etc complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, light shade, area of each tile not exceeding 0.36 Sqm as in floors etc set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, light shade, area of each tile not exceeding 0.36 Sqm as in vertical surfaces/skirting/dado etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick rendering in cement mortar (1:4) complete all as specified & directed by the Engineer-in-Charge.
Material & labour for coloured Non-Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by the Engineer - in - Charge.
Material & labour for coloured Non-Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces/skirting/dado etc set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick rendering in cement mortar (1:4) complete all as specified & directed by the Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing anodised aluminium window and ventilator shutters powder coated (thickness of powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing 4.8mm thick frosted sheet glass ordinary quality, area exceeding 0.50 Sqm in each pane and glazing with oil putty/aluminium beading complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing 18 mm thick solid PVC ply of first quality of approved colour and fixed with screws solvent cement /adhesive Complete all as specified & directed.
Supply and fixing 18 mm thick solid PVC ply of first quality of both side white colour fixed with screws, solvent cement /adhesive complete all as specified and as directed.
Supply and fixing Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised for 30mm width of flaps (when open), complete all as specified and directed.
Supply and fixing Magnet catcher for CB/ cabinet shutters complete all as specified and directed.
Supply & fixing stainless steel handles fabricated type of size 100mm, complete all as specified and directed.
Taking down cement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed by the Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed by the Engineer-in-Charge
Material & labour for rendering 15mm thick in cement mortar 1:6, on stone masonary surfaces, surface finished smooth and even without using extra cement complete all as specified & directed by the Engineer-in-Charge.
Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper, white or tinted over a coat of primer including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge.
Material & labour for glazed ceramic coloured tiles, of size 600mm x 300mmx 7 mm or 450 mm x 350 mm x 7mm in vertical surface, set and jointed in neat cement slurry & pointed in white or coloured cement to match with colour of tiles, laid over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and as directed by the Engineer - in - Charge.
Material & labour for coloured Non-Skid ceramic tiles of size 300 mm x 300 mm and 8 to 10 mm thick (squares/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by the Engineer - in - Charge.
Disconnecting existing tanks of any capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & directed by the Engineer-in-Charge.
Supply and fixing in repairs rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), ISI marked hoisted & fixed in position including 20 mm bore ball valve PTMT high pressure with polythyne float and flynut complete all as specified and as directed.
Taking up or down steel tubing of 15 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge.
Taking up or down steel tubing of 20 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge.
Refixing of 15 mm bore old steel tubing & connection in new or old position with new fittings and fixed (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge.
Refixing of 20 mm bore old steel tubing & connection in new or old position with new fittings and fixed (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing 15 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs Bib taps, brass chromium plated fancy type, 15 mm bore, long body complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing in repairs two way brass chromium plated fancy type bib cock of 15mm bore complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down, of size 300mm x 300 mm complete all as specified & directed by the Engineer-in-Charge.
Supply and fixing in repairs brass Chromium plated angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed
Supply and fixing in repairs brass Chromium plated fancy type15 mm bore stop cock with long shank & as concealed type complete all as specified and directed
Supply and fixing in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fixing vitreous china wash down water closet pan (pedestal pattern) white including PVC sheet cover, closed pattern with flat bottom, and cover MS chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new MS brackets excluding taps waste pipe & plug, but including MS bracket etc complete all as specified and directed.
Supply & fixing in repairs Pillar taps fancy type, brass chromium plated, 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed by the Engineer - in - Charge
Supply and fixing in repairs brass chromium plated hand spray (Health faucet) with flexible pipe length not less than 1.00 metre fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed.
Supply & fixing factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC and edges will be painted to match with prelam sheet reinforced with M.S. tube, fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing factory Made Solid prelaminated PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design wood grain both sides complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing stainless steel barrel tower bolt of size 150mm of extruded section & fixed in positions complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed.
Supply & fixing 125mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed.
Supply & fixing stainless steel handles of size 125mm, complete all as specified and directed.
Demolition and breaking up 75/110/150/200/250 mm bore drain pipes, soil, waste and rain water pipe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, in trenches and in floors including connections and fittings complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) bend any radius of 75 mm bore provided with access door complete all as specified & directed by the Engineer-in-Charge
Supply & fixing PVC (SWR) bend any radius of 110 mm bore provided with access door complete all as specified & directed by the Engineer-in-Charge
Supply & fixing PVC (SWR) junction of bore 75 mm dia, single (single T) equal or unequal with access door including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) junction of bore 110 mm dia, single (single T) equal or unequal with access door including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) vent cowl of bore 110 mm dia complete all as specified & directed by the Engineer-in-Charge
Supply & fixing PVC (SWR) P/S trap of 125/110 mm bore including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) floor trap of 75 mm dia outlet, plain with grating including jointing with solvent cement including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing PVC (SWR) gully trap of 125/110 mm dia outlet, plain with grating including jointing with solvent cement including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified & directed by the Engineer-in-Charge.
Supply and fixing in repairs tubular towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge.
Supply and fixing in repairs of brass Chromium plated paper holder for EWC complete all as specified and directed.
Supply and fixing in repairs brass Chromium plated fancy type soap dish complete all as specified and directed.
Supply and fixing in repairs chromium plated grating of size 100 mm dia complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 3 m in depth and getting out in any type of soil complete all as specified and directed.
Material and labour for hardcore of broken stones or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Material & labour for PCC 1:4:8, type D-2, (using 40 mm graded stone aggregate), as in foundations, filling and mass concrete complete all as specified & directed by the Engineer-in-Charge.
Material & labour for 100 mm thick PCC 1:2:4, type B-1, (using 20 mm graded stone aggregate), as in foundations, filling and mass concrete complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Mild steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Material & labour for formwork (Flat rough finished surfaces of concrete) to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Reinforced Cement Concrete M-25 design mix (using 20 mm graded stone aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Squared rubble walling Jodhpur type built in cement mortar 1:6 regular coursed, well bonded, bedded and solidly hearted complete all as specified and directed.
Material & labour for rendering 15mm thick in cement mortar 1:4, on brick work or concrete surfaces, surface finished smooth and even without using extra cement complete all as specified & directed by the Engineer-in-Charge.
Material & labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching and similar works including weathering, slightly rounded or chamfered angles and throating etc including necessary formwork complete all as specified and directed by the Engineer-in-Charge.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in any tpe of soil complete all as specified and as directed.
Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and as directed.
Supply and fixing anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified complete all as specified and as directed.
Supply and fixing 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.
Supply & fixing Aluminium Anodized powder coated (Thickness of powder coating not less than 50 micron) aluminium frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc complete all as specified & directed by the Engineer-in-Charge.
Supply & fixing anodised aluminium, powder coated of any colour (Thickness of powder coating not less than 50 micron), window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specified & directed by the Engineer-in-Charge.
Material and labour for 5 mm thick Sheet glass, ordinary quality and glazing with oil putty or aluminium beading, in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.
Material & labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed type) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as directed by the Engineer-in-Charge.
Supply and fixing 12 mm thick solid PVC ply of first quality of both side wood grain printed, fixed with screws, solvent cement /adhesive complete all as specified and as directed.
Supply and fixing for four levers brass locks, cupboard/glass doors, grade I, size 50 mm complete all as specified and as directed.
Supply & fixing stainless steel handles of 110 mm size as per approved sample for kitchen cabinet shutter complete all as specified and directed.
Supply and fixing sliding telescopic channel high grade mild steel, bright finish or electro-galvanised of size 20" as per approved sample complete all as specified and directed.
Supply and fixing 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
Material & labour for 18 mm thick marine grade plywood (specifications as per IS 710:200) used in partition, cupboards complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, light shade, area of each tile exceeding 0.36 sqm but not exceeding 0.42 Sqm as in floors etc set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified & directed by the Engineer-in-Charge.
Material & labour for Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, light shade, area of each tile exceeding 0.36 sqm but not exceeding 0.42 Sqm as in skirting/dado set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 10 mm thick rendering in cement mortar (1:4) complete all as specified & directed by the Engineer-in-Charge.
Material & labour for squared rubble walling Jodhpur type built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified and directed.
Om Trading Corporation
VIKAS CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .