REPAIRS TO FENCING/ COMPOUND WALL/ GATES AND DRAIN AT PANGODE MILITARY STATION UNDER GE(ARMY) TRIVANDRUM

Amount

Demolition of brick work/stone/block masonry built in cement mortar all as directed .

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 all as directed.

All as per item No 2 above but except Bricks.

M&L for Walling of random rubble uncoursed, well bounded, bedded and solidly hearted and built in CM 1:6 all as directed.

All as per item No 4 above but except stones.

M&L Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 all as directed.

All as per item No 6 above but except blocks.

Taking down of cement plaster incl hacking out of joints, hacking for key, scrubbing down with water etc all as directed.

M&L for rendering 15 mm thick in cement plaster on fair faces of brick work/concrete in cement mortar 1:4, finished even and smooth with out using extra cement all as directed.

M&L for Applying two coat of acrylic exterior emulsion water proofing painting over a coat of primer including prepartion of surfaces of wall all as directed

M&L Flush pointing in cement mortor 1:4 on random rubble masonry, uncoursed all as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping all as directed.

M&L for Pre-cast concrete type B1 1:2:4 using 20 mm graded stone aggregate as in cover slab including necessary form work set in CM 1:4 all as directed.

Dismantling RCC posts or struts any section including taking out embedded portion complete and making good distrubed ground all as directed.

Demolition of cement concrete of any description in any position not otherwise specially provided all as directed .

M&L for Plain cement concrete 1:4:8 Type D2, using 40 mm graded stone aggregate as in foundation all as directed.

M&L for Providing reinforced cement concrete 1:2:4 Type B1using 20 mm graded aggregate, in pre-cast fencing posts, struts etc average sectional area exceeding 100 Sqcm and not exc 250 Sqcm with or without chamfered angle and flat all as directed

Dismantling of old rusted wire for fixing new barbed wire all as directed

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacings and staining and fixing to RCC post including tying or securing at crossings with and provision of galvanised mild steel wire, staples, steel pins etc all as directed.

M&L deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.

All as per item No 20 above but 5 mm to 8 mm dia for stirrups, spacers & binders

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as directed.

S&F Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as directed

M&L for preparation of new steel surfaces and applying two coats of synthetic enemel paint over a coat of redoxide zinc chrome all as specified and directed

Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frame) all as directed

S&F Aluminum door/windows using power coated aluminum section, including necessary joining cleats,glazing clips, rubber neoprene packing, handles aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) complete all as directed.

S&F Door closer hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specified .

S&F Brass Mortice lock of 4 Levers, vertical type, of size 100mm all as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) all as directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to fimber frame work all as directed.

M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass or all as specified .

Taking down existing aluminium door frames including shutter exc. 1.5 Sqm but not exc. 4 Sqm and re-fixing the same opening after carrying the necessary repair as directed .

Shilpa Engineers and Contractors

CHITHRANI TRADERS

Archana Transport