SPL REPAIR OF BLDG NO P818 IN RO 12 CORPS ZONE WKSP AND PROVN OF TOILET BLOCK IN BLDG NO P 924 OF 58 ARMD REGT IN ARMY AREA UNDER AGE BR II OF GE ARMY CENTRAL JODHPUR (9085/E8)

Amount

Note:- All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly

B/R WORK :- Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MD land, complete all as directed.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MD land, complete all as directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc., complete all as specified and as directed.

M&L for 15-18mm thick Udaipur green marble machine cut in cooking platform laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges, complete all as specified and as directed.

M&L of 20-25mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing, complete all as specified and as directed.

M&L for coloured glazed ceramic tiles (premium quality) 300mmx450mmx6mmthick over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE), complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 400mmx400mmx6-7 mm thick as per IS 13712 Grade II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed by Engr -in-charge.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement, complete all as specified and as directed.

M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc., & finished even & smooth, complete all as specified and as directed.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

M&L for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and as directed by Engr-in-charge.

M&L for three coats of white wash including preparation of new surfaces on walls, complete all as specified and as directed.

M&L for three coats of white wash including preparation of new surfaces as on ceilings, complete all as specified and as directed.

M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over one coat of primer, complete all as specified and as directed.

M&L for one coat of white wash including preparation of old surfaces as on ceilings, complete all as specified and as directed.

M&L two coat of cement based paint on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation, complete all as specified and as directed.

M&L one coat cement based paint on old plastered/ unplastered surfaces of wall & including preparation, complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each, complete all as directed.

Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc 4.0sqm each, complete all as directed.

Taking down shutters of any description area exc 1sqm and n.exc 2 sqm each, complete all as specified and as directed.

S&F PVC door frame of size 50mmx 47mm made out of 5mm plain PVC sheet reinforced with MS square tube, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 Mix (using 20mm graded crushed stone aggregate) as in bed block for hold fast including necessary form work, complete all as specified and as directed.

Taking down of steel window and ventilators, complete all as specified and as directed.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded, complete all as specified and as directed. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed.

S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and as directed..

Supply and fabrication of Mild steel guard bars, grills, grating, and similar work and welded to window frames, door frames (made up of angle), balcony railing confirming to FE 290, gde E-165 etc, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and as directed.

S&F factory made PVC shutter 30 mm thick (style)consisting of frame made out of MS tube for top and bottom rails. MS frmae shall be covered with heat moulded plain color PVC channel having a PVC sheet for top rail of 20mm width width stuck in side with solvent cement for stiles and plain color PVC sheet for top rail lock rail on other side and as gap insert for top rail and bottom rail. Paneling of plain color PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slovent cement, complete all as specified and as directed.

S&F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed.

S&F of mild steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed.

S&F of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt, complete all as specified and as directed.

S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and as directed by Engr-in-charge.

S&F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts (four on bolt plate and two on stapple plate), complete all as specified and as directed.

S&F 150mm double action spring hinge, brass with phosphor bronze wire spring bright polished, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and as directed.

S&F for 3mm thick plain sheet glass ordinary quality & glazing with oil putty in square n.exc 0.50sqm ineach pane, complete all as specified and as directed.

S&F for 4 mm thick figurred, pin headed glass ordinary quality & glazing with oil putty in square n.exc 0.50sqm ineach pane, complete all as specified and as directed.

M&L for preparation of new steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of old steel suface over 10cm width or girth and applying one coat of synthetic enamel paint including preparation of surface, complete all as specified and as directed.

M&L for preparation of new wooden surface 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of old wooden surface 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed.

Taking up or down GI steel /CPVC water tubing 15 mm bore and connection, including cleaning for refixing or remove to site, complete all as specified and as directed.

Taking up or down GI tubing/CPVC 20/25 mm bore and connection, including cleaning for refixing or remove to site, complete all as specified and as directed.

S&F CPVC tubing having outer dia 20mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor, complete all as specified and as directed.

S&F CPVC tubing having outer dia 25mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor, complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and as directed.

S&F in repair of bib cock 15mm dia, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repairs angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed.

S&F stop valves cast copper alloy (ISI marked) CP screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair, complete all as specified and as directed.

S&F stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 25mm bore of iron pipe or union and fixed in repair, complete all as specified and as directed.

S&F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed.

S&F 600mm x 450mm bevelled edge mirror (Modiguard/ Saint Gobain) glass 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

S&F tubular towel rail 20mm dia chromium plated `D' type 60cm long with bracket and fixed, complete all as specified and as directed, complete all as specified and as directed.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end (As approved by Engr -in-charge), complete all as specified and as directed.

Demolition of reinforced cement concrete including cutting to reinforcement as required to facilitte demolition as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimneys and similar suspended work, complete all as specified and as directed.

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and as directed.

S&F of Vitreous China wash basin size 450 x 300mm with padestal, white, flat back, including CP waste coupling, waste pipe, PVC Connection 300 mm long, brackets, complete all as specified and as directed.

S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor, complete all as specified and as directed.

Dismantaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc., complete all as directed.

Dismantaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc., complete all as directed.

Supplying and laying of 75 mm dia UPVC pipes SWR & Plain UPVC SDR-11 fittings in trenches (with all fitting), complete all as specified and as directed.

Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR-11 fittings in trenches (with all fitting), complete all as specified and as directed.

Supplying and laying of 75 mm dia UPVC pipes SWR fittings on walls / ceiling or laying in floors (with all fitting), complete all as specified and as directed.

Supplying and laying of 110 mm dia CPVC pipes SWR fittings on walls / ceiling or laying in floors (with all fitting), complete all as specified and as directed.

S&F 75 mm bore UPVC bends any radius with oval acess door, complete all as specified and as directed.

S&F 110 mm bore UPVC bends any radius with oval acess door, complete all as specified and as directed.

S&F for 100mm dia UPVC cowls, diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.

M&L for UPVC branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore, complete all as specified and as directed.

M&L for UPVC branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore, complete all as specified and as directed.

S&F in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed, complete all as specified and as directed.

S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc., complete all as specified and as directed.

S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts, complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor , hard standing flooring finished even and smooth without using extra cement, complete all as specified and as directed.

M&L 50mm thick PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bags finished complete including forming joints in 2 mtr interval and filled with bitumen mastic all as specified.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land, complete all as specified and as directed.

M&L for roof treatement in the following stages, complete all as specified and as directed :- (a) First Couse : Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified. (b) Second Couse : Applying of coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third Course : Layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer folm 20 micron both sides thickness 1.5 mm having weight 2.25 Kg/Sqm. (d) Fourth Couse : Applying a coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) over roof for making good depression/undulation and as in roof kerb to match the existing, complete all as specified and as directed.

Dismantling existing water tank of capacity exceeding 500ltrs and not exc 1000 ltrs and removing from site, complete all as directed.

S&F 1000 Ltrs Rotational moulded polyethylene water storage tank triple layer white colour (ISI Marked) (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed Including 20mm bore brass ball valve high pressure with polythene float, complete all as specified and as directed.

"Supply only" integral water proofing compound (ISI marked), complete all as specified and as directed.

Demolition of stone masonry /block walling built in cement mortar and removing debris out of MD Land, complete all as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

M&L for precast cement concrete solid building blocks type B-1 1:2:4 (using 20mm graded crushed stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete all as specified and as directed.

M&L for providing precast cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4, complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D2 (using 40mm gradded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for 25mm thick Sand filling as a cushion under paver block, complete all as specified and as directed.

S&F factory made Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with no pigment, complete all as specified and as directed.

S&F machine pressed precast cement concrete blocks (interlocking pavers) any shape & size confirming to IS_15658-2006) of 60mm thick M-35 Grade with 6mm top layers of ante abrasive rubberised material laid over and including 25mm thick sand cushion. The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc., complete all as specified and as directed.

S&F 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed.

M&L for cleaning the existing reinforcement of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and as directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth, complete all as specified and as directed.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed.

S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F Soap Dish CP fixed with screws, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc., (removing demolished material outside MD land), complete all as specified and as directed.

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed.

Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces, complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.

M&L RCC design mix M-25 as in slab supported on wall, roof slab, chijja and in shelve etc., complete all as specified and as directed.

M&L RCC M-25 (design mix ) as in beam, cantilevers, bressummers, lintel overone meter span, complete all as specified and as directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F TMT bars 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint, complete all as specified and as directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext, complete all as specified and as directed by Engr -in- Charge.

M&L for salt glazed stoneware drain pipes 150mm dia (internal) grade 'A' laid in trenches and jointed in CM(1:1) including taking down old unserviseable pipe, complete all as specified and as directed.

S&F Reinforced concrete pipes 150mm dia, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for cement concret (1:3:6) type C-2, (using 40mm graded crushed stone aggregate) bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork, complete all as specified and as directed.

Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each, complete all as specified and as directed.

Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point, complete all as directed by Engr -in- Charge.

S&F 35 mm thick Fancy type plain framed moulded on solid (for each side) panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed by Engineer-in-Charge

S&F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge in SSR Pt I-2009section 8 clause 8.24 (a), complete all as specified and as directed.

Removing of existing filling in sunken floor o wc/bath/kitchen and repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with PC than painting with bitumen 30/40 over a coat of bitumen primer putting 50 micron polythene than filling with pcc 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 50 mm bore GI water pipe light grade spout, complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in filling under pressed steel door frames & hold fasy blocks etc., complete all as specified and as directed.

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straid portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.

M&L for mild steel framed work doors ,brackets for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.

S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed.

S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed.

S&F 500 Ltrs cap rotational moulded polyethylene water storage tank triple layer white colour (ISI Marked) (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed Including 20mm bore brass ball valve high pressure with polythene float, complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on stone masonary surfaces , finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC,pier caps, bed blocks, for hold fast etc. incl. necessary form work, complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling of manholes and in and in haunching against the sides of the pipe on existing PCC bed, complete all as specified and as directed.

Preparation of new stone surfaces and applying two coats of cement based paint on new concrete walls, complete all as specified and as directed by Engineer-in-Charge.

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface, complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8, as in sub base to floor, complete all as specified and as directed.

Vitreous China urinals, bowl type half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

E/M WORK Taking down carefully copper/aluminium point wiring for light, fan, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc., complete all as directed.

Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FR LSH) insulated unsheathed cable confirming to IS-694,1100 Volts grade (ISI Marked) ( class V conductor) in and including PVC conduit (ISI Marked) not less than 20 mm dia with accessories fixed on surface of wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall but including 3.00 mm thick plastic laminated sheet top cover (ISI marked HYLEM sheet Make: Anchor ) and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust Fan point controlled by one way switch.

(c) One socket outlet 3 pin 5/6 Amps on same board

(d) One socket outlet 3 pin 5/6 Amp on independent board

All as per item No. 140.00 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board, complete all as specified and as directed.

S&F switch flush type single pole one way 5 Amp (ISI Marked), complete all as specified and as directed.

S&F switch flush type single pole one way 15 Amp (ISI Marked), complete all as specified and as directed.

S&F Angle Lamp holder metal cased insulated body of brass with back plate suitable for batten fittings, complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 pin, 5 Amp flush type (ISI marked), complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type (ISI Marked), complete all as specified and as directed.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable, complete all as specified and as directed. Make : Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20/ Havells Cat No LHEXBHP7PN1W020/ Philips Cat part No-BN150W LED20S

S&F 1X10watt LED 230 volt 50 Hz bulk head luminaries Light fittings, with complete including connecting up with PVC insulated and sheathed, 1100 volts grade, flexible, multistranded 1.0 sqmm copper conductor three core cable, complete all as specified and as directed. Make : Bajaj/ Philips/ CG

S&F LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V, complete all as specified and as directed. Make : CG Cat Part No. LSTS-25-CDL or equivalent in Philips/ Havell's Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of 1.5 Mtr length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect.

S&F Ceiling rose, 3 terminal/PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F socketed stepped type electonic fan regulator flush type on the existing phenolic laminated sheet etc., complete all as specified and as directed.

S&F Ceiling fan 1200mm sweep, 5 starated and necessary electric connection, complete all as specified and as directed by Engineer-in-Charge. Make:Bajaj/ Crompton/ Havell's

S&F Exhaust fan 300mm, sweep, Plastic body, Noise less, and necessary electric connection, complete all as specified and as directed by Engineer-in-charge. Make:Bajaj/ Crompton/ Havell's

M&L sub main wiring with 6 Sqmm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through existing PVC / steel conduit and making good the distrurbed surface of wall incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as unit length.

S&F distribution board in sheet metal encl when MCB to be used with 200 Amps rated copper bus bar , company prewired , IP 43confirming to relevant IS SPN 8 way, complete all as specified and as directed.

S&F MCB single pole 5 to 30 Amps, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

S&F MCB SPN 40 Amps, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc., complete all as specified and as directed.

M&L for disconnecting electric supply, taking down fan/ Exhaust Fan , dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins complete all as specified and as directed by Engineer-in-Charge.

Supply,laying and fixing only along the poles,floor, ground or passing through walls etc jointing and testing LT Cross Linked Polythene Insulated galvanised steel strip armoured electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC of cross sectional area 70 sqmm x 3.5 core (ISI marked), complete all as specified and as directed.by Engg-in-charge.

S&F sheet metal enclosures for DB V-TPN for incorporating MCB 100 to 160 Amp as incoming & MCBs, TP, 4 way as outgoing, IP-43 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, complete all as specified and as directed.

S&F MCB 100 Amps 25 KA including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete. Make : Legrand/ ABB/ Schneider

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

HINDUSTAN TRADING COMPANY

Jai Doulat Construction Co

M/S KAUTILYA GARG

Harsh Enterprises

MOHIT ENTERPRISES

BEYLIM INFRA

GANGADHAN ENTERPRISES