97794 LAC-ADS-Guruvayur LA,2025-26, LAC- ADS,Ward-9,Kadappuram GP,Anganwadi No.2Building Construction ,Chavakkad BP-In Chavakkad BP-General Civil Work

Work Name:LAC-ADS-Guruvayur LA,2025-26, LAC-ADS,Ward-9,Kadappuram GP,Anganwadi No.2Building Construction ,Chavakkad BP-In Chavakkad BP-General Civil Work

畬楤杮猠牴瑵楴杮‬瑥⹣愠摮爠浥癯污漠⁦潦浲映牯场慥桴牥猠慨敤‬桃橡慪ⱳ挠牯敢獬攠捴Ⱞ椠据畬楤杮攠杤獥‘㔀㤮㌮䌺湥整楲杮愠摮猠畨瑴牥湩⁧湩汣摵湩⁧瑳畲瑴湩Ⱨ攠捴‮湡⁤敲潭慶景映牯潦㩲畓灳湥敤⁤汦潯獲‬潲景ⱳ氠湡楤杮ⱳ戠污潣楮獥愠摮愠捣獥⁳汰瑡潦浲 㔀㤮㘮䌺湥整楲杮愠摮猠畨瑴牥湩⁧湩汣摵湩⁧瑳畲瑴湩Ⱨ攠捴‮湡⁤敲潭慶景映牯潦㩲潃畬湭ⱳ倠汩慬獲‬楐牥ⱳ䄠畢浴湥獴‬潐瑳⁳湡⁤瑓畲獴’㔀㤮ㄮ⸶㨱敃瑮牥湩⁧湡⁤桳瑵整楲杮椠据畬楤杮猠牴瑵楴杮‬瑥⹣愠摮爠浥癯污漠⁦潦浲映牯਺摅敧⁳景猠慬獢愠摮戠敲歡⁳湩映潬牯⁳湡⁤慷汬啳摮牥㈠‰浣眠摩ե敭牴镥
⸵⸲㨲敒湩潦捲摥挠浥湥⁴潣据敲整眠牯湩眠污獬⠠湡⁹桴捩湫獥⥳‬湩汣摵湩⁧瑡慴档摥瀠汩獡整獲‬畢瑴敲獳獥‬汰湩桴愠摮猠牴湩⁧潣牵敳ⱳ映汩敬獴‬潣畬湭ⱳ瀠汩慬獲‬楰牥ⱳ愠畢浴湥獴‬潰瑳⁳湡⁤瑳畲獴攠捴‮灵琠瑯映潬牯映癩⁥敬敶硥汣摵湩⁧潣瑳漠⁦散瑮牥湩Ⱨ猠畨瑴牥湩Ⱨ映湩獩楨杮愠摮爠楥普牯散敭瑮㨠㨱⸱㨵⠳ㄠ挠浥湥⁴›⸱‵潣牡敳猠湡⁤›″牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⁥敤楲敶⁤牦浯渠瑡牵污猠畯捲獥쨩
⸵㨳敒湩潦捲摥挠浥湥⁴潣据敲整眠牯湩戠慥獭‬畳灳湥敤⁤汦潯獲‬潲景ⱳ栠癡湩⁧汳灯⁥灵琠㔱₰氠湡楤杮ⱳ戠污潣楮獥‬桳汥敶ⱳ挠慨橪獡‬楬瑮汥ⱳ戠湡獤‬汰楡楷摮睯猠汩獬‬瑳楡捲獡獥愠摮猠楰慲瑳楡⁲慣敳⁳灵琠汦潯⁲楦敶氠癥汥攠捸畬楤杮琠敨挠獯⁴景挠湥整楲杮‬桳瑵整楲杮‬楦楮桳湩⁧湡⁤敲湩潦捲浥湥ⱴ眠瑩ㅨㄺ㔮㌺⠠‱散敭瑮㨠ㄠ㔮挠慯獲⁥慳摮⠠潚敮䤠䥉 搠牥癩摥映潲慮畴慲潳牵散㩳㌠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺†敤楲敶⁤牦浯渠瑡牵污猠畯捲獥⸩Î㔀㈮⸲㨶瑓敥敲湩潦捲浥湥⁴潦⁲⹒⹃⁃潷歲椠据畬楤杮猠牴楡桧整楮杮‬畣瑴湩Ⱨ戠湥楤杮‬汰捡湩⁧湩瀠獯瑩潩湡⁤楢摮湩⁧污潣灭敬整甠瑰汰湩桴氠癥汥桔牥潭ⴠ䴠捥慨楮慣汬⁹牔慥整⁤慢獲漠⁦牧摡⁥敆㔭〰⁄牯洠牯ࡥ楫潬牧浡đ㔀⸰⸶⸱㨵潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳ 慆瑣牯⁹慭敤 景猠穩⁥〳㉸砰〲浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸倠牡⁴⁉景ㄠ㜹‹潦⁲畳数⁲瑳畲瑣牵⁥灵琠汦潯⁲睴敬敶桴捩湫獥⁳〲浣愠摮愠潢敶椠㩮䌠⁍㨱‶ ‱散敭瑮㨠㘠挠慯獲⁥慳摮 瑥⁣潣灭敬整@㄀⸳⸱㨱㈱洠散敭瑮瀠慬瑳牥漠⁦業㩸㨱‴ ‱散敭瑮㨠㐠映湩⁥慳摮䀩㌱ㄮ⸶㨱‶浭挠浥湥⁴汰獡整⁲景洠硩ㄺ㌺⠠ㄠ挠浥湥⁴›″楦敮猠湡⥤Š㄀⸳㌴ㄮ䄺灰祬湩⁧湯⁥潣瑡漠⁦慷整⁲桴湩慮汢⁥散敭瑮瀠楲敭⁲景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥湯眠污畳晲捡㩥慗整⁲桴湩慮汢⁥散敭瑮瀠楲敭蝲㌱㘮⸰㨱慗汬瀠楡瑮湩⁧楷桴愠牣汹捩攠畭獬潩慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡㩥睔牯洠牯⁥潣瑡⁳湯渠睥眠牯⸹㠴ㄮ债潲楶楤杮愠摮映硩湩⁧⹍⹓䜠楲汬⁳景爠煥極敲⁤慰瑴牥湩映慲敭⁳景眠湩潤

ws etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by weldingkgl
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works—
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.¬
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completeû
8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.H
17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap each?8.2.2.1:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab upto 0.50 sqm´
17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid¤OD234141/2025-2026:Supplying and fixing 20mm thick ready made PVC door (80*200cm) with frame 50*42 mm including conveyance,cost of fitting , labour for fixing etc.1 nosÕ50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm24
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wallÓ50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workS18.15.1:Providing and fixing brass bib cock of approved quality :15 mm nominal borew18.17.2:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore¤21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)ˆ
21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)o
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack woodn
50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood_
50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack woodÚ9.97.3:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mmnoÜ9.100.2:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm650.9.15.1:Supplying and fixing 200 mm Aluminium aldrop:50.9.15.5:Providing and fixing iron hooks and eyes: 100 mmª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.B
51.19.ST1:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of b

ed shall be paid separately) 1. Below 15 flush capacity
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre¹
OD234414/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm aggregate , filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Modified data of 16.681 sqmOD234143/2025-2026:Supplying and fixing 18mm thick granite name board of any colour including lettering labour for fixing carriage etc complete