Repair/replacement of Sanitary /bath fittings ,Plumbling ,flooring ,plastering ,joinery ,false ceilling and wall paneling etc at 42 Inf Bde ,42 Inf Bde sig coy , Ascon node under AGE B/R-I of GE Dehradun.

Amount

Taking down Chowkats any description exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified and directed.

Supply and fix 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Material and labour for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

Supply and fix 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

Supply and fix 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

Supply and fix in repair 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix stainless steel handles 150 mm long one piece and fixed with screws/welded to frame , complete all as specified and directed.

Supply and fix stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed.

Supply and fix floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

Supply and fix in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks staging and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole & including dismantling old section complete all as specified and directed.

Supply and fix mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane.complete all as specified and directed

Material and labour Framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' .including dismantling complete all as specified and directed

Dismaltling of roof AC sheeting any type (corrugated/semicorrugated, etc) in roof covering complete all as spfd and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified and directed

Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work).

Supply and fix mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O complete all as specified and as directed.

Material and labour for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

Supply and fix in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix in repair of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Supply and fix welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as spfd and directed.

Supply and fix in repairs powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

Supply and fix repair Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed. (Note : Sample/ design approved by Engineer-in-charge)

Material and labour for cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 Cm in girth.complete all as specified and directed.

Supply& fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down complete all as specified and directed.

Supply and fix in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Material and labour 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive the screed including demolition complete all as specified and directed.

Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

Material and labour cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement including demolition complete all as specified and directed

Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.

Material and labour Glazed ceramic tiles coloured size of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed

Material and labour non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed

Material and labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of tiles complete all as specified and directed

Material and labour for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

Material and labour brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

Material and labour returing filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removal of excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Material and labour brick work with sub class ’B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Material and labour rendering 15mm thick in patches in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement including taking down coplete WPC will be measured and paid separately.

Material and labour rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) all as specified and directed.

Material and labour rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, finished fair faces of brick/concrete surfaces even and fair without using extra cement . WPC will be measured and paid separately. all as specified and directed.

Material and labour 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces including taking down complete all as specified and directed.

Material and labour for preparation of new plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

Material and labour for two coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour for preparation of surface and applying one coat of floor paint on old surface of floors all as specified and directed by Engr-in-Charge.

Material and labour one coat of white wash on including preparation of existing surfaces of ceiling complete all as specified and directed by Egnr-in-Charge.

Material and labour one coat of white wash on including preparation of existing surfaces of walls complete all as specified and directed by Egnr-in-Charge.

Material and labour one coat of oil bound distemper in any tint on walls complete all as specified in SSR Part I including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

Material and labour one coat of cement base paint on external wall surfaces complete all as specified in SSR Part I including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed.

Material and labour preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

Supply and fix in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

Supply and fix 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified, and directed .

Supply and fix hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing complete all as specified and directed.

Supply and fix Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed.

Supply and fix Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fix in reapair 75 mm PVC floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 (1;2;4) complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

Supply and fix in repair looking mirror 450x600MM mounted on decorative type PVC frame fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified.

Supply and fix in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed.

Supply and fix in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed.

Supply and fix 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Supply and fix in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .

Supply and fix in repair PVC waste pipe for urinal flexible type with 50 mm dia coupler complete all as specified and directed .

Demolition and breaking up drain pipes of 100/75 mm bore (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Supply and fix in repair 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete all as specified and directed.

Supply and fix in repair UPVC (SWR) bend, 75 mm bore' complete all as specified.

Supply and fix in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 75 mm bore with access door complete all as specified.

Supply and fix in repair UPVC (SWR) bend, junction single, (Single T) ,110 mm bore' complete all as specified.

Supply and fix in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified.

Supply and fix in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI pipe.grouted in PCC 1:2:4 complete all as specified and directed.

Material and labour taking out old treatment from existing RCC roof and cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under:- (a) Providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:3 over roof surface mixed with & including WPC as per manufacturers instructions. (b) Preparation of surface and applying one coat of polymeric primer @ 0.30 kg / sqm. (c) Supply & providing APP based polymeric water proofing membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed. (d) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.20 Kg/Sqm shall be applied. NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

Supply and fix in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and directed.

Material and labour two coat of damp proof paint any tint on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. Make : Berger/Asian

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item).

Cleaning of sewage pipe line 150 mm to 200 mm dia pipe and by rodding or by bamboo & removing the sludge/waste mtrl and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item).

Material and labour for dewatering and desludging of septic tank/sokage well of any size and depth by manually/mechanically (solid contents if not removed by mechanically should be removed by manually) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Supply and fix in replacement MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specrified & directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed. Note :- (i) The contractor/Supervisor collect the complaints from the JE/MCM through JOB Card and rectify the complaints. (ii) The contractor/Supervisor should submit the Job Card duly signed by the user. (iii) RAR/Final bill will be paid only after verifying of workdone by the Engr-in-Charge

Material and labour point wiring with 3 runs of 1.5 Sqmm (colour code as per IE Rules) FRLS, PVC insulated, unsheathed, single core, 1100 Volts grade, multistranded copper conductor cable/Wire in and including concealed rigid PVC conduit medium grade and green wire connected to common earth dolly, and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch complete all as specified and directed.

All as per Item No 102 here-in- before but one 3 pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 102 here-in- before but one 3 pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 102 here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 102 here-in- before but One light point controlled with switch 2 way complete all as specified.

All as per Item No 102 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 102 here-in- before but wiring drawing through Surface PVC conduit complete all as specified and directed.

All as per Item No 108 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 108 here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 108 here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 108 here-in- before but One light point controlled with switch 2 way complete all as specified.

All as per Item No 108 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 102 here-in- before but wiring drawing through exisitng conduit complete all as specified and directed.

All as per Item No 114 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 114 here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 114 here-in- before but One bell/buzzer point controlled by bell push complete all as specified.

All as per Item No 114 here-in- before but one two way point controlled with switch 2 way complete all as specified.

All as per Item No 114 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 102 here-in- before but wiring drawing through Case & Caping complete all as specified and directed.

All as per Item No 120 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 120 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 120 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 120 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

Supply and fix in repair Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed.

Supply and fix in repair Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fix in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified.

Supply and fix in repair switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

S &F in repair ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.

Supply and fix in repair calling bell type AC 230 Volt single pole complete all as specified and directed.

Supply and fix Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and as directed.

All as per item No 135 here in before but 3 module complete all as specified and directed.

All as per item No 135 here in before but 4 module complete all as specified and directed.

All as per item No 135 here in before but 6 module complete all as specified and directed.

All as per item No 135 here in before but 8 module complete all as specified and directed.

All as per item No 135 here in before but 12 module complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 06 amp single pole complete all as specified and directed.

Supply and fix Modular switch 2 way 06 amp single pole complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 16 amp single pole complete all as specified and directed.

Supply and fix in repair modular socket outlet 6/16A- 5 pin combined of 02 module complete all as specified and directed.

Supply and fix in repair modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed.

Supply and fix in repair moduar bell push 6 Amp 1 module complete all as specified and directed.

Supply and fix in repair modular fan step regulator 120 W-2 module complete all as specified and directed.

Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed.

Supply and fix in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified.

Supply and fix in repair round shaped LED downlights of capacity 12 Watt suitable for fixing in false ceiling with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing.

Material and labour for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 155 here-in-before but with 3 runs(N+P+E) of 2.5 Sqmm single core copper FRLS conductor . Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

All as per item No 155 here-in-before but with 3 runs(N+P+E) of 4 Sqmm single core copper FRLS conductor .Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

All as per item No 155 here-in-before but with 6 runs(3 runs P+N+ 2 run Earth) of 6 Sqmm single core copper FRLS conductor and PVC conduit not less than 24 mm dia. Note:-6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Material and labour for replacement of old rusted sunken box with new 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories and making the good disturbed surface with plastering and white washing etc incl taking downcomplete all as specified and directed .

Material and labour for replacement of old u/s hylum sheet cover fixed with brass screw complete with all accessories and making the good disturbed surface with plastering and white washing etc incl taking downcomplete all as specified and directed .

Supply and fix in repair Distribution board VTPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in repair MCCB 415 Volts, 63 Amps, rating 4 Pole , all as specified and directed

Supply and fix in repair MCCB 415 Volts, 100 Amps, rating 4 Poleall as specified and directed

Supply and fix in repair Distribution board SPN 8 Way double door, for mounting MCBs isolator, IP 43 protection. Note:- DB and MCCB/MCB shall be of same make.

Supply and fix in repair 415V 10KA 'C' curve MCB of TPN 40 to 100 Amps complete all as specified and directed.

Supply and fix in repair SP 6 to 32 Amps rating 240V, 10KA 'C' curve MCB complete all as specified and directed.

Supply and fix in repair SPN 25 to 63 Amps rating 240V, 10KA 'C' curve MCB complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Alankar Traders

M/s Teg Singh Negi

SS TRADERS

M/S C S AITHANI

Laxmi traders