Rennovation and upgradation of Rajaram circle at Sursagar,Jodhpur

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Armoured Cable

50 mm squire 4 core armured

Providing & Fixing of ISO certified company made TP&N 415 V AC-23A front handle operated switch disconnector fuse unit, cubical type, with metallic enclosure, as per PWD specification for electrical Works conforming to IS/lEC 60947-3 : 1999 with HBC fuses including making connections with lugs, testing etc as required. Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 100/125 A rating

Supply & fabrication steel structure with MS channel / angle / joist / ISMB /sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer &two coat of enamel paint etc. as required complete in all respect. All as per preapproved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

2.5 Sq.mm 3 core flat / Round

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

1.5 Sq.mm 4 core

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Add extra in item no. 11.1 to 11.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix.

Earth work in excavation/ by mechanical means (Hydraulic Excavator) / Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed:

Transportation of excavated earth over 5 km and above

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Plaster on new surface on wall in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick

Supplying and fixing ashlar coping moulded and counter slopped 7 to 10 cm. thick (2 line dressed) (normal length of single piece not less than 0.90m) (a) Soorsagar or eqvt. White Ashlar

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs

Job work for Engraving design or matter by CNC machine on granite tile and fill engraved part with golden / silver color

Providing of IP66 protected High power LED Flood light system with pressure die cast housing,with suitable lenses on LED to achieve various beam angles,System lumen efficacy>=110lm/w,Driver shall be high efficiency having efficiency>85%,CRI>70,Power factor>0.95,System life of 50,000 Burning Hours with 70%of Initial Lumens maintained.Light output in warm white

LED Flood Light 50W(Warm White/Green)

LED Flood Light 100W(Warm White)

Supply and Fixing of 10A Capacity panel box having clock Timer, Air Connector, MCB, Connection Strip to gave electricity Supply (Size 600*500*200mm) as per direction of Engineering Incharge

Supply and fixing of fasting acting high pressure and high Flow Horizontal Submersible pump 3 phase of 10 Hp for fountain use only (approx discharge 1950 LPM on 12mtr head) With SS 304 nut bolts, rubber washers as per direction of Engineering Incharge

SS 304 grade 5'' to 4'' dia with 3mm min. wall thichness pipe rings of difference aprox 7m dia (less 2 meter length of enterence) with light stands and accessaires.

SS 304 grade with 3mm min. wall thickness 5'' to 4'' dia Manifold of 2 mtr length approx. with pump stands, Valve and accessories.

Supply and fixing of 3" water coulomb nozzles

Supply and fixing of Foaming nozzle with brass bowl joint made of enginneering plastic parts and Aluminium material.

SSupply and fixing of filter made iron frame with white powder coating and SS 304 mesh of size 10" x 10" x 17" suitable for 5 Hp pump to 15 Hp pump. Made of SS Brass Alluminium Material

S&F of IP 68 protected LED Under water light system in SS housing 9 x 1W, 12 / 24 V DC DMX support LED lamps with dynamic colour changing capability available in quick connecting cable coupled with various counting accessories. Ability to create 16.7 million uniform, smooth and brilliant colours with our revealing any lamp image, Available in 5 colour - amber, green, red, blue, white and RGB multi Colour changing.

Power supply for 9W LED lights

Colour changing controller LED lights

Electrical Panels for with VFD Starter, Main MCB, MCB for pumps & lights , indicating lights ,connection strips, Bus bar, Amp & Volt meter, CT, Panel Fan and accessarie. -Suitable for 2 nos 7.5 Hp pump

Please Enable Macros to View BoQ information