Loading
Loading…
Loading…
Tender Value
₹5.8 Cr
EMD Value
₹11.6 L
Closing Date
20 Aug 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER TEL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (As per Rly. Bd. letter No. 2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022).
As per Tender Document and GCC-2022 with latest amendment attached.
Financial Eligibility Criteria (Clause 10.2 of part-I GCC-2022): The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Important Instruction: "The balance sheet and all other financial documents attested/certified by the Chartered Accountants (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference" Vide letter no. CE/Works/ECR/HJP's letter No.ECR-HQ0ENGG (CONT)/ 0009/2025 dtd. 18.11.2025 (ii) Gazette Notification No.1-CA (7)/192/2019, dated 02.08.2019 of the Institute of Chartered Accountants of India, published in the Gazette of India).
43 conditions · 11 needing a document upload
As per Tender Document and GCC-2022 with latest amendment attached.
As per Tender Document and GCC-2022 with latest amendment attached.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1) Provision of Communication Media for working of Block, Axle Counter and other telecom circuits on wireless channel at Bukru Station (BUKR) 2) Shifting of MTRC subscribers working over Dhanbad division from NR (New Delhi) MSC to NFR MSC (Guwahati). 3) Provision of station VHF communication recording facility at different Stations over Dhanbad.
SG-664-10-Tele-2026-27
SG-664-10-Tele-2026-27
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹11.6 L
20 Aug 2026
29 Jul 2026
6 Aug 2026
55 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 5,81,53,617.09 | ||
| — | 1.00 | — | — | ||
| Supply of 48 Mbps or higher OFDM outdoor TDM Redundant Backup (4XE1) radio equipment with Ethernet plus 4XE1 future capable capacity in unlicensed frequency band of 5.8 GHZ for back up RF link (Automatic changeover to wireless in case of wireless failure and vice versa ) along with DC power supply arrangement and accessories per enclosed specification .The Unit consist of 01 no. outdoor unit (ODU) + 01 no. indoor unit (IDU) as per RDSO spec no. RDSO/SPN/TC/ 91/ 2012 Rev -1 or latest amendment wireless back -up system consisting of: (a) IDU E1 indoor unit for E1 back-up, 2 Ethernet interface, Supporting wide range DC input (20 to 60 VDC). (Make: RADWIN or similar) (b) ODU/F58 Outdoor unit for external antenna for 5.8 GHz band INDIA unlicensed. (Make : RADWIN) (c) 5.8 GHz external antenna with gain of 28 dbi or higher along with mounting arrangement. (d) STP cable as per requirement. (e) STP RJ-45 connectors. (f) Site survey. (g) Application software on CD-ROM contains installation & operational manual and link budget calculator.Note- Contractor will supply all the document in 2 hard copy and 1 CD along with each equipment. In case the distance of tower is more than 45 meter from the indoor units, necessary modem/ repeater/amplifier should be provided by vendor as per requirement. (Inspection:Consignee). | — | — | — | 3,57,870.96 | |
| — | 1.00 | — | — | ||
| Augmentation of above setup at Sl. No. 1 for the capacity enhancement of 48 Mbps Radio to 200 Mbps Radio with fully functional 4XE1 Auto Changeover System.(Make: RADWIN or similar) (Inspection: Consignee) | — | — | — | 1,84,803.67 | |
| — | 30.00 | — | — | ||
| Supply of Self support mast/Complete Triangular 11" or higher Lattice (Guyies) Mast assembly along with mast monting unit consists of: (a) Supply of Triangular 11" or higher Lattice (Guyies) Mast/ Self Supported Mast Assembly with sections of approx 03 mtr. each (b) MS pipes with IS certification of outer diameter of 1" or higher should be used. This also includes adjustment of sections of Mast, tightning / replacement of Nut-Bolt and guyies maintenance with adjuster screws etc. This is very essential for structural integrity of the Mast. We will also carry out periodical maintenance of Line - of - Sight between connected stations dependent on structural parameters of mast. This is based on Item No. 10 of the Work Schedule. (Repainting of Mast is not included) (Inspection: Consignee). | — | — | — | 62,167.5 | |
| — | 1.00 | — | — | ||
| Supply of basic earthing kit 1 set as per RDSO spec no.- RDSO/SPN /197 /2008 or latest consisting of a) Earth electrode of copper bonded high tensile low carbon steel rods 3.0 m long dia 17 mm , specially designed for electrical grounding-01 Nos. as per RDSO Spec no.- RDSO/SPN /197/2008 or latest. (b) RDSO approved earth enhancing compound in 10kg pack-3 no. (c) Copper bus bar of 25mm x 6mm x 300mm with 99.9% purity - 1 nos. and another of 25mm x 6mm x 150mm to terminate on earth electrode-01 No. (d) PVC insulated multistring 35 sq mm copper cable in double as per IS-694 -20mtrs. e) Copper bus bar of 25mm x 6mm x 200mm with 99.9% purity - 1 nos. f) PVC insulated multistring 16 sq mm copper cable in double as per IS-694 -20mtrs. g) PVC insulated multistring 10 sq mm copper cable in double as per IS-694 -20mtrs. Installation of maintenance free earth consisting of the following Digging the earth to required depth, filling the Earth enhancement compound, Provision of Exothermic Weld connection on Copper Tape of 25*6*150 mm welded to the earth electrode(Weld material and tool & fixture for the weld to be arranged by the Contractor.) provision of Exothermic weld connection, one to connect the 35 sq. mm copper cable to the copper tape welded to earth Electrode and another to the copper tape to be fixed inside the equipment relay/rack/appartus room/(Fixture of mounting the copper inside the relay room, weld materials and tools and fixture of the weld shall be arranged by the contractor. (Inspection: Consignee). | — | — | — | 24,349.05 | |
| — | 1.00 | — | — | ||
| Installation of single earth (maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cable to copper plate using material supplied . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor.(As per bonding connections drawing no. SDO/RDSO/E&B/002 and as per RDSO spec no.RDSO/SPN /197 ver.1.0 or latest) a. Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter. b. Insertion of 3.0 meter electrode and penetrating it at least .2 meter by pushing gently with sledge hammer where the natural soil is assumed. c. Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling. d. Carrying out exothermic weld connection on single earth electrode to a copper tape of 150X25X6mm. e. Carrying out exothermic weld connection on the copper tape of 150X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy. .f. The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders. g. Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor (procured against supply item) from earth pit to MEEB. h. Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs. i. 525x350x250mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and dare of the testing and average resistance value shall be written. | — | — | — | 8,520.62 | |
| — | 30.00 | — | — | ||
| Transportation, installation, testing and commissioning of Higher Lattice (Guyies) or Mast. The sections should be painted orange/red and white alternatively. | — | — | — | 1,46,601 | |
| — | 1.00 | — | — | ||
| Supply of L-2 Switch (CISCO2960+) complete with all accessories. (Inspection: Consignee). | — | — | — | 80,153.72 | |
| — | 1.00 | — | — | ||
| Supply of Hand held Service Terminal / portable service terminal compatible with NMS. (Inspection: Consignee). | — | — | — | 2,43,294.3 | |
| — | 2.00 | — | — | ||
| Supply, Installation, testing & commissioning of MAPLE 4C or equivalent 1U, 19 Inch rack mountable device consisting of four E1 ports and three slots and one populated with 2W/4W E&M supporting upto eight interfaces, Balance two slots empty, units shall support both 230V AC/48V DC power supply including 50 pin cable one No. for supporting both 2W/4W E & W, AC adopter one number. Make: Mro-tek, Real time, Cygnus, Cisco or equivalent. (Inspection: Consignee). | — | — | — | 2,05,700.7 | |
| — | 1.00 | — | — | ||
| Site survey, transportation, installation, testing and commissioning of 48Mbps OFDM outdoor TDM Redundant Backup (4xE1) Radio equipment with Ethernet plus 4xE1 future capable capacity in unlicensed frequency band of 5.8 GHz for backup RF link (Automatic changeover to wireless in case of wire line failure and vice-versa) and all accessories. | — | — | — | 34,949.59 | |
| — | 35.00 | — | — | ||
| Excavation of concrete foundation. All the material required are to be supplied by the contractor. This includes 1) Cement concrete foundation of size approx 3ftx3ftx3ft shall be prepared or Lattice (guyies) mast. The exact size shall be decided on soil conditions. 2) Cement concrete foundation of size approx 6ftx6ftx6ft shall be prepared for self supported mast. The exact size shall be decided on soil conditions. 3) The ratio of casting of cement concrete foundation shall be 1:3:6 all the work will be executed as per specification and advised by site engineer. | — | — | — | 1,88,164.55 | |
| — | 50.00 | — | — | ||
| Supply of casing capping. Size - 2 inch. Make - Finolex or similar. (Inspection: Consignee). | — | — | — | 5,750 | |
| — | 50.00 | — | — | ||
| Installation of casing capping. Size - 2 inch & placing of various existing / new wires / cables inside the channel. | — | — | — | 2,734 | |
| — | 1.00 | — | — | ||
| Shifting of MTRC subscribers working over Dhanbad division from NR (New Delhi) MSC to NFR MSC (Guwahati). | — | — | — | 19,82,400 | |
| — | 145.00 | — | — | ||
| Supply, Installation, Transportation & Testing of VHF based secured communication equipment consisting of microcontroller-based equipment with built invoice / Data / storage facilities 25 W VHF Radio with talking instrument, power supply (12V DC/15 Amp) sealed maintenance free battery bank 12V/120AH, Omni Regular directional stacked dipole antenna, 50 mtr length RG-217 cable, Including portable programming and data backup Terminal, as per RDSO specification no.RDSO/SPN/TC/73/2008 with latest amendments. (Inspection:RDSO). | — | — | — | 4,80,68,467.15 | |
| — | 3.00 | — | — | ||
| Supply, Installation, testing & Commissioning of Server Hardware (1+1 config) for centralized monitoring of VHF Voice communication between Station Master, Guard & Loco Pilot through VHF based Secured Station Communication Equipment (SSCE) , which will comprise of: Microsoft Server 2022 Standard Edition, Intel Xeon Bronze 3204 1.92G, 6C/6T, 9.6GT/s, 8.25M Cache, No Turbo, No HT (85W) 16 DIMMS 2 x 16GB RDIMM, Up to 8 3.5" Hot Plug Hard Drives, 19.5" Monitor Tower Configuration 1 x 2 TB SATA SSD PERC H750 Adapter, Full Height, 8GB Cache Single, Hot-plug PS,495W iDRAC9,Enterprise, Single Hot Plug Power Supply, 1.2mm thick steel 19" rack, 600mm Wx 32U Hx600mm D, Fully Powder coated. Doors/Panels detachable, Front and Back Door with locking arrangement, Casters 4 Nos. One sliding Key-Board shelf, 4 Nos. detachable tray, AC Power distribution arrangement with 5 numbers of 5 Amps Sockets, Earthing Distribution arrangement, Cable/Route Manager & Client Software. (one server software and hardware can connect upto 35 remote locations). (Inspection: RDSO) | — | — | — | 46,74,609.09 | |
| — | 300.00 | — | — | ||
| Supply of CAT 6 UTP Patch Cord-2Meters as defined in Specification. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. (Inspection: Consignee). | — | — | — | 33,612 | |
| — | 300.00 | — | — | ||
| Supply of Simplex Single Mode Optical Fiber Patch Cord 9/125 Jumper Cable 5 Meters 15 ft (SC/APC - SC/APC, LC-SC/SC-SC/LC-LC/FC-LC or as per site requirement) Make- Super Shopper India or equivalent. (Inspection: Consignee). | — | — | — | 40,362 | |
| — | 500.00 | — | — | ||
| Supply of CAT-6 cable for indoor use , 4-pair Unshielded twisted pair (UTP), FR PVC Jacket , High Density Polyethylene insulation, 23 AWG solid copper conductor for superior conductivity , Conductor diameter: 0.57mm (23 AWG). Make- Molex/D-Link or similar (Inspection: Consignee). | — | — | — | 12,835 | |
| — | 500.00 | — | — | ||
| Supply of RJ-45 Connector suitable for CAT-6 cable (Inspection: Consignee). | — | — | — | 2,705 | |
| — | 1000.00 | — | — | ||
| Supply of 6 Core Armoured Single Mode OFC cable as per latest TEC/BSNL Specification (Inspection: Consignee). | — | — | — | 19,750 | |
| — | 1000.00 | — | — | ||
| Supply of 25mm. dia PVC Conduit Pipe (MMS) ISI marked as per: IS 9537 part-3 with all required accessories (metal clamping, Bends etc shall be use) as per instructions of Consignee. (Inspection: Consignee). | — | — | — | 11,920 | |
| — | 1500.00 | — | — | ||
| Laying/Drawing of CAT-6/OFC cable through PVC casing caping/PVC Conduit Pipe. | — | — | — | 10,440 | |
| — | 3.00 | — | — | ||
| SITC of On-Line UPS 5 KVA with battery back up of minimum 4 hrs with battery trolley of reputed make like APC/Uni-line or other reputed make with similar or better specs. (Inspection: Consignee). | — | — | — | 4,24,363.83 | |
| — | 520.00 | — | — | ||
| Splicing of optical fiber core and routing in joint closure/FDMS as per instruction of Site Engineer. | — | — | — | 22,115.6 | |
| — | 14.00 | — | — | ||
| Supply of 4 Port Fast ethernet on SDH, 10/100 base-T Interface Module Suitable for STM-1/STM-4. (Module to be supplied and installed as per requirement of SSE/Tele/Store/ DHN). (Inspection: Consignee). | — | — | — | 7,70,813.4 | |
| — | 292.00 | — | — | ||
| Joint endosure for 6 cores OFC with Velcro Tape -01no,Splice protection Sleeves-08no, Cable Tie (4")-01 dozen , numbering Ferrules-0l set lsopropyl Alcohal-l00ml,Tissue paper-06pices, PVC Tape (5m length of 10mm width) 01roll. (Inspection: Consignee). | — | — | — | 5,34,164.36 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalRDSOSPNTC732008Ver1forVHF.pdf
ATTACHMENT
Technical Spec
ATTACHMENT
LettertoZRsandTAN.pdf
ATTACHMENT
RDSODecontrolledItems.pdf
ATTACHMENT
ProcurementofVHFradiosetbyIndianRailways.pdf Procurement of VHF radio set by RLY
ATTACHMENT
Exemption procurement VHF Sets
ATTACHMENT
RlyboardLTR1.pdf
ATTACHMENT
Tender Document
ATTACHMENT
TechnicalSpecification-VHFRecordingandothers-SIGNED.pdf
ATTACHMENT
ProcurementofVHFradiosetbyIndianRailways.pdf
ATTACHMENT
Exemption_procurmentVHFSets_PPP-MIIOrder2017.pdf
ATTACHMENT
TenderDocument-10-BUKR-MTRC-VHF-SIGNED.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .