GENERAL Budget 2025 26 20 Provision Happiness corridor Beautification and Development from Vellikkeel to Parassinikadavu in Anthoor municipality Kannur District Providing Decorative Lighting General Electrical Work

Amount

Providing Decorative Street Lights

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

OD164026/2025-2026:Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo-Mechanically Treated bars of grade Fe-500D or more.

OD191900/2025-2026:Supply installation testing commissioning of of Decorative pole 6.0M in height above the ground level made out of GI, tubular pole ?T?washed and primered (ASTM A123, with minimum average GI coating of 65?m.), having two sections, bottom section of minimum 1000mm (L) x 140mm dia and the top section with minimum of 5000mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 200x200x12 mm with 4 Nos. of J bolts (GI) of size 16 mm diameter x 600 mm length. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The decorative bracket of 750mm Double Overhang to provided for suspended mounting of luminaire's. The column & brackets to be painted in MRF antique copper & golden finish marine treatment. The pole shall be of composite? construction designed to ?wind load? corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The base pipe shall be sourced only from Tata Steel or JSW. A valid certificate of origin from the respective OEM must be enclosed along with the bid. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. CAT REF: KESSLEC 6M CLASSIC POLE HDGI PU PAINTED + 750MM HDGI CASCADE SCROLL ARM DOH /Techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing

OD191967/2025-2026:Supply installation testing commissioning of of Decorative pole f 4.0M in height above the ground level made out of GI, tubular pole ?T? washed and primered (ASTM A123, with minimum average GI coating of 65?m.), having two sections, bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 3000mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 200x200x12 mm with 4 Nos. of J bolts (GI) of size 16 mm diameter x 450 mm length. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The column & brackets to be painted in MRF antique copper & golden finish marine treatment. The pole shall be of composite? construction designed to ?wind load? corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The base pipe shall be sourced only from Tata Steel or JSW. A valid certificate of origin from the respective OEM must be enclosed along with the bid. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. CAT REF: KESSLEC 4M CLASSIC POLE HDGI PU PAINTED /Techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing

OD191759/2025-2026:Supply & Installation of Decorative LED street lantern with a system output of 50W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanised painted mounting bracket for a Pole top version. Overall system efficiency of 150lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, THD less than or equal to 10%, Chip make Cree/Osram/Lumilled/Bridgelux/Nichea with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The OEM is required to submit test certificates, including LM79, LM80, and IS10322, from a laboratory accredited by NABL. The body colour of luminaire should be in antique coppper & golden finish with a MRF marine treatment. CAT REF: KESSLEC BIRKDALE PT 50W NW T3 LED / Techno commercial or equivalent make of Keselec/Wipro/Crompton as per attached drawing

OD191745/2025-2026:Supply & Installation of Decorative LED street lantern with a system output of 75W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanised painted mounting bracket for a Suspended version. Overall system efficiency of 150lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ? 0.95, THD less than or equal to 10%, Chip make Cree/Osram/Lumilled/Bridgelux/Nichea with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The OEM is required to submit test certificates, including LM79, LM80, and IS10322, from a laboratory accredited by NABL. The body colour of luminaire should be in antique coppper & golden finish with a MRF marine treatment. CAT REF: KESSLEC BIRKDALE SUS 75W NW T2 LED/ Techno commercial or equivalent make of Keselec/Wipro/Crompton as per attached drawing

90.12.5.3:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm

OD185224/2025-2026:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing RCC/HUME/STONE WVRE/GI/DWC pipe as required.2 core 16 sq mm

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

9.1.3:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.16.2.4:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

OD163996/2025-2026:Supply, conveyance & installation of Hensel or equivalent make IP 66 / IP 67 weather proof 180x 130 x 77 mm cable junction Box ( KF 1006 B) with Terminal Set 2.5-6 sq.mm Copper

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD177724/2025-2026:Supply and fixing Digital Time switch 240V AC DIN/BASE mounting in the existing enclosure and giving connection as required- (L&T110-240 V Digital Time Switch 67DDTO)

OD164012/2025-2026:Supply and fixing 25A AC3, MNX 25, 2 Pole power contactor conforming to IS/IEC 60947-4-1 & IEC60947-4-1 in the existing enclosure and giving connection as required

OD164002/2025-2026:Supply &fixing DIN Rail in the existing board

OD164001/2025-2026:Supplying and fixing 32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board as required.

OD164006/2025-2026:Supply and fixing 32A, HRC Fuse Base with HRC Fuse link with connections, in existing meter board as required.

OD164009/2025-2026:Supply and fixing 32 mm dia 6Kgff/cm2 PVC pipe including fixing the pipe with clamp/clips at 60cm spacing. etc as required (For Service Pipe)

90.6.4.1:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 1 Run

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD164018/2025-2026:Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required. 2 x 25 x 3 mm GI strip

OD163997/2025-2026:Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required. 25 mm X 5 mm G.I. strip

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.10:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD164004/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt etc. as required.

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

OD164000/2025-2026:Supply and fixing of Danger 415 V, 150 x 100 mm aluminium anodised legend plates as required.

OD185243/2025-2026:Supply Conveyance, installation, testing and commissioning of 4800 Lumen LED Flood light output greater than 120 lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD164007/2025-2026:Supply ,conveyance ,installation testing and commissioning of 1200 mm 1x20 W LED tube light fitting housing made of extruded thermal polycarbonate with 6500K , color temperature with duly wired up for use on 230V AC . The light fittings shall be fixed directly on wall or ceiling with and giving connection with required length of 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

OD177726/2025-2026:Supply, installation testing and commissioning of bollard light of 650 mm height, 9w WW Led IP65 rated, with powder coated G. I. pedestal on existing concrete foundation with foundation bolts etc. as required.(Bajaj - BOLLARD LIGHT Tulip BGBOM 650 9W LED/equivalent)

OD164008/2025-2026:Hire and labour charges for concrete cutting as required.

Biju E.M (BID ID -2416817)

prathibha engineering (BID ID -2419014)

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY (BID ID -2416948)

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Biju E.M

prathibha engineering

PRADEEP KUMAR.V.K