REPAIRS TO ROOF, WALL RIDGES AND ROOF PAINTING AND SIMILAR ITEMS UNDER AGE BR I OF GE (S) BINNAGURI

Amount

M&L for preparation and cleaning of old painted surface of CGI/PGI sheet of any discription, in roof/wall over 10cm in width or girth by wire brushing or any mechanical means and applying one coat of anti-corrosive paint, white or tinted complete all as specified and directed.

M&L for preparation and cleaning of old painted surface of CGI/PGI sheet of any discription, in roof/wall over 10cm in width or girth by wire brushing or any mechanical means and applying two coat of anti corrosive paint, white or tinted complete all as specified and directed.

M&L for preparation and cleaning of old painted surface of CGI/PGI sheet of any discription, in roof/wall over 10cm in width or girth by wire brushing or any mechanical means and applying a coat of Red Oxide zinc crome primer complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, of any thickness as in roof coverings including nainital or similar pattern complete all as specified and directed.

Dismantling of wrought Iron or mild steel work of any description and in any position complete all as specified and directed.

M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed. ( Make: TATA blue scope or equivalent of CRIL/METCO.)

All as per item No- 06 here in above but Plain sheet as in ridges/ hips / valley/Eaves and Eaves board - ditto --

M&L for mild steel work in tubular trusses and tubular posts including special shaped washer duly welded, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 with one shop coat of Zinc Chrome primer complete all as specified and as directed.

M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints as in rain pipe complete all as specified and directed.

S&F of 110mm bore PVC (SWR) bend any radius jointed with solvent complete all as specified and directed.

SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items,any lower rate qouted by the Tenderer will not be cosidered and total amount under col No 53 will be adjusted accordingly cosidering rate inserted by the MES.

Scrap Iron of any description.

Old unservicable sheet of any description

Old unserviceable PVC pipe and fitting

M/s. RAMPHAL GARG

S K GUHA

M/S S.K. CONSTRUCTION

samrat saw mill and joinery workshop

GUHA ENTERPRISES

R K AGARWAL

S. G. CONSTRUCTION

Shri Satpal Singh