Loading
Loading…
Loading…
Tender Value
₹74.1 L
EMD Value
₹1.5 L
Closing Date
21 Jul 2026, 11:00 pm
Karnataka Power Transmission Corporation Limited
Replacement of existing 11KV Bank-2 PCVCB Switchgears (1 I/C, 8F, 1CB) by MEI make MCVCBs (1 I/C, 8F, 1CB, 1BC) at 66/11KV Substation Hullahalli, Nanjanagudu Taluk, Mysuru District on Partial Turnkey (PTK) basis.- Others-Call1
KPTCL/2026-27/SS/WORK_INDENT3823
KPTCL/2026-27/SS/WORK_INDENT3823
Open
Sub-Station
KPTCL CEE Transmission Zone Office Mysuru
19 documents required · 19 mandatory
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
The bidder should have satisfactorily Constructed, completed & Commissioned atleast One (1) No. of 66kV or above voltage class Sub-station/Terminal Bay on Total or Partial Trunkey basis in the last ten (10) years preceding the date of bid submission and shall be in satisfactory service for a minimum period of One (1) year prior to the date of submission of the Bid. OR The bidder should have satisfactorily constructed, completed and commissioned not less than Five (5) Nos. of 33kV or above voltage class Sub-Stations/Terminal Bays on Total or Partial Turn Key basis in the last ten(10) years preceding the date of Bid Submission and shall be in satisfactory service for a minimum period of One (1) year prior to the date of submission of the Bid. OR The Bidder should have carried out erection of atleast One(01) No. of 66kV voltage class or above voltage class Sub-Station Additional Transformer work OR atleast One(01) No. of 66kV voltage class or above voltage class Sub-Station Transformer Replacement/ Augmentation/Capacitor bank installation work on Total or Partial Turnkey Basis in the last 10 years preceding the date of bid submission and shall be in satisfactory service for a minimum period of One(1) year prior to the date of submission of the Bid. ORThe Bidder should have carried out erection of atleast Two (02) Nos of Agumentation/Replacement/Capacitor bank installation of 66kV or above voltage class Transformer works on Labour Contract Basis in the last 10 years preceding the date of bid submission and shall be in satisfactory service for a minimum period of One (01) year prior to the date of submission of the Bid OR Bidder who has executed Additional Transformer works or Replacement of Transformer works of private firms under the direct supervision of ESCOM/KPTCL officers are eligible to participate. Such Bidder should have carried out erection of not less than Two (02) Nos. of 66kV or above voltage class Additional Transformer Work on Total or Partial Turnkey Basis in the last 10 years preceding the date of bid submission and shall be completed and commissioned prior to the date of submission of the Bid.
The Bidder shall be registered firm as Sole Proprietorship/Partnership/Pvt Ltd Company etc
For other than proprietorship, the Bidder shall furnish the registered partnership deed and Power of Attorney
Minimum Average Annual Turnover (MAAT) of the bidder for best two(02) year out of preceding five financial years, shall not be less than Amount Put to Tender as per 3.2(a) of std tender documents(ITT).
Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx2.5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2025-26) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2025-2026 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, No Deviation CERTIFICATE as revised in Annexure , Any other undertaking / agreement (if applicable) are to be uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date as per 3.10(xviii) of ITT
Bidder shall ensure that soft copies of i. Letter of undertaking for Non performance ii. Letter of undertaking for Risk and Cost iii. Letter of undertaking for Litigation iv. Letter of undertaking to source the supply of equipment material from KPTCL approved Vendors only (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date as per 3.10(xviii) of ITT
i. Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
ESI certificate
EPF Certificate
Shall upload valid GST Certificate and PAN copy
Liquid Assets and/or availability of credit facilities of not less than 30% of the Amount put to tender(Credit lines/ Letter of credit/ certificates from Banks for meeting the fund requirement etc.) (30% of APT)
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
₹1,860
₹1.5 L
7 Jul 2026
7 Jul 2026
23 Jul 2026
20 Jul 2026
17 Jul 2026
Replacement of existing 11KV Bank-2 PCVCB Switchgears (1 I/C, 8F, 1CB) by MEI make MCVCBs (1 I/C, 8F, 1CB, 1BC) at 66/11KV Substation Hullahalli, Nanjanagudu Taluk, Mysuru District on Partial Turnkey (PTK) basis.- Others-Call1
1C x 1000 Sqmm 11KV XLPE UG cable
3C x 400 Sqmm 11KV XLPE UG cable
3C x 240 Sqmm 11KV XLPE UG cable11KV XLPE cable
1C x 1000 Sqmm Cable Terminationkit - Indoor
1C x 1000 Sqmm Cable Terminationkit - Outdoor
3 Core x 400 Sqmm Cable Terminationkit - Indoor
3 Core x 400 Sqmm Cable Terminationkit - Outdoor
3 Core x 240 Sqmm Cable Terminationkit - Indoor
3 Core x 240 Sqmm Cable Terminationkit - Outdoor
19 Core x 2.5 Sqmm Copper Control Cable
4 Core x 6 Sqmm Copper Control Cable
4 Core x 2.5 Sqmm Copper Control Cable
11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR outgoing feeders.
11 kV isolator, double break 400 A, 25 KA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for capacitor bank
Supplying & Erection of D.P.Structure with all accessories using 9.5Mts. RCC poles,145Kg WL suitable for mounting Roaster GOS.
Cable termination structure for transformer (0.069+0.003=0.072)
11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank (0.158 t per structure) 0.141+0.0178=0.158
Coyote ACSR conductor
Aluminium Lugs 240 Sqmm (Connect feeder cables to GOS)
Aluminium Lugs 150 Sqmm (Connect feeders to LAs)
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using cast iron welding elec...
Multi functional Transducer (MFT)
Terminal blocks (knife type)
Terminal blocks (link type)
Wiring including PVC insulated FRLS - Current
1.1kV wires IS694:2010 - 2.5 sqmm Red-90 mtrs Yellow-90 Mtrs Blue-90 Mtrs
Wiring including PVC insulated FRLS - Voltage 1.1kV wires IS 694:2010 - 1.5 sqmm Red - 35 mtrs, Yellow-35 Mtrs, Blue-35 Mtrs
Signal cables- Armoured Copper core with 0.5 Sqmm cross section multistrand 10 core for Digital Inputs
Control cables- Copper core with 1.5 Sqmm cross section multistrand 10 core for Digital outputs
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (Size: 32mm dia)
Replacement of existing 11KV Bank-2 PCVCB Switchgears (1 I/C, 8F, 1CB) by MEI make MCVCBs (1 I/C, 8F, 1CB, 1BC) at 66/11KV Substation Hullahalli, Nanjanagudu Taluk, Mysuru District on Partial Turnkey (PTK) basis.- Others-Call1
Eerection of 11KV Switchgear 25 kA, MCVCB, 1600A for Incomer and 1250 A for feeders
Testing & commissioning of switch gears
Laying of 1C x 1000Sqmm 11KV XLPE UG cable
Laying of 3C x 400Sqmm 11KV XLPE UG cable (Buscoupler Switchgear to PCVCB Bus coupler GOS)
Laying of 3C x 240Sqmm 11KV XLPE UG cable
11KV Switchgear to DP Structure (including CapBank, 8 Feeders & BC feeder)
Pot-head work of 1C x 1000sqmm Cable Termination kit - Indoor
Pot-head work of 1C x 1000sqmm Cable Termination kit - Outdoor
Pot-head work of 3C x 400sqmm Cable Termination kit - Indoor
Pot-head work of 3C x 400sqmm Cable Termination kit - Outdoor
Pot-head work of 3C x 240sqmm Cable Termination kit - Indoor
Pot-head work of 3C x 240sqmm Cable Termination kit - Outdoor
laying of 19 Core x 2.5 Sqmm Copper control cable
laying of 4 Core x 6 Sqmm Copper control cable
laying of 4 Core x 2.5 Sqmm Copper control cable
Erection of 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR outgoing feeders.
Erecdtion of 11 kV isolator, double break 400 A, 25 KA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for capacitor bank.
Supplying & Erection of D.P.Structure with all accessories using 9.5Mts. RCC poles,145Kg WL suitable for mounting Roaster GOS.
Cable termination structure for transformer (0.069+0.003=0.072)
11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank (0.141+0.0178=0.158)
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using cast iron welding elec...
Supplying and Grounding of Equipment with G.I.Flat 50x6mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of ho...
Supplying and fixing of 450mm diax 450mm height 1.5" to 2" hume pipe collars for earth pits.
Fixing of Multi functional Transducer (MFT)
Fixing Opto coupler
Wiring including PVC insulated FRLS - Current
1.1kV wires IS694:2010 - 2.5 sqmm Red-90 mtrs Yellow-90 Mtrs Blue-90 Mtrs
Wiring including PVC insulated FRLS - Voltage
1.1kV wires IS694:2010 - 1.5 sqmm Red - 35 mtrs, Yellow-35 Mtrs, Blue-35 Mtrs
Laying of Signal cables- Armoured Copper core with 0.5 Sqmm cross section multistrand 10 core for Digital Inputs
Laying of Control cables- Copper core with 1.5 Sqmm cross section multistrand 10 core for Digital outputs
Coniguration of RTU and Engineering along with validation of data at SLDC
Releasing of 11kV PCVCB switchgear panels with 1I/C+8F+1CB.
i)Releasing of Existing 11kV double break Bank GOS 800A (1 I/C)
ii)Releasing of Existing 11kV double break Bus GOS 400A (8F+1CB)
iii)Releasing of Existing 11kV Single Break GOS Set 400A (7F)
Releasing of 11kV DP Structures for 11kV feeders
Releasing of 11kV ODS BUS Poles.11kV PCVCB ODS BUS poles
Releasing of Existing PI structure (0.231*6 = 1.386 MT)
Releasing of existing 11kV Buses.
i)Drake Conductor bay-Main Bus-(Scrap pieces Aprox-50 Mtrs)
ii)Coyote Conductor bay-Cross Bus-(Scrap pieces Apox-30 Mtrs)
Released control cables cutted pices scrap( diffrent sizes 19 core, 4 core, 2core etc) (as per actual)
Releasing of 11kV 3cX240Sqmm UG Cable
Beams out of Galvanised iron channels with arrangements for stringing power conductor & mounting DB GOS at 11 KV side
a) Released scrap angles iron, gos mounting structures, gos contacts, earth elect...
Dismantling of concreate
1) 11 kv Breaker foundation(2*2*1*10 =40)
Loading of 11 kV Switchgears other cable and materials
(Loading at Hullahalli S/s)
Unloading of 11 kV Switchgears other cable and materials
(Unloading at KPTCL store, Hootagally)
Transportation of released Breakers etc from 66/11kV Hullahalli S/s to Divisional Major works store, Hootagalli Mysore.
Station to weigh bridge and store vice versa
Replacement of existing 11KV Bank-2 PCVCB Switchgears (1 I/C, 8F, 1CB) by MEI make MCVCBs (1 I/C, 8F, 1CB, 1BC) at 66/11KV Substation Hullahalli, Nanjanagudu Taluk, Mysuru District on Partial Turnkey (PTK) basis.- Others-Call1
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming
to IS- 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fi...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Steel Fabrication- Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Pre cast RCC Cover Slabs
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1-6 (1 cement - 6 coarse sand)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing ruled pointing to coursed stone masonry with lime mortar 1-3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery,...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing 20 mm cement plaster of mix -1-4 (1 cement- 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage
of mixed Material to work site, spreading in uniform layers with motor grader on ...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on
prepared surface mixing by mix in place method with front end loader at OMC and co...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Work on Hand details format.doc
Commercial Information / Worksheet • 0.06 MB
Insurance documents.docx
Commercial Information / Worksheet • 0.02 MB
credit facility certificate FORMAT new format.doc
Commercial Information / Worksheet • 0.06 MB
Td MYS HULLAHALLI kw3 Other.pdf
Tender Document • 2.22 MB
FORMATS TO BE SUBMITED.docx
Techno-Commercial Worksheet • 0.07 MB
NIT MYS hULLAHALLI kw3 Other.pdf
Instructions to Tenderers • 0.66 MB
Download all tender documents and submit your bid