BID DOCUMENT FOR (1) PROPOSED VERTICAL TURBINE PUMPING MACHINERY 6300 LPM 65.00 MT. HEAD 150 HP AT EXISTING INTAKE WELL AT KANEVAL LAKE TO EXISTING WATER TREATMENT PLANT AT HEAD WATER WORKS. (2) REPLACEMENT OF 500MM DIA M.S. PIPE WITH NECESSARY VALVES, FLOW METER, REMOVING AND FIXING OF EXISTING CONTROL PANELS FOR MACHINERYS AT KANEVAL LAKE UNDER 15TH FINANCE COMMISSION (YEAR 2020-2021- 2021-22 2022-23) UNTIED, TIED GRANT.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

Signature of Contractor President Chief Officer

Khambhat Nagarpalika Khambhat Nagarpalika

Khambhat Khambhat

SBD SECTION-7 BILL OF QUANTITIES-285

KHAMBHAT MUNICIPALITY, KHAMBHAT

PROPOSED VERTICAL TURBINE PUMPING MACHINERY AT EXISTING INTAKE WELL AT KANEVAL LAKE TO EXISTING WATER TREATMENT PLANT AT HEAD WATER WORKS

AT KHAMBHAT. 6300 LPM 65.00 MT. HEAD 150 HP.

Item Rate (Rs.)

No. Description of Items Qty. Unit Amount (Rs.)

1 Supply, installation, testing & commissioning of Vertical Turbine pump motor set of specified duty parameters & guaranteed efficiency of

following MOC with specified capacity vertical solid shaft TEFC squirrel cage induction motor (with minimum IE-3 efficiency class), working

on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1000 RPM along with column and bowl assembly, discharge head,

base channel / RSJ etc. complete as per relevant IS. M.O.C.: Impeller & Sealing Rings: CF8M, Bowl & Suction Bell: Cast Steel WCB , 112.0 KW 14878.00

Shaft with coupling: SS 410, Column Pipe: MS ERW, Mechanical seal (above 30 kw), Base Plate: MS, Line Bearing: Thordon, Suction

Strainer: S.S. At Existing Intake Well - Discharging 6300 LPM against 65.0m duty head, 150 HP & 112 KW (1 Set) Working.

1.1 Erection Charges 36.0 KW to 132 KW. 1 Job 78750.00

2 SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum degree of protection - IP 52 as per IS: 2147, operation

on 3-Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with instrumentation compartments accomodating LED type indicating

lamps, control contactors as per IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air insulated electrolitic

grade Aluminum bus bar for three phase & neutral system with incomming breaker- microprocessor based Air Circuit Breakers (electrically

operated drawout type)/ air break fixed type MCCB with trip free mechanism, current limiting type as per IS: 8828, Motor Contractor (as per

type -2 coordination), Overload Relay with built-in single phasing prevention feature & auxiliary feeders as per SLD drawings, momentary

contact type push buttons, equipment fittings, bus bars, cable boxes, cable gland, incoming & ougoing cable connection for 1100V grade,

Aluminium/ Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable, 10% spare terminals, power wiring using 1100V 1 No 181894.00

grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable compartments / alleys of minimum 300 mm size, GI / Al

earth bus bar for entire length. MCC shall be fabricated from cold rolled, coled annealed (CRCA) sheet steel & minimum thickness of

various members shall be as follows : Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal

Partitions: 1.6 mm. Microprocessor based Soft Starter with built-in by pass contactor, Semiconductor Fuses, Harmonic Filters, cast resin

type CT, Digital MFM, Analogue Ammeter & minimum 10 Channel Temperature Scanner with RS 485 communication port. For 125 KW

3 Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating

mechanism suitable to operate on 415V A.C. With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of following capacities

with following spare parts for panel mounting Switch Disconnector Fuse Units. Operational Handle Assembly Complete for 250 Amps. Cat

4 Supply, installation, testing & commissioning single girder type fully electrically operated EOT crane with electrically operated hoist, class II

duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross girder, all three

motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device, cables form 1 No 416250.00

motor to starter panel & other required accessories & tested as per IS Specifications. Capacity 2 tonne, 0 - 6 Mt. Span, 12 Mt. Long Travel

& 6 to 10 mt. Lift.

5 Supply, laying, testing & commissioning of 1.1 kV grade, XLPE insulated, stranded Copper conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable

trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 (Part-1) & IEC: 60502 50 Mtr. 622.00

(Part-1) of following sizes:: from GEB to HRC Fuse to LT MCC Panel Size 1 x 4 x 185 sq. mm. 1 Working Pump

SBD SECTION-7 BILL OF QUANTITIES-286

6 Supply, laying, testing & commissioning of 1.1 kV grade, XLPE insulated, stranded Copper conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary clamps / in existing cable

trench / cable trays / conduit / pipe sleeves at road crossing or floor as per site requirement) conforming to IS: 7098 (Part-1) & IEC:

(Part-1) of following sizes: from MCC Panel to Individual Motor Size 1 x 4 x 120 sq. mm.

7 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy

duty cover (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and

signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling 2 No 7025.00

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (b) For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs.

Back filling Compound :1 no. Bag of 25 Kg.

8 Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person

suffering from Electric shock with minimum 50" diagonally size.

9 Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated

ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (savlon or similar) etc. (All above contents 1 Each 297.00

shall be of standard makes)

10 Supplying 12mm rubber matting of following thickness as per IS:15652/IEC 61111. 6 Sq.mtr 3051.00

11 Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid for

separately)(i) Block (Letters/Figures). Name -Prog.-Year, Head works Pumping Machinery Details.

12 Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T., OCB/ ACB/ Transformer LT panel board, Motors

etc. using proper clamp.

Say, Amount Rs.

SBD SECTION-7 BILL OF QUANTITIES-287

KHAMBHAT MUNICIPALITY, KHAMBHAT

ESTIMATE FOR REPLACEMENT OF 500MM DIA M.S. PIPE WITH NECESSARY VALVES, FLOW METER &

REMOVING & FIXING OF EXISTING CONTROL PANELS FOR MACHINERYS AT KANEVAL LAKE FOR

KHAMBHAT WATER SUPPLY..

DESCRIPTION QTY Total Rate PER AMOUNT Rs.

Providing and supplying D. I. K-9 D/F grade pipes for

following nominal bore diameter with internal cement mortar

lining including all taxes, insurance, transportation, freight

1.0 charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete.

Manufacture, Supply & Delivery of Ductile Iron Flange

socket spigot bends, tees, reducers or any other specials as

per BS-EN-545/1995 Class-A series K12 suitable for use

with D.I. Pipes manufactured as per IS: 8329/1994 delivery

of specials is to be made to GWSSB store or site of works

any where in Gujarat including all taxes, loading, unloading,

carting, stacking, insurance, inspection charges, octroi etc.

complete. With external bitumen & zinc coating & internal

cement mortar lining. Flanged ended. 350mm dia. & Above

Providing and supplying ISI mark CI D/F Sluice Valves as

per IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

3.0 conveyance to departmental stores, stacking etc. complete.

B. Sluice Valve ISI Mark only. A3) PN-1.6 With hand/wheel

cap operated (Alt-1 type long body). 250mm Dia.

Providing and supplying ISI mark CI D/F Reflux Valves as

per IS:5312 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight

4.0 charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark. 250mm Dia.

SBD SECTION-7 BILL OF QUANTITIES-288

DESCRIPTION QTY Total Rate PER AMOUNT Rs.

Providing and supplying C. I. Temper proof Air valves with

SS 304 Float gun metal- nozzle of approved make & quality

of following class and diameter including all taxes,

5.0 insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. With Isolating Sluice Valve

Lowering, laying and jointing in position following D.I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, including nut

bolts and giving satisfactory hydraulic testing, etc. complete.

250mm Dia Sluice & Reflux Valve.

6.1 300mm Dia Sluice & Reflux Valve. 2.00 1312.15 Nos 2 624

6.2 100mm Dia Air valve 1.00 604.90 Nos 604

Manufacture, supply and delivery of cast iron Detachable

joints (Short & long) complete with joint flanges duly drilled,

synthetic rubber sealing rings manufactured from styrene

butadine rubber (SBR) and other required accessories such

as nut, bolts etc. conforming to IS specification 8794-1988

7.0 or its latest revision if any suitable for use with A.C.

Pressure pipes. Delivery of joints including its accessories

including loading, unloading, carting, stacking, insurance, all

taxes, octroi etc. complete. Short Collar with ISI Mark. Class

7.1 Short Collar with ISI Mark. Class 15 - 300mm PN 1.6 1.00 982.00 Nos.

7.2 Short Collar with ISI Mark. Class 15 - 500mm PN 1.6 2.00 3396.00 Nos.

7.3 Long Collar with ISI Mark. Class 15 - 500mm PN 1.6 2.00 5098.00 Nos.

Providing and making flanged joints to flanged DI / C.I.

pipes of all classes / specials etc. including cost of all

8.0 jointing materials rubber packing, nut bolts, inclduing

lowering laying jointing labour hydraulic testing etc.

complete. 500mm Dia 5.00 2976.20 No. 14 881

Design, supply, installation, Testing, commissioning of Full

Bore Electromagnetic flow meter factory calibrated

Regular Power Operated, Flanged connection, Flow

9.0 sensor, Indicator, Transmitter and totalizer with all

accessories viz. surge arrestor, associated cable, cabinets,

hardwares, etc complete as per following specification -

PN10 - Size - 500 mm Nominal bore

SBD SECTION-7 BILL OF QUANTITIES-289

DESCRIPTION QTY Total Rate PER AMOUNT Rs.

i) Flow meter/sensor : DC pulsed type, IP 68 Protection,

Flanged process connection as per IS 1538 or equivalent

standard. SS304/ Metalic Alloy Flow Tube, SS 316/SS

L/ Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/

inbuilt Grounding Electode, Neoprene/ Polyurethane/ Hand

Rubber/ Rilsan lining. SS 304/Die Cast Aluminium /Carbon

steel with Anticorrosive Paint Coil Housing with Junction

box, CS flanges.

ii) Flow transmitter / converter (remote Field Mounted) :

Microproccessor based, Modular desing, 2 Line LCD for

indication of actual flow rate, forward, reverse, sum totalizer

display +- 0.5% accuracy at 0.3 to 4 m/sec velocity. 4 to

mA with HART/Modbus uotput, one scalable pulse, one

status output IP 67 Protection. Die cast aluminium/

polycarbonate/ SS316 with Anticorrosive Paint/ PU finish

with glass window enclosure. inbuilt EEPROM and Data

Logger, 20 meter cable length for sensor to transmitter

communication etc. along with wall mounted/stand

moundted cabinet. 1.00 263124.00 Nos. 2 63 124

Design, Supply, Installation, Testing, Commissioning of

Bourdon Type Pressure Gauge, ±1% accuracy, Direct

bottom 1/2" NPT (M) process connection, IP 67, Glycerine

filled, SS304 Case with Bayonet Type Bezel, SS316 L

10.0 Bourdon Tube, SS 316 Movement material, Aluminium dial

with black graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out disc, shatter

proof glass, SS tag plate etc as per IS 3624. 150 mm Dial

Labour charges for Jointing/ repairing leakage in CI/DI

pipeline of following diameter at different places including

necessary excavation manually or by machinery, removing

of mud, dewatering, cleaning of pipe, cutting of pipe,

11.0 Jointing & repairing using CID joints including CID joints,

rubber rings, nut bolts, hiring excavator, Hydra/ Crane,

dewatering machine, fuel, operator etc complete (including

cost of jointing material but excluding cost of pipe). For

Removing of Existing 150 HP Panels & Distribution Panel

12.0 Including all wires, Earthing, Necessary Components etc. at

Existing Intake Well. 3.00 3712.00 No. 11 136

Fixing & Installation of Existing 150 HP Panels & Distribution

Panel Including Connecting all wires, Earthing, Necessary

Components etc. at Existing Intake Well.

SBD SECTION-7 BILL OF QUANTITIES-290

DESCRIPTION QTY Total Rate PER AMOUNT Rs.

Providing and casting in situ C.C. in grade M-20

(proportions as per mix design or as per table 9 of IS456

2000 in masses by weigh batching) using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC work, including

scaffolding centering, formwork, needle vibrated

consolidation, curing complete up to 6 meter depth or height

(excluding cost of reinforcement and neat finishing) with

centering and shuttering/deshuttering etc. complete for

structure other than water retaining (Below G.L). With

Formwork. For Thrust Block. 7.00 6348.00 Cmt.

Supplying cutting, bending, binding and placing in position

steel as per plan and design and as per ISS 2502 including

cost of steel and binding wire for reservoirs/structures only

15.00 including lift up to 6 meter height or depth below G.L. for all

diameters. Do – deformed (TMT) bars confirming to relevant

IS Fe – 500 grade for all diameters.

SBD SECTION-7 BILL OF QUANTITIES-291