PROVN OF CGKG SCHOOL AT CGDHQ15 OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/HARDSTANDING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (COMPOUND WALL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XI (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

EXTERNAL WATER SUPPLY:- M & L for Valve chamber of internal size 900 mm X 900mm X 1000mm depth (internal dimensions) including excavation in any type of strata, 150mm thick PCC in 1:4:8 type D2 foundation, PCC soild block masonry work in CM 1:6, 10 mm thick rendering in CM 1:6 internal and 12 mm thick external plaster in CM 1:4 extended upto 150mm depth below GL, PCC 1:3:6 type C-1 as in coping, 3mm thick MS sheet cover fixed to angle iron frame of suitable size with two Nos of hinges and one No. handle made out of MS round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as specified. Note:- The quoted cost shall be inclusive of all earthwork and connected items.

Supply and fix Cast Iron Air Valves with two air outlets,50mm dia bore and fixing up in cast iron water supply mains of size 80mm dia

Drilling/Cutting and taping CI pipe for branch connections of 80mm bore in existing 150mm dia CI/DI Pipe complete all as specified and directed by Engineer-in-charge Note:- Fittings will be measured and paid separately.

EXTERNAL ELECTRIC SUPPLY:- M&L for LT panel board cubical type compact 415 Volts AC 50 Hz,fabricated of Thermoplastic (Polycarbonate),Insulated,shock proof,dust proof,water proof,anticorrosive and conforming to IP 55 complete including copper bus bar 125 Amps 4 strip mounted on porcelain insulated & enclosed in chamber & connection from incoming and outgoing with openable shutter both sides comprising of following:-

Copper busbar RYB and N of 125 Amp capacity one set

MCCB 4 pole, 63 Amps, breaking capacity 25 KA- 01 No.(Incoming)

Digital Multi function meter - 01 No.

MCCB 4 pole, 415 Volts, 12/63 Amps, breaking capacity 25 KA- 02 Nos.(Outgoing)

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall conforming to IS 14930(Part I and II) for protection of underground cables with all fittings, laid in trenches/road/nallah or fixed along wall, poles or laid under floor etc for cable protection all as specified. (excavation and earthwork shall be measured and paid separately). Make:- Rex/Poly/Gemini

(a) 63mm outer dia

(b) 90mm outer dia

M & L for Earthing complete with Galvanized steel earth plate electrode of size 600mm X 600mm, 6mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C-1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed. Note : The unit rate shall also inclusive of excavation in any strata, PCC (1:3:6) type C-1 for earth pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc, complete all as specified and directed.

Supply and fixing octagonal hot-dip galvanized street light poles including junction box, height 7 mtrs, top dia 70mm, bottom dia 130 mm, sheet thickness 3mm, base plate 220x220x12mm, foundation nut bolts as per manufacturer recommendation including reinforced cement concrete foundation and hot dip galvanized bracket single arm for fixing of street light and one No of MCB 6 amp including 25 amp 4 way terminal block all as specified and directed. MAKE:BAJAJ/SURYA/PHILIPS/UTKARSH

Supply and fixing LED lights, Nominal watt 35 Watt, Nominal lumen efficiency 120 lumen/watt, high pressure die cast aluminium housing, 140-270V, 50 Hz, LED street light luminaries to be mounted on octagonal hot-dip galvanised street light poles complete all as specified and as directed by the Engineer-in-Charge. Make:-Philips(BRP052 LED 036 CW HP SLA FG S1 PSU GR)/Wipro(Skyline+LR13-501-xxx-57-xx)/Bajaj (BRTFG 36W)

Supply and fixing and testing Street Light automatic Nature Switch for three phase load of 5KW using infrared sensor based Timer switch including the sensor should have part night operation facility of minimum 04 hrs to maximum 12 hrs, the sensor along with 03 Nos contactor each of 20-25 A incoming MCB and outgoing MCBs of 20-25 A(03 Nos) and auto manual(senser by Pass), size of circuit should be multistranded FRLS min size of 10 Sqmm Wall Mounted/Pole mountable enclosure made of rust proof, electric shock proof, (sintex make SMC Junction Box) conforming to IP 54 and Model Swadeep 02 EC 5 KW 3P, all as specified and directed. Make:- Nature switch, Kakatiya Energy system/Bajaj/Healer Contactor:BCH/L&T/Schneider MCB:Schneider/ABB/Legrand wire for circuit wiring:Polycab/Finolex/Havells(FRLS)

INTERNAL WATER SUPPLY:- S&F 15mm dia fancy type Chromium Plated Angular stop cock with flange, caste copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- Jaquar Model No CQT-23059 or equivalent

Supply and fix Two way bib tap/angle cock 15mm Make:- Jaquar Model No CQT-23041 or equivalent

Supply and fix Health faucet with flexible pipe(ABS body) with 01 meter long PVC tube and wall hook Make:- Jaquar Model No ALD-chr-573 or equivalent

S&F Bib cock 15mm dia fancy type Chromium Plated Angular with flange, caste copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- Jaquar Model No CQT-23037 or equivalent

Internal Electrification : S & F modular type bell ding dong of 2 module size, conforming to IS: 8884-1978 complete all as specified and directed. Make:- Legrand Arteor Cat – Part No. 5734 43 or equivalent model of ABB (snieo)/ L&T (Entice)/ Wipro

S & F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed. Make:- Legrand Arteor Cat – Part No. 5734 26 or equivalent model of ABB 211/ Anchor Panasonic (roma)

S & F 20 W surface/ wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/ W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/ Sec-13): 2012, polycarbonate diffuser , housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220-240V, input frequency 50-60Hz , PF> 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make:- BAJAJ Cat–Part No. BCLAB 20W or equivalent model of Havells, Philips or Wipro

S & F 10 W surface/ wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/ W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/ Sec-13): 2012, polycarbonate diffuser , housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220-240V, input frequency 50-60Hz , PF> 0.95, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: BAJAJ Cat–Part No. BCLAB 20W or equivalent model of Havells, Philips or Wipro

S & F 20 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficiency >=100 lumen/W, integral SMPS based constant current electronic LED driver with THD<20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management,sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket 1.5m long with including necessary electrical connection to the fixture with 3 core flexible Copper conductor cable of appropriate size and light grade GI pipe dia 20mm, including GI clamps, nuts bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make:- BAJAJ Cat-Part No. BCLST 20W LED I or equivalent model of Havells, Philips or wipro.

S & F BEE five star rated energy efficient high speed ceiling fan having 1200mm blade sweep, air-flow not less than 210CMM, operating voltage 220-240V and frequency 50Hz, including a downroad of suitable size and electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make:- Crompton Cat- Part No. ENTRUST50 or Havells Cat-Part No. ES-50 or equivalent model of USHA or BAJAJ

S & F energy efficient non-metallic fresh-air fan having blade sweep 250mm , air delivery not less than 860 CMH, operating voltage 220-240V and frequency 50Hz, including electrical connection with 3 core flexible Copper conductor cable of appropriate size from ceiling rose to the fresh- air fan complete all as specified and directed. Make:- Crompton Cat-Part No. VENTILUS 10” or equivalent model of Usha, Havells or Bajaj

S & F Verticle Triple pole & neutral DB (double door), conforming to IEC 61439-3, suitable for flush mounting with 100A insulated & shrouded copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wire set and cable ties for cable management, IP 43 & IK 09 protection with provision for FP MCCB as incomer and TP/SP MCBs as outgoing, complete all as specified and directed. NOTES: [i] MCBs shall be measured and paid in relevant items

Vertical Triple pole & Nuetral MCCB DB,4 Way. Make:- Legrand, Schneider, L&T

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn= 10kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed by engineer-in-charge. Make:- Schneider, Legrand, Havells

32A,FP MCB,C-curve

32A,TP MCB,C-curve

32A,SP MCB,C-curve

20A,SP MCB,C-curve

16A,SP MCB,C-curve

6A,SP MCB,C-curve

32A,SPN MCB,C-curve

20A,SPN MCB,C-curve

16A,SPN MCB,C-curve

S&F moulded case circuit breaker(MCCB), 4 Pole, in single frame size upto 250A with thermal magnetic trip unit (TMD) compression lug connectors, protection against over loads(lr adjustable from 0.7-1Xln), protection against short circuits (lsd adjustable from 1.5-10 X lr), inbuilt encapsulated double break roto active type instantaneous protection, earth fault leakage protection, etc. having lcs=100% Icu as per IEC 60947-2 complete all as specified and directed by engineer-in-charge

32A,415 V,16 kA,50 Hz FP MCCB Make:- Schneider, Legrand, Havells

M & L for earthing complete with galvanized steel earth plate electrode of 60cm x 60cm x 6mm size, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire of size 4mm diameter as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 20mm diameter connected to earthing test point, all as shown in electrical plate No. 3, connected to earthing test point including testing on completion, excavation, PCC for earth pit of dimensions 550mm x 550mm (outer) and 300mm x 300mm (inner) and 250mm deep with a 10mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel etc all as specified and directed by engineer- in- charge. ( For VCB-02 nos., T/R- 2nos., Main utility panel- 02 nos., Block feeder panel -04 nos., Block utility panel- 04 nos.)

M & L for GI wire of 4mm diameter as earth lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed.

Harsh Infrastructure

K K Construction Co

Nitesh Enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO