Balance work for tomato shops & Auction platform (for 7 Nos of shops of size 6.00 M x 18.00 M) in the Market Yard, Kuppam

Fabrication, transportation and supply of 20 Mtrs Polygon High Mast with two sections of bottom 4mm thick and top section with 3mm thick of bottom 460mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 670mm dia 25mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M30 x 750 mm foundation bolts of required quantity and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands.ELEC-6.1.23

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands.ELEC-6.1.24

Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Foundation and erection charges with special T&P, for 12Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.67Mtr x 0.67Mtrs x 1.50 Mtr size M20 cc work vibrated concreting mixing with necessary steel (20kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.ELEC-6.1.33

Supply and transportation of 150 W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.MAT-03385

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.16 Sq mm X 4 core MAT-03420

(Rupees Nine Lakhs Twenty One Thousands Four Hundred Twenty Four and paise Sixty Six Only)

Filling basement with gravel broughtfrom approvedsources including cost and conveyance of allmaterials, labour charges, seignorage charges, filling charges, watering charges, tamping charges, including rolling with power roller 8 to 10 tonnes capacity etc complete for finished item of work as per standard specification.

P.C.C. (1:5:10) prop. Using 40mm HBG Machine crushed metal with screened sand including cost and conveyance of all materials to site from approved source, seigniorages charges, machine mixing, laying concrete in layers of 15cms. Thick well-compacted in position, curing for required period protecting the sides of foundation trenches whenever necessary and all incidental and operational charges and labour charges etc., complete as per standard specification referred and as per directions of the departmental officers

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 350 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, and confirming to clause 602.2.6.4 mixed in Concrete mixer 0.28/0.4 cum capacity with weigh batcher as per approved Nominal mix M20 Grade, laid with a fixed form paver/Manual Means, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades etc., as per MoRT&H specification No. 602 (5th Revision) and as directed by the Engineer-in-Chief

Painting with synthetic enamel paint in two coats of grade 1 quantity of approved brand and colour to Trusses, purlins, wind bracings, bottom runners, shutters, air-inlets, ventilators, channels etc.,including cost and conveyance all meterails labour charges etc., complete for finished item of work and as directed by the departmental officers.

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting to new walls with 2 coat of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

1. Supply and installation of 1000 LPH fully automatic plant with Reverse Osmosis Technology which consists of 2000 Lts raw water storage tank with two layers (Syntex or Nandi or oceon make) and F.R.P. 1354 multimedia vessel (Pentair / Aventura make) with auto multipurpose volve including requisite sand and carbon layers with raw water motor of 1.0 HP (CRI make) and 20” long slim model with micron cartridge filters and slim hosing with all necessary accessories with multi stage vertical high pressure pump (CRI-2-11 / Leo-2-9 model) with low and high pressure indicators and skid duly name board provision including stickering with electrical control panel board of GSM technology including 4” dia R.O membrane Pressure housing with all necessart accessories (UKL / Pentair make) and 4” dia R.O membrane (GE/Hydranautics / ginni make ) with anti scalent dozing pump (A-dose / E-dose make) with necessary accessories and flow meters, pressure gauges and flow sensors with necessary internal UPVC pipe line for protected water and PVC pipe line for raw water and waste water with required valves, tees, L-bows, couplings, unions and reducers etc., and separate pipe line for chilled water required taps (3 to 7 Nos.) for protected drinking water and internal electrification including cost and conveyance of all materials and all labour charges for transportation and installation charges etc., complete and interested bidders are requested to submit their competitive rates per plant warranty 2 years Supply, Errection & Commissioning of R.O.Plant 1000LPH

Manufacturing, supply and delivery and installation of water cooling cement of 600 litres per hour capacity, including cost and conveyance of all materials like compressor, alluminium body, 1/2 HP motor, gas cylinder with gas and panel board and all incidental and operational labour charges, such as installation and commissioning and testing etc., complete for the finished item of work for 600 lph cooling cement (water).

(Rupees Two Lakhs Thirty Thousands Eight Hundred and Seventy One Only)