Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹38.6 L
EMD Value
₹77,171
Closing Date
25 Nov 2026, 1:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (CIVIL)
FTR HQ BSF MEGHALAYA
Repair of damaged Indo Bangladesh border fence in AOR of BOP Adharghat and BOP Omkhawa of 2 Bn BSF under SHQ BSF Jowai Meghalaya Ftr
2026_BSF_932390_1
26/BSF/FTR/MEGH/2026-27
Open Tender
Civil Works
Works
300 days
In AOR of 02 BN BSF Under SHQ BSF Jowai
Please refer tender documents
2 documents required · 2 mandatory
₹0
₹77,171
30 Oct 2026
30 Oct 2026
26 Nov 2026
30 Oct 2026
25 Nov 2026
30 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | 39.55 | cum | 260.3 | ₹10,294.87 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 70.2 | cum | 7,878.5 | ₹5,53,070.7 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). | 25.27 | cum | 7,294.7 | ₹1,84,337.07 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 297.02 | sqm | 736.4 | ₹2,18,725.53 |
| 5 | Add Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973 on Total (i.e SL No. 01 to 04) Rs. 9,66,429/- | 1 | Each | 26,094 | ₹26,094 |
| 6 | Add cost Index @34.58% on Rs. 940335.00 | 1 | Each | 9,40,335 | ₹9,40,335 |
| 7 | Providing and Fixing Circular Hollow Section (CHS) post having external dia of 76.10 mm (±1%), thickness 3.60 mm (±10%) medium grade and having weight 6.42 kg / metre (±8%) with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM (inside plus outside) as per IS 2629/ASTM A123 / IS 4736 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005), total length of post 3.40 mtr provided at 2.50 mtr center to center, yard handling & stacking, hoisting and transportation of CHS post from factory to working site, embedding of the same upto 700 mm in cement concrete block of required size with M-60 grade cementious grout (non-shrink) in line, level & alignment as per drawing and as directed by Engineer-in-Charge. | 104 | Each | 4,485 | ₹4,66,440 |
| 8 | Providing and Fixing Straining Y-arms, for supporting concertina coil and for straining Razor wire by providing & employing six nos. SS -316 Eye bolts (M 8 x 100) with breakable head safety nuts & rod as shown in drawing , having weight 4.00 kg (±8%) each as per specified drawing , made up of MS angle 50 x 50 x 5 mm, one arm length 510 mm, welding as mention in drawing with 120 degree of angle of Y, with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005) fitted to CHS posts with proper sleeve caps (cap of 63.0 mm outer dia for straining Y arms being provided at every 30 metre C/C or as per site requirement as decided by Engineer-in-Charge and fixing arrangement of caps with two numbers SS-316 mushroom head bolts with breakable head safety nuts (M 8 x 120) to be provided as per attached drawings) made of 3.0 mm thick 63.0 mm OD 100 mm long MS tube welded to 90 mm dia 4 mm thick circular plate and with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/IS4736/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour, yard handling & stacking, hoisting and transportation of Straining Y-arms from factory to working site etc. all complete as shown in drawing and as per direction of Engineer-in-Charge. | 9 | Each | 2,195 | ₹19,755 |
| 9 | Providing and Fixing intermediate Y-arms for supporting concertina coil as specified in drawing , made up of MS angle 50x50x5 mm as per IS 1852 one arm length 510 mm, welded as mention in drawing with 120 degreee of angle of Y, with a support MS strip of 25mm x 5 mm (galvanised as per IS 4759), with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour (RAL 6005) fitted to CHS posts with proper sleeve caps {cap of 90 mm outer dia, 85 mm inner dia & 45 mm long. Intermediate Y arms will be provided at every post except the posts with straining Y-arm and fixing arrangement of caps with two numbers SS-316 mushroom head bolts with breakable head safty nuts (M 8X120 ) to be provided as per attached drawings} made of 4.00 mm thick MS strip and with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/IS 4759/ASTM A123 and thermoplast coating of minimum 400 microns (DFT) of specified colour. Weight of Y arm shall be 4.00 Kg (±8%) each, yard handling & stacking, hoisting and transportation of Straining Y-arms from factory to working site etc. all complete as per mention in drawing and as per direction of Engineer-in-Charge. | 95 | Each | 1,337 | ₹1,27,015 |
| 10 | Providing and Fixing High security weld mesh panel, wire mesh panel size 2667x955mm , weight 24.3 kg (±5%) of each panel having Mesh wire diameter 4.00 mm (± 0.05 mm), Mesh size 76.2mm (± 3.0 mm) x 12.7 mm (± 2.0 mm) (W x H) (tolerance of ±2 mm) with Hot dipped galvanised zinc (Zn) coating of minimum 100 GSM as per IS 2629/ASTM A123/IS 4826/EN 10244-2 & minimum 300 microns (DFT) of thermoplast coating of specified colour, reinforced by means of 2 nos. V - shapes bend in horizontal direction of the each panel of size as shown in the drawing, including overlapping of panel (75 mm over lap in horizontal direction and 167 mm overlap in vertical directions) including fixing with 7 nos. OMEGA clamps of size 178 mm x 35 mm x 3 mm and profile plates of size of 178 mm x 50.20 mm x 3.0 mm using two numbers SS-316 mushroom head bolts (M 8x35/50) with breakable head safty nuts and washers for fixing the mesh to the CHS post and fixing of mesh panels with each other at overlap location with IP Binder of size 160 mm x 25 mm x 3.00 mm with two slots with Hot dipped galvanised zinc (Zn) coating of minimum 360 GSM as per IS 2629/ASTM A123/IS 4759 and minimum 400 microns (DFT) of thermoplast coating including yard handling & stacking, hoisting and transportation of the same from factory to working site etc. all complete as per mention in drawing, as per manufacturer's specifications and as per direction of Engineer-in-Charge. (Cost of providing and fixing of OMEGA clamp with profile plates and its nut / bolts / washer etc. shall be paid seperatly & measurement shall be done for finished item of work). | 702 | sqm | 2,035 | ₹14,28,570 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.75 MB
BOQ_979825.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .