Establishment of CETP at Silk Tech Park Zakura

Removal/ dismantling of damaged flooring over floor by manual means including chipping, disposal of same 1x46x24.00=1104sft

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 12.5 mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm.

Providing and fixing of 12mm thick Nordic pine paneling with 30% designed ornamental wall tile paneling as high lighter, frame work with 12mm thick waterproof ply, melamine polish two or more than two coats complete job. 2x(54+26)x9.33=1492.80sft Ceiling=54x26=1404.00sft Deduction doors and windows 4x6.83x5.5=150.26 6x4.0x5.5=132.00 Door 1x4.5x7.5=33.75sft

Providing and fixing of conference table oval/u type made out of 19mm thick block board having imported kail wood members for supporting with whole structure of section 75x50mm , fixed with Deodar wood molding. The whole assembly should be made of 19mm thick block board, the top of the table shall be fixed with superior grade hard wood Planck & thick veneer dully melamine polish over it. The width of the table should be 27”the front of the table should be closed and shall be of same specification.

Office chair fully arms made from hard wood having 45mm thick high density foam on seat and 30mm for back covered with superior type cotton tapestry. seat frame shall be made out of size 450mmx430mm and back rest frame 430x250mm, seat height 460mmand back 840mmlegs made out of 50x50mm member, seat support stiffener 75x25mm, dully polished

VIP chairs ornamental type made out of walnut hard wood with superior quality of foam 5” thick for seat and 3” thick for back the cahair must have wood carving design and conforming all standards for VIP segment including dully polished.

Providing & fixing of coloured aluminum partition of 14gauge, panel sheet of approved quality /color 5mm thick in partion etc with EPDM rubber / neoprene gasket etc as per the direction of the concerned site engineer, approved quality/ color, with sliding doors, locks hinges complete job 70x8.00=560sft 20x10=200.00sft

Providing and applying of washable distemper of approved brand and quality two or more than two coats

Providing and fixing of crew curtains for doors and windows including all fixtures (curtain rods , holders )all complete. 316.01x2=632.02sft

Long nose tap of approved quality(jaquar, kerovit or equalvent)

Stainless steel reeling for stair of 304grade

Geyser of approved quality and make 50ltr.

Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required

Wiring for heating points (15/16A ) with 2x4sq mm /2.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm/2.5 sq mm FRLS PVC insulated copper conductor single core cable for loop earthling, all accessories. as required.

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 3 pin 5/6 A modular socket outlet and 5/6A modular switch, connections, etc on existing plates with all accessories as required

Supply, installation, testing and commissioning of 12 Watt LED recessed(round or square) Down lighters. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department.

Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans , incl. cost of extension of GI rod (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of making of space in walls/ windows as per site and necessary connections.

Supply, installation, testing and commissioning of 400mm sweep wall fans, incl. cost of ceiling rose and making of and necessary connections.

Wiring for circuit/ sub main along with earth wire with the following sizes of FRLS PVC insulated copper conductor ,single core cable in existing surface/reccessed medium class PVC conduit as required. a) 2 x 2.5 sq.mm + 1x 1.5 sq. mm earth wire

b) 2 x 4 sq.mm + 1x 2.5 sq. mm earth wire

c) 2x6sqmm +1x 4sqmm earth wire

Supply and fixing of following sizes of medium class PVC conduits along with accessories, recessed in walls, including cutting of walls and making good the same 25 mm dia

Supply and fixing of Double door surface/ recess mounting , Vertical/ Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. i. 8 Way (4 +24)

Supply, installation, testing and commissioning of 6-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP rating 240/ 415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.