Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC GARUBANDHA MISSAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹40.8 L+₹1.8 L (4.67%)Rejected-Finance HARIGAON PO NIKAMUL SATRA DIST SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹41.1 L+₹2.2 L (5.55%)Rejected-Finance VILL LAKHOPARA PO GARUBANDHA DISTT SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹41.4 L+₹2.4 L (6.12%)Rejected-Finance | L4 | Rejected-Finance Other Than Lowest Bidder | |
| 5 | L5₹42.6 L+₹3.7 L (9.37%)Rejected-Finance GARUBANDHA MISSAMARI DIST SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L5 | Rejected-Finance Other Than Lowest Bidder |
| Sl No | Description | Qty | Unit | M/S Sun Enterprises L5 | R D ENTERPRISE L4 | M/S Singha Enterprise L7 | Markson L2 | M/s AKRITI ENTERPRISE L1 | M/S N A CONSTRUCTION L6 | BEE KAAY TRADERS L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed. | 192 | Each | 100 ₹19,200 | 110 ₹21,120 | 80 ₹15,360 Lowest | 80 ₹15,360 Lowest | 160 ₹30,720 | 120 ₹23,040 | 80 ₹15,360 Lowest |
| 2.00 | Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed. | 112 | Each | 120 ₹13,440 | 110 ₹12,320 | 90 ₹10,080 | 90 ₹10,080 | 190 ₹21,280 | 150 ₹16,800 | 80 ₹8,960 Lowest |
| 3.00 | Taking down Shutters of any description exc 1.00 sqm and not 2.00 sq. m complete all as specified and as directed. | 10 | Leaf | 60 ₹600 | 60 ₹600 | 135 ₹1,350 | 25 ₹250 Lowest | 85 ₹850 | 40 ₹400 | 50 ₹500 |
| 4.00 | S & F Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. | 0.2 | Cum | 60,000 ₹12,000 | 70,000 ₹14,000 | 55,000 ₹11,000 | 48,000 ₹9,600 | 65,000 ₹13,000 | 60,000 ₹12,000 | 1,000 ₹200 Lowest |
| 5.00 | S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 165 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., including necessary prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and directed. | 25 | RM | 900 ₹22,500 | 400 ₹10,000 Lowest | 1,000 ₹25,000 | 980 ₹24,500 | 405 ₹10,125 | 900 ₹22,500 | 900 ₹22,500 |
| 6.00 | S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 125 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., including necessary prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and directed. | 243 | RM | 700 ₹1,70,100 | 400 ₹97,200 | 950 ₹2,30,850 | 900 ₹2,18,700 | 380 ₹92,340 Lowest | 980 ₹2,38,140 | 920 ₹2,23,560 |
| 7.00 | M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast, back filling of pressed steel door frame including necessary form work as required complete all as specified and directed. | 2.48 | Cum | 5,000 ₹12,400 Lowest | 6,000 ₹14,880 | 5,500 ₹13,640 | 5,600 ₹13,888 | 8,450 ₹20,956 | 6,000 ₹14,880 | 5,600 ₹13,888 |
| 8.00 | S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed. | 86.4 | Sqm | 1,600 ₹1,38,240 Lowest | 1,900 ₹1,64,160 | 1,650 ₹1,42,560 | 1,750 ₹1,51,200 | 1,850 ₹1,59,840 | 2,000 ₹1,72,800 | 1,800 ₹1,55,520 |
| 9.00 | S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 144 | Sqm | 2,300 ₹3,31,200 | 1,950 ₹2,80,800 | 2,300 ₹3,31,200 | 2,250 ₹3,24,000 | 1,900 ₹2,73,600 Lowest | 2,200 ₹3,16,800 | 2,100 ₹3,02,400 |
| 10.00 | S&F 25 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 5 | Sqm | 2,000 ₹10,000 | 1,500 ₹7,500 Lowest | 2,000 ₹10,000 | 1,900 ₹9,500 | 1,850 ₹9,250 | 1,800 ₹9,000 | 2,000 ₹10,000 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
22 Sept 2025, 6:00 pmClosed
GE MISSAMARI
PO-Missamari Dist-Sonitpur Assam
REPAIR TO JOINERY OF VARIOUS OTM ACCN AT NORTH OF RAILWAY LINE UNDER GE MISSAMARI
2025_MES_728834_1
8553/E8
Open Tender
Civil Works
Item Rate
270 days
GE MISSAMARI
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE MISSAMARI
₹90,000
Yes
8 Dec 2025
1 Sept 2025
24 Sept 2025
1 Sept 2025
22 Sept 2025
15 Sept 2025
1 Sept 2025 - 8 Sept 2025
Amount
Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed.
Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down Shutters of any description exc 1.00 sqm and not 2.00 sq. m complete all as specified and as directed.
S & F Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 165 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., including necessary prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and directed.
S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 125 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., including necessary prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast, back filling of pressed steel door frame including necessary form work as required complete all as specified and directed.
S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed.
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 25 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as specified in SSR Part I, Section 8 complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, & fixing in opening as specified in SSR Part I, Section 8 complete all as specified and as directed.
S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars,with frame, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed Note:- (i) Wire cloth /glass shall be measured and paid separately under appropiate items. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Fixing of shutters with fittings shall be as per manufacturers instructions.
S&F anodised aluminium three track sliding window shutters with frame (weight of section not less that 0.55 Kg/RM) aluminium section without sash bar aluminium section including all necessary joining cleats,hold fast, rubber gasket anodised snap beading, anodised aluminium fittings, suitable aluminum handle and locking arrangement etc, two track for glass and one track for aluminium wire mesh etc, including powder coated of any colour (thick of power coating not less than 50 micron) complete all as specified and directed.. Note:- (i) Wire cloth /glass shall be measured and paid separately under appropiate items. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Fixing of shutters with fittings shall be as per manufacturers instructions.
S&F Powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as directed. Note:-(i)Glass/wire guage as required shall be measured and paid seperately under appropiate item (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Fixing of shutters with fittings shall be as per manufacturers instructions.
S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and directed.
S&F 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 4mm thick frosted glass, one side, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Aluminum frame work complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair, 18/19mm thick Prelaminated particle board, interior grade, prelaminated particle board, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work, fixed with screws to timber frame work complete all directed.
S&F 30mm Width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or ectrogalvanised complete all directed.
S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F in repair, stainless curtain rod of 20mm dia thickness not less than 0.75mm, fixed with curtain rod holder fixed in walls with screws and finials caps complete all as specified and directed. Note: Curtain rod holder and finials caps is deemed to be inclusive in the Unit rate quoted rates)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/ rubbish from the site complete all as specified and directed.
M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) size of tiles 300mm x 300mm, in floors etc. set and jointed in cementitious tile adhesive and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in cementitious tile adhesive & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, complete all as specified and directed.
M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) size of each tile 600mm x 600mm, in floors etc. set and jointed in cementitious tile adhesive and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed.
Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site complete all as specified and as directed.
M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) including demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
M&L 20mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with and including liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed.
M&L preparation of new wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, over 1 mm thick wall care putty,complete all as per manufacturer's specification complete all as specified and directed.
M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed.
M&L Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for complete removal of existing finishes,preparation of old wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed.
M&L for complete removal of existing finishes preparation of old wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour,over 1 mm thick wall care putty,complete all as per manufacturer's specification complete all as specified and directed.
M&L preperation of new surfaces of ceilings and applying thee coat of white wash,complete all as specified and as directed
S&F in repair Anodised aluminium snap grid frame work for false ceiling,Size of grid 605 x 605mm, includinng Hangers 4mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, with and including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws, dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F in repair, Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing specified in SSR Part I, Section 8 complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing specified in SSR Part I, Section 8 complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, glazed with putty or fixed with beads not ecx 0.5sqm in each pane complete all as specified and as directed.
Markson (BID ID -3432199)
BEE KAAY TRADERS (BID ID -3432032)
R D ENTERPRISE (BID ID -3431744)
M/S Sun Enterprises (BID ID -3431567)
M/S N A CONSTRUCTION (BID ID -3432819)
M/S Singha Enterprise (BID ID -3431757)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .