Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.5 LAccepted-AOC 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | 1 | Accepted-AOC After deduction of Schedule of Credit for Rs. 5621.00 | |
| 2 | 2₹11.4 L+₹2.9 L (34.0%)Rejected-Finance VILL SILPATA POST OFFICE PITHORAGARH DISTT PITHORAGARH UTTARAKHAND 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | 2 | Rejected-Finance Other than L1 | |
| 3 | 3₹11.5 L+₹3.0 L (35.6%)Rejected-Finance | 3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | m/s RC punetha L2 | JAISWAL ENTERPRISES L1 | m/s MD pandey sons L3 |
|---|---|---|---|---|---|---|
| 1.00Repair to SOFA SET 5/4 SEATER WITH CUSHION | ||||||
| 1.01 | (a) Supply of foam cushion of size 21"x 22"x 100 mm thick of 32 density for sofa set 5 seater of make sleep well/Kurlon cushion of M/s Kurlon ltd duly covered with tapesty cloth of approved quality and shade complete all as specified and directed
Note :- Rate of tapestry cloth not less than that 220.00 per meter and standard width quality and shade shall be approved by GE | 50 | Each | 1,100 ₹55,000 | 700 ₹35,000 Lowest | 1,250 ₹62,500 |
| 1.02 | (b) Supply of foam cushion of size 21"x 22"x 100 mm thick of 32 density for sofa set 4 seater of make sleep well/Kurlon cushion of M/s Kurlon ltd duly covered with tapesty cloth of approved quality and shade complete all as specified and directed
Note :- Rate of tapestry cloth not less than that 220.00 per meter and standard width quality and shade shall be approved by GE | 20 | Each | 1,100 ₹22,000 | 700 ₹14,000 Lowest | 1,250 ₹25,000 |
| 1.03 | (c) M & L for repolishing of complete exposed surfaces of sofa chair 5 seater after preparation of surfaces with one coat of french polish complete all as specified and directed. | 5 | Each Set | 600 ₹3,000 | 250 ₹1,250 Lowest | 400 ₹2,000 |
| 1.04 | (d) M & L for repolishing of complete exposed surfaces of sofa chair 4 seater after preparation of surfaces with one coat of french polish complete all as specified and directed. | 5 | Each set | 500 ₹2,500 | 225 ₹1,125 Lowest | 340 ₹1,700 |
| 2.00Repair to Table Bed Side | ||||||
| 2.01 | a) Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of table, size as shown on drawing, ISI marked and including fixing 4 nos hard rubber plugs to be provided on the legs of table bed side Complete all as shown in drgs and as directed. | 120 | Each | 100 ₹12,000 Lowest | 100 ₹12,000 Lowest | 120 ₹14,400 |
| 2.02 | b) Removing of old U/S sides of table bed side and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed. | 120 | Each | 120 ₹14,400 Lowest | 200 ₹24,000 | 120 ₹14,400 Lowest |
| 2.03 | (c) S & F as in replacement of unserviceable handle with new chromium plated D type steel handle 75mm for table bed side of approved quality complete all as specified and directed | 70 | Each | 50 ₹3,500 Lowest | 50 ₹3,500 Lowest | 120 ₹8,400 |
| 2.04 | (d) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed. | 120 | Each | 75 ₹9,000 | 40 ₹4,800 Lowest | 50 ₹6,000 |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
30 Aug 2025, 6:00 pmClosed
CWE (HILLS) PITHORAGARH
HQ CWE (HILLS) PITHORAGARH POST OFFICE - BHARKATIA DISTRICT - PITHORAGARH STATE - UTTARAKHAND PIN 262520
CA NO. CWE/HILLS/PGH/77 OF 2025-2026 REPAIR OF STEEL/ WOODEN FURNITURE AT MIL STN DHARCHULA UNDER GE(MES) PITHORAGARH
2025_MES_724256_1
89266/25-26/E8
Open Tender
Civil Works
Item Rate
150 days
DHARCHULA
Class - E
8 documents required · 8 mandatory
₹500
GE (MES) PITHORAGARH
₹24,000
Yes
19 Sept 2025
2 Aug 2025
6 Sept 2025
2 Aug 2025
30 Aug 2025
16 Aug 2025
Amount
Repair to SOFA SET 5/4 SEATER WITH CUSHION
(a) Supply of foam cushion of size 21"x 22"x 100 mm thick of 32 density for sofa set 5 seater of make sleep well/Kurlon cushion of M/s Kurlon ltd duly covered with tapesty cloth of approved quality and shade complete all as specified and directed Note :- Rate of tapestry cloth not less than that 220.00 per meter and standard width quality and shade shall be approved by GE
(b) Supply of foam cushion of size 21"x 22"x 100 mm thick of 32 density for sofa set 4 seater of make sleep well/Kurlon cushion of M/s Kurlon ltd duly covered with tapesty cloth of approved quality and shade complete all as specified and directed Note :- Rate of tapestry cloth not less than that 220.00 per meter and standard width quality and shade shall be approved by GE
(c) M & L for repolishing of complete exposed surfaces of sofa chair 5 seater after preparation of surfaces with one coat of french polish complete all as specified and directed.
(d) M & L for repolishing of complete exposed surfaces of sofa chair 4 seater after preparation of surfaces with one coat of french polish complete all as specified and directed.
Repair to Table Bed Side
a) Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of table, size as shown on drawing, ISI marked and including fixing 4 nos hard rubber plugs to be provided on the legs of table bed side Complete all as shown in drgs and as directed.
b) Removing of old U/S sides of table bed side and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed.
(c) S & F as in replacement of unserviceable handle with new chromium plated D type steel handle 75mm for table bed side of approved quality complete all as specified and directed
(d) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Repair to Table dressing gents with mirror
(a) Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of dressing mirror, size as shown on drawing, ISI marked Complete all as shown in drgs and as directed.
(b) Removing of old U/S top and bottom sides of table dressing gents and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed.
(c) Removing of old U/S vertical sides of table dressing gents and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed.
(d) Removing US looking mirror and S&F of new looking mirror 5mm thick complete including wooden frame fixed with 6mm plywood back side of frame provided all as shown on drawing and as directed.
(e) S&F in repairs RAWL plugs of approved quality complete all as shown on drawing and as directed.
Repair to TABLE DINING 120x90 CM FD MAP-II/03
(a) S & F new table top for dining 120x90cm made of pre laminated MDF Board 18/19mm thick exterior grade in teak finish duly covered with half round PVC edgining in black colour or approved colour on open ends/all round/all around the table top irrespective of whatever is shown on drawing as in replacement of unserviceable/broken top complete all as specified, shown on drawing.
(b) S & F new leg of table dining 120x90cm made of shisham wood of size and shape/pattern as in replacement of unserviceable/broken leg complete all as specified shown on drawing and directed
(c) S & F new front/rear rail of table dining120x90 cm made of shisham wood of size and shape/pattern as in replacement of unserviceable/broken rail complete all as specified shown on drawing and directed.
(d) S & F new side rail of table dining 120x90 cm made of shisham wood of size and shape/pattern as in replacement of unserviceable/broken side rail complete all as specified shown on drawing and directed.
(e) M & L for repolishing of complete exposed surfaces of table dining after preparation of surfaces with one coat of french polish complete all as specified and directed.
Repair to CHAIR DINING
(a) Recanning of Chair dining with white plastic cane 4 mm wide gola type shah/premier brand, weaving shall be done in godrej pattern not more than 10 knots in one chair complete all as specified and shown on drawing including removing of unserviceable cane and cleaning the Surfaces for recanning complete all as specified and directed.
(b) M & L re-polishing of complete exposed surface of cahir dining after preparation of surface with one coat of french polish all as specified and as directed.
(c) S & F of new PVC seat for chair dining and removing/replacement of old unserviceable complete all as specified and shown on drawing and directed by GE.
(d) M&L for flat iron of 540 mm long, 25 x 3mm strip supporting to base of chair dinning complete all as specified and as directed.
(e) M & L re-polishing of complete exposed surface of cahir dining after preparation of surface with one coat of french polish all as specified and as directed.
CHAIR EASY
(a) M & L re-polishing of complete exposed surface of chair easy after preparation of surface with one coat of french polish all as specified and as directed.
(b) Recanning of wooden/steel furniture as per the requirement with white plastic cane 2 to 2.5 mm wide gola type shah/premier brand, weaving shall be done in godrej pattern not more than 10 knots in one chair complete all as specified and shown on drawing including removing of unserviceable cane and cleaning the holes for recanning complete all as specified and directed.
TEAPOY
(a) S & F of new teapoy top made of pre laminated MDF board 18/19mm thick exterior grade in teak finish duly covered with half round PVC edgining in black colour or approved colour on open ends/alll round/all around the table top irrespective of whatever is shown on drawing as in replacement of unserviceable/broken top and including fixing 4 nos hard rubber plugs to be provided on the legs of teapoy complete all as specified, shown on drawing complete all as specified and directed.
(b) M & L for repolishing of complete exposed surfaces of teapoy after preparation of surfaces with one coat of french polish complete all as specified and directed.
TABLE OFFICE CLERK WOODEN FD- DB-4120
(a) S & F new table top overall size 5'x3' made of pre laminated MDF board 18/19 mm thick exterior grade in teak finished duly covered with PVC edging in black or approved colour on all around the table top irrespective of whatever shown on drawing as in replacement of old unserviceable/broken top complete all as specified, shown on drg and directed.
(b) M & L for repolishing of complete exposed surface of table office officer's/clerk wooden after preparation of surface with french polish complete all as specified and directed.
(c) S & F new lock in replacement of old unserviceable lock to any type of table wooden with duplicate key as per size and shape complete all as specified and directed.
TABLE CENTRE
(a) S & F of new table top made of pre laminated MDF board 18/19 mm thick exterior grade in teak finished duly covered with PVC edging in black or approved colour all around as in replacement of old unserviceable/broken top including fixing 4 nos hard PVC Shoes to be provided on the legs of table centre complete all as specified, shown on drg and directed.
(b) S & F new leg of table Centre made of shisham wood of any shape/pattern as in replacement of unserviceable/broken leg complete all as specified, shown on drg and directed.
(c) All as per item No. 9.02 above but new front/rear rail of Table Centre complete all as specified and directed.
(d) All as per item No. 9.02 above but new side rail of Table Centre complete all as specified and directed.
(e) M & L for repolishing of complete exposed surfaces of table centre after preparation of surfaces with one coat of french polish complete all as specified and directed
TABLE PEG
(a) S & F of new table top made of pre laminated MDF board 18/19 mm thick exterior grade in teak finished duly covered with PVC edging in black or approved colour all around as in replacement of old unserviceable/broken top including fixing 4 nos hard PVC Shoes to be provided on the legs of table peg complete all as specified, shown on drg and directed.
(b) S & F new leg of table peg made of shisham wood of any shape/pattern as in replacement of unserviceable/broken leg complete all as specified, shown on drg and directed.
(c) All as per item No. 10.02 above but new front/rear rail of Table Peg complete all as specified and directed
(d) All as per item No. 10.02 above but new side rail of Table Peg complete all as specified and directed.
(e) M & L for repolishing of complete exposed surfaces of table peg after preparation of surfaces with one coat of french polish complete all as specified and directed.
CHARPOY GI PIPE WITH PLY TOP
(a) Taking out unserviceable ply wood top from charpoy plywood top and s & F 12 mm thick plywood topp commercial type BWR grade with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet and including fixing 4 nos hard wooden shoes to be provided on the legs of charpoy complete all as specified and directed.
(b) S & F 1884 mm long 32 mm bore ISI marked GI pipe medium grade long rail including threading on both ends (one side 22mm and another side 44mm) and fixing the same to charpoy GI pipe complete all as specified and directed.
(c) Converting of broken long rail retrieved in replacement from item No. 11.02 here in before into two short rail of size 804 mm long threading on both ends upto 22 mm and fixing the same to charpoy GI frame complete all as specified and directed
(d) Converting of broken short rail retrieved in replacement from item No. 11.02 here in before into two legs of size 400 mm long threading on both ends upto 22 mm and fixing the same to charpoy GI frame complete all as specified and directed
(e) S & F in replacement three ways GI Elbow 32mm size 60mm long make Jolly/RK/ISI marked as approved by GE complete all as specified and directed
(f) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed
(g) Preparation of legs of GI pipe out of broken short rail after cutting and threading and made suitable for fixing . Rest as directed
CHARPOY STEEL WITH PLY TOP
(a) Taking out unserviceable ply wood top from charpoy plywood top and s & F 12 mm thick plywood top BWR grade make Archid/Century ply/Green ply with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet including tightening/assembling of loose frames/componenet and including fixing 4 nos hard rubber shoes to be provided on the legs of charpoy complete all as specified and directed
(b) All joints welding & fixing shall be done in accordance with the standard work manshop/specification the welding joints shall be filled smooth before application complete all as specified and directed
(c) Paint painting shall be done with two coats of synthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed
(d) 6 Nos of MS Plate of size 25x60MMx6mm MS Cleat welded frame to support ply
(e) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed
CHAIR VERANDAH STEEL
(a) Removing of old unsv plastic cane from chair verandah and recaning to seat & back by 4 mm wide half round oval shape plastic cane and including fixing 4 nos hard rubber shoes to be provided on the legs of chair verandah rest all as specified and shown on drg and directed
(b) M & L for steel painting of complete exposed surfaces of chair verandah steel after preparation of surfaces with one coat of synthetic enamel paint complete all as specified and directed
ALMIRAH LARGE/MED STEEL WITH SELVES/LOCKER BED SIDE STEEL
(a) Removing of dent and bent and preparation the old painted surface of Almirah large steel as per as per drawing no. FD-1031 67 (M) esternally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, applying putty and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey with spray machine complete all as specified and directed
(b) All as per item No. 14.01 herein before but internally with shelves complete all as specified and directed
(c) Removing of dent and bent and preparation the old painted surface of Almirah Med steel as per as per drawing no. FD-1032/ 67 (M) externally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, applying putty and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey with spray machine complete all as specified and directed
(d) All as per item No. 14..03 herein before but internally with shelves complete all as specified and directed
(e) Removing of dent and bent and preparation the old painted surface of Locker bed side steel as per as per drawing No. 1029 externally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, applying putty and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey with spray machine complete all as specified and directed
(f) All as per item No.14.05 here in before but internally with shelves complete all as specified and directed
(g) S & F as in replacement of unservicealble lock with new lock having duplicate key of same size/specification to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed.
(h) S & F as in replacement of unserviceable handle with new chromium plated steel handle of same size /specification to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed.
(j) S & F new chromium plated hasp & staple of same shape and size dixing the same appropriate size of nut & bolt to locker bed side FD-1029 wherever reqd as inreplacement of old/unsv as shown on drg and directed.
(k) S & F as in replacement of unserviceable locking device set complete including locking bar, lever and cover with 3 way new locking device set to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed
(l) S & F as in replacement of unserviceable/broken aluminium hanging rod with new chromium plated steel hanging rod of 19 mm dia and 1 mm wall thickness with one pair of fixing brackets to Almirah large steel/Medium/small stee//Locker bed side steel of approved quality complete all as specified and directed
CHAIR CB STEEL WITH ARMS
(a) Removing existing unserviceable seat of chair CB steel with arms. Cleaning rebated portion and welding wherever required, smoothing with emery paper and painting with one or more coat required with synthetic enamel paint OG to steel frame complete all as specified and directed.
(b) Supply and fixing of new seat of chair CB steel with arms made out of 1st class hardwood (Shisham) duly painted and canning with cane plastic 2 to 2.5 mm thick Godrej pattern and border with 4 mm cane plastic and fixing the same with appropriate size of nuts & bolts to steel frame as shown on drg and as directed.
(c) S & F New back rest frame for steel chair CB with arms steel made of 2nd class hardwood of size 480x350mm/440x380mm/460x360mm duly painted complete all as specified and directed.
(d)Removing of existing unsv pvc shoes & PVC plug of chair CB steel with /without arms and S & F new shoes with screw at botom of steel frame and steel frame and PVC plug at notches holes at top complete al as shown in drg complete all as specified and directed.
(e) S & F flat iron strip 500x25x3 mm 4 Nos under each seat and 02 Nos of each back of chair fixed with running welding to steel frame duly providing holes for screws and all as directed by Engr -in -charge
m/s RC punetha (BID ID -3395822)
m/s MD pandey sons (BID ID -3409056)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .