Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.0 L
EMD Value
₹5,950
Closing Date
28 Oct 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER (W/S) , GRWW
OFFICE OF THE EXECUTIVE ENGINEER (WATER SUPPLY) GARDEN REACH WATER WORKS, BIDHANGARH, KOL-66
RENOVATION OF WATCH TOWER NEAR 18 MG UGR ADJOIING PIPE STACKYARD AREA ALONGWITH ERECTION OF FENCING WORK AROUND RAW WATER VALVE CHAMBER OF 25 MGD WTP INSIDE GRWW CLEAR WATER COMPLEX.
2026_KMC_1044649_1
EEWS/KMC/GRWW/26-27/49
Open Tender
MECHANICAL
Percentage
15 days
INSIDE GRWW
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹5,950
6 Oct 2026
6 Oct 2026
30 Oct 2026
6 Oct 2026
28 Oct 2026
6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | MS PLATE AS PER IS: 2062-2011/LATEST REVISION, MAKE: SAIL/TATA
ABOVE 2 MM UPTO 10 MM THICKNESS | 176.63 | KILOGRAM | 73 | ₹12,893.63 |
| 2 | I.S.M.C AS PER IS: 2062-2011/LATEST REVISION, MAKE: SAIL/TATA/JINDAL
UP TO 200X75 | 1,572 | KILOGRAM | 60.38 | ₹94,917.36 |
| 3 | I.S.A AS PER IS: 2062-2011/LATEST REVISION, MAKE:
UP TO 100X100XDIFFERENT THICKNESS | 162 | KILOGRAM | 54.6 | ₹8,845.2 |
| 4 | Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. (Payment to be made on area of cut surface) | 4,450.38 | SQUARE CENTIMETER | 8 | ₹35,603.04 |
| 5 | Welding in M.S.structural work with gas or electric: (a) Tack weld | 265 | POINT | 9 | ₹2,385 |
| 6 | Welding in M.S.structural work with gas or electric: (B) Continuous Weld | 2,488 | PER CM RUNNING | 9 | ₹22,392 |
| 7 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) | 100.65 | SQUARE METER | 29 | ₹2,918.85 |
| 8 | Coating of 'Epoxy' Resin of thickness not less than 160 micron with a lowviscosity,crystallization-resistant epoxy resin base with a reactive
diluents combined with high build epoxy amine adducts as per BS 5493
standard and a polyamide or amido polyamine or any other suitable
hardener. It shall react with epoxy resin at normal ambient temperature,
suitable for solvent-free coatings as per recommended proportion for use
on metal,concrete and wood surface to protect from corrosion as well as
damagefrom chemical reaction after making the surface free from dust, oil
and moisture etc. all complete as per instruction and to the satisfaction of
ElC. [This item will be operated on prior permission from the | 100.65 | SQUARE METER | 449 | ₹45,191.85 |
| 9 | FENCING WITH WELDED STEEL WIRE FABRIC 75 MM X 50 MM
PROVIDING 1.20 M HIGH FENCING WITH ANGLE IRON POSTS 50 MM X 50 MM X 6 MM AT 3 METER CENTER TO CENTER WITH 0.40 METER EMBEDDED IN M15 GRADE CEMENT CONCRETE, CORNER, END AND EVERY 10TH POST TO BE SHRUTTED, PROVIDED WITH WELDED STEEL WIRE FABRIC OF 75 MM X 50 MM MESH OR 75 MM X 25 MM MESH AND FIXED TO IRON POSTS BY FLAT IRON 50X5 MM AND BOLTS ETC. COMPLETE IN ALL RESPECT. | 50.6 | METER | 447 | ₹22,618.2 |
| 10 | Sub Total | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.34 MB
BOQ_2561894.xls
BOQ • 0.35 MB
tbid49.pdf
Tender Documents • 0.57 MB
OIDDETAILS.pdf
Additional Documents • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .