Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 L
EMD Value
₹4,000
Closing Date
22 Oct 2026, 5:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE
Executive Engineer JS Division Baggi Distt. Mandi H.P.
as per BOQ
2026_HPIPH_145628_1
EE-JSD-BGI-TA-Tender/2026- 18753-803 dt. 12/10/2026
Open Tender
Civil Works
Item Rate
90 days
Baggi
as per NIT
6 documents required · 6 mandatory
₹350
₹4,000
14 Oct 2026
14 Oct 2026
23 Oct 2026
14 Oct 2026
22 Oct 2026
14 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations trenches etc. (for pipes and pits) upto all depths in all kinds of soil such as pick work, jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of itsoriginal conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects. | 135.15 | Cum | - | - |
| 2Repair & Maintenance of Gravity Main / Rising Main by Cutting with One Cut and Welding 3 Layers of G.I. Pipe diameter mentiond below i.e. by Butt Welding with gas welding three layers including cost of cutting of G.I. Pipe and carriage of welding set / DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts. | |||||
| 2.01 | 150 mm dia | 34 | Joints | - | - |
| 2.02 | 125 mm dia | 25 | Joints | - | - |
| 2.03 | 100 mm dia | 20 | Joints | - | - |
| 3Dismentalling of old GMS tubes from trenches etc. (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge. | |||||
| 3.01 | 25mm dia | 310 | Rmt. | - | - |
| 4Relaying, jointing, testing and Carriage of old GMS tubes from trenches etc. (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge | |||||
| 4.01 | 25mm dia | 310 | Rmt. | - | - |
| 5Laying, jointing, testing and Carriage of GMS tubes (Light Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
FORM6_3.pdf
Tender Documents • 0.62 MB
TC.pdf
Tender Documents • 0.15 MB
BOQ_216954.xls
BOQ • 2.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .