CERTAIN REPAIR TO FLOORING CEILING KITCHEN CABINET DRAINS TILINGS AND OTHER MISC WORKS IN OFFICERS QTRS AREA IN NORTH COMLEX UNDER AGE BR II AT IMA DEHRADUN

Amount

Demolition of brick or stone masonary built in cement mortar including pre cast articles complete all as directed.

Brick work with sub class 'B' (old size) bricks, straight or curved on plan, exc 6 mtr mean radius built in CM 1:6 complete all as directed.

Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as directed.

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete including demolition of exising cement concrete all as directed.

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork demolition of existing old cement concrete complete all as specified and directed.

75mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in hardstanding, finishing the concrete surface even and smooth without using extra cement including necessary formwork and demolition of existing old cement concrete complete all as specified and directed.

Chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the surface of tiles over and including 15mm thick screed bed in CM 1:4 and dismantling of existing tiles of any description or position complete all as directed.

Granite stone of any colour (of any type) 20mm thick machine cut, as in floors and like bedded with and including 20 mm thick screed bed in CM (1:4) and jointed with grey cement slurry, and pointed with admixture of pigment to match with shade of granite stone including grinding and polishing and dismantling of existing stone slabs complete all as directed.

Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in cooking platform with and including 20 mm thick cement screed in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including grinding, rounding & mirror polishing of edges and dismantling existing stone slab/tiles of any description or in any position complete all as directed

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as directed

Machine cut Kota stone slab flooring 20 mm thick laid over and including 20mm screed bed in CM 1:4 laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including grinding,rubbing and polishing mirror finish and dismantling of the existing kota stone flooring of any description etc complete all as directed.

Vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 and dismantling of existing floor tiling and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 and dismantling of existing floor tiling and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 and dismantling of existing floor tiling and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 300x450x 7mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile with and including 10 mm thick rendering in cement mortar 1:3 finished rough and dismantling of existing wall tiling and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile with and including 10 mm thick rendering in cement mortar 1:3 finished rough dismantling of existing wall tiling and cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed

25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in floor and finishing the concrete surface fair and rough including demolition of existing old cement concrete floors etc complete all as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as directed

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as directed (work to be carried upto a height of 7.5 meters)

Rendering 15mm thick plaster on othe than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as directed

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of cement primer on walls complete all as directed (work to be carried upto a height of 7.5 meters).

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as directed.

Taking down shutter of any description exc 1 sqm and not Exc 2 sqm each complete all as directed

35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as directed.

30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as directed.

2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as directed

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as directed.

Prepration of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamle paint over one coat of pink primer complete all as directed.

Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.

150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat in repair complete all as specified and directed.

250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed

150mm long aluminium anodized, barrel tower bolts of extruded section complete all as directed.

18/19mm thick colour PVC prelaminated board fixed to timber frame work as in cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as directed.

Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed

Magnetic PVC catcher for kitchen cup board complete all as directed

25mm dia cupboard knobs of brass polished & fixed with screws etc complete all as directed.

Dismantling wrought iron or mild steel work of any description complete all as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as directed

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples fixed in repairs complete all as directed

Hacking out old broken glasses any thickness size quality or description from metal/wooden frame including punching or drilling out old glazing pins spring clips etc complete all as directed.

3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50sqm each pane complete all as directed.

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors, complete including taking down existing tubing all as directed

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors including taking down existing tubing complete all as directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI pipe light grade washout pipe 450mm long with plug and 20mm dia GI pipe light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as directed.

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI pipe light grade washout pip50mm long with plug and 20mm dia GI pipe light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as directed.

Rolled mild steel work as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with connecting plate etc. complete all as directed

0.63mm thick plain galvanized mild steel sheeting with grade of Zinc coating 120 fixed with "L"or "J" type hooks and washer as in ridges, hips, valley gutter etc including dismantling old sheets complete all as directed.

0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with "L"or "J" type hooks and washer as in roof, wall etc with grade of zinc coating 120 including dismantling existing sheets complete all as directed.

6mm thick cement corrugated or semi corrugated sheet in roofs fixed in repair with L or J type bolt complete all as directed.

Pre- painted galvalume aluminium Zinc coating GI based tile profile corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as directed.

Pre- painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding ridges to wall, fixed with self tapping screws etc complete including dismantling existing sheeting any type, gauge, thickness etc complete all as directed.

2nd class hard or soft wood as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as directed.

Preparation of new plastered or unplastered surface of ceiling and applying three coat of white wash complate all as directed

Preparation of new wooden surface n exc 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as directed

2nd class hard wood, plain fillet, bullnosed, splayed, chamfered or rounded on one edge, clean sawn, secured with nails, sectional area exc 3 sqcm but n.exc 6 sqcm complete fixed in repair all as directed.

4mm thick cement plain building boards fixed in ceiling to timber framework with screws including all accessaries and including dismantling existing boards any thickness including cover fillets etc complete all as directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gms) fixed in repair complete all as directed.

20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gm) fixed in repair complete all as directed.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI trap, concrete bedding and making good existing floor fixed in repair complete all as directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings fixed in repair complete all as directed.

PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as directed.

Chromium Plated single towel rail 600 mm long fixed with plastic rawl plugs & CP screws fixed in repair complete all as directed. Make- Jaguar ESSCO cat part No AEC-1111 or equivalent of Cera/Hindware

Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repair complete complete all as directed

15mm bore chromium plated hot & cold centre hole basin mixer with 'U' shape round casted spout with 450mm long braided hoses fixed in repair complete all as directed. Make- Jaguar ESSCO cat part No MQT-516A or equivalent of Cera/Hindware

15mm bore chromium Plated hot & cold wall mixture for mixing hot & cold water with 115mm long bend pipe for connecting to overhead shower (with bush & piston divertor fittings) with aerator etc fixed in repair complete all as directed Make- Jaguar ESSCO cat part No MQT-517B or equivalent of Cera/Hindware

15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repair complete all as directed. Make- Jaguar ESSCO cat part No MQT-512 or equivalent of Cera/Hindware

100mm dia chromium plated grating with hole fixed in repair complete all as directed.

Overhead shower 80mm dia round shape single flow (ABS body and face plate chrome plated) fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No EQS-541N or equivalent of Cera/Hindware

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed

Corner glass shelf with bracket complete all as specified and directed. Make: Jaguar cat part no CAN 1173 or equivalent or equivalent to Marc Zoloto

Glass shelf 600 mm long complete all as specified and directed. Make: Jaguar Cat Part No CAN 1171N or equivalent to Marc Zoloto

1 mm thick stainless steel plate rack size 785x900mm as per sample kept in GE's office fixed in repair complete all as specified and directed.

Kitchen sink with drainage board made of stainless steel 1mm thick with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing cantilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm fixed in repair complete all as directed.

Drapery rod fixed in repair in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58 mm complete all as directed.

Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod fixed in repairs complete all as specified and directed

Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

Attending complaints for building work (Complaint) on daily basis related to plumbing/water supply which includes minor repair to taps by replacement of washers, tightening of taps, stop cock, angle valve, pillar cock mixer etc. tightening of checknuts of PVC Connections and waste pipe of WHB, urinals, sink and making water supply functional in case of blockage, repair/ replacement of face of mohra grating, etc.complete all as specified and directed Note - 1. Replacement of washers taps, stop cocks, angle cock, pillar cock, mixer, PVC Connection/ face mohras of any description and PVC Waste pipe shall be paid separately as supply only under relevant items of BOQ. 2. Contractor has to obtain completion of complaint from user duly signed with date from the user with Quarter number and submit the same to JE / Engineer-in-charge.

Supply only PVC washers for 15/20mm taps/ stop cock

Supply only 15mm bore short body fancy type bib tap chromium plated complete all as specified and directed Make- Jaguar ESSCO cat part No MQT-511 or equivalent of Cera/Hindware

Supply only chromium Plated fancy type Angle valve 15mm dia (angle cock) complete all as specified and directed Make- Jaguar ESSCO cat part No MQT-526 or equivalent of Cera/Hindware

Supply only 15mm Stop cock, CP fancy type complete all as specified and directed. Make- Jaguar ESSCO cat part No TOT-1513A or equivalent of Cera/Hindware

Supply only PVC Connection 15 mm bore with CP brass nuts at ends for iron pipe 15mm bore 450mm long complete all as specified and directed

Supply only PVC waste pipe 32mm dia suitable for Low level PVC cistern/WHB complete all as specified and directed

Supply only 15 mm bore chromium plated hot & cold sink mixer with swinging casted spout complete all as specified and directed. Make- Jaguar ESSCO cat part No MQT-527 or equivalent of Cera/Hindware

Repairs to GI Tubing with and including necessary supply of GI fittings (GI Elbow, socket, union socket etc.) required as per site requrement of 15 mm bore including chasis cutting where required complete all as directed.

Repairs to GI Tubing with and including necessary supply of GI fittings (GI Elbow, socket, union socket etc.) required as per site requrement of 20 mm bore complete all as directed.

Attending complaint for building work (Complaint) on daily basis related to Carpenter work, which includes minor repair to door, replacement of glass panes, tightening of wire cloth, tower bots, bow handles, butt hinges etc.easing of doors, wooden chowkats, any description, making them functional to the satisfaction of AGE complete all as specified and directed Note - 1. Replacement of glass panes, tower bolts, butt hinges, sliding door bolt, oil putty, wire cloth shall be paid separately as supply only under relevant items of BOQ. 2. Contractor has to obtain completion of complaint from user duly signed with date by the user with Quarter number and submit the same to JE / Engineer-in-charge.

Supply only Mild steel butt hinges 100 mm long medium weight with screws complete all as directed.

Supply only aluminium, anodised, cost type handles 150 mm with screws of extruded section complete all as directed.

Supply only aluminium, anodised, cast type handles 100 mm with screws of extruded section complete all as directed.

Supply only aluminium, anodised, barrel tower bolts 150 mm with screws of extruded section complete all as directed.

Supply only aluminium alloy, anodised, sliding door bolt with hasp, 250mm long, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as directed.

Supply only sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane 3 mm thick complete all as directed.

Supply only Oil Putty best quality locally available complete all as specified and directed

Supply only galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as directed.

Repair to mild steel doors/window with and including necessary welding and repalcement of hinges, handles, peg stay and making wondow operational complete all as specified and directed

Steel window box type double shutter (glazed and wire gauge) with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bar dovetailed or welded with and including 10mm square window guard bar as per Drg No 088 Sheet 1/17 to 17/17 complete and one shop coat of red oxide primer including taking down existing window complete all as specified and directed

Repair to wall seepage by taking down existing palster of the defective area, replacement of defective piece of water pipe line incluidng all fitting as required and directed, applicaiton of tape crate and rendering 15mm thick plaster in CM 1:4 and applying two coat of finishing coat as per existing finish complete all as directed

Repair to wooden flooring 15 to 20 mm thick by dismantling defective portion and replacing with new one to match with exisitng wooden floor inclusive all necessary items required for replacement of exisitng defective wooden flooring, skirting and threshold pieces as required complete all as directed

Repairs to aluminium doors exc 1.50 sqm but n exc 5.00 sqm by necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc and refix in the same opening after complete repair except glass complete all as specified and directed

Repairs to aluminium doors n. exc 1.50 sqm by necessary joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc and refix in the same opening after complete repair except glass complete all as specified and directed

Hand shower (Health Faucet) (ABS Body) with 1.2 Metre long PVC Tube & Wall Hook etc fixed in repaircomplete all as specified and directed Make- Jaguar ESSCO cat part No ALE-ESS-583 or equivalent of Cera/Hindware

PVC tank Lid for 500/1000 Ltr cpacity to the existing water tank in any postion fixed in repair complete all as specified and directed

Door closor hydraulically regulated, aluminium (Die cast body) designation No 3 universal type suitable for door shutters of any width and weight fixed in repairs complete all as directed.

300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat in repair complete all as specified and directed.

Plastic water closet seat cover coloured pattern with flat bottom and cover mild steel CP hinging device fixed in repair complete all as specified and directed

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded n. exc 6 mmcomplete all as specified and directed

Repairing to existing door/ window chajjas upto 2.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating complete all as specified and directed

Sharda Enterprises

M/S RAJESH KUMAR GOYAL