SPECIAL REPAIRS TO TYPE-V QUARTER INCLUDING SERVANT QTR KV NO 2 VADODARA UNDER GE (A) BARODA.

Amount

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

Roughening of old unservicable PCC floor surface by picking, chipping and sweeping clean with wire brush and washing down with water to remove dust and make it suitable for laying floor tile and disposing debris outside MD land all as specified and directed by Engr- in Charge.

M&L for non skid coloured joint free ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm , as in floors etc set over of pigment matching to tile color including screed bed or bedding layer in CM 1:6, 15 mm thick for laying floor finishes (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M&L for Vitrified coloured joint free ceramic tile 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm , as in floors etc set over of pigment matching to tile color including screed bed or bedding layer in CM 1:6, 15 mm thick for laying floor finishes (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M&L for Vitrified coloured joint free ceramic tile 9 to 10 mm thick area of each tile exceeding exceeding 0.18 sqm but not exceeding 0.36 sqm , as in skirting/dado etc set over of pigment matching to tile color including 10 mm thick rendering as in vertical serfaces of wall finishes with CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for Glazed ceramic coloured walls tiles in vertical surfaces 350x 250x 6 mm to 7mm/ 450X 300X 6mm to 7mm thick set over of pigment matching to tile color including 10 mm rendering for vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge).

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 10 mm thick plastering with cement mortar 1 : 4 complete all as specified

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15 mm thick screed bed with cement mortar 1 : 4 complete all as specified

M & L for machine cut kota stone slab flooring 20 - 25mm thick set over and including high performence adhisive manufactured by somani ezifix tile adhisive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementious grout manufactured by somani ezy grout with CM 1:6 all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry with grey cement and pigments including 15 mm thick screed bed with cement mortar 1 : 4 complete all as specified

M & L for 100mm thick plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base complete, all as specified & directed.

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, chullah hood and similar suspended work

M & L for Cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges.

Taking down cement plaster on brick/concrete surface including raking out joints hacking for key scrubbing down with water etc.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M & L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

M & L for brickwork with sub class ‘B’ bricks straight or curved to any radius in half brick thick walls built in CM 1:4

M & L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 finished even and smooth (without using extra cement)

M&L for Rendering 15 mm thick in two layer on fair faces of brick work or concrete external sur-faces of wall, 5 mm thick in CM 1:4 mixed with liquid WPC as per manufactrure instruction, finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately).

M & L for Rendering 5 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:4 finished even and smooth (without using extra cement)

Supply only liquid water proofing compound all as specified and directed.

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.

M & L for complete removal of existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.

M& L for complete removal of existing treatment on wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.

M& L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash.

M & L for preparing old plastered surfaces of ceiling and applying two coats of white wash on ceiling to match the existing surfaces.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, including 6mm thick external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.

S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed

S & F 150 mm size extruded aluminium alloy handles, febricated type anodised

S & F 300 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters

S&Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).property of being ermite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/SS dash fasteners of required dia and length all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F in repair 18mm thick HDHMR BOARD exterior grade including white coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century.

S&F in repair stainless steel cabinet/drawers handle having a length of 150mm and shape all as specified and directed.

S&F in repairs SS 304 Cup & Saucer basket of size 470x485x100mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 5913 of Godrej or other equivalent as approved by GE.

S&F SS 304 Perforated cutlery basket of size 470 485x100mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 5906 of Godrej or other equivalent as approved by GE.

S&F SS 304 Three shelf pull out of size 200x485x530mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6144 of Godrej or other equivalent as approved by GE.

S&F SS 304 Grain trolly of size 525x485x350mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6175 of Godrej or other equivalent as approved by GE.

S&F Thali Plate basket SS 304- 21*20 of size 8- 520x485x150mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 6168 of Godrej or other equivalent as approved by GE.

S&F Plain Basket SS of Size 470x485x200mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 5904 of Godrej or other equivalent as approved by GE.

S&F anti rusting stainless unik cloth drying hanger made of 16mm dia hollow stainless rod , 8 feetx6 rods set for heavy duty pulley operater including fixing on ceiling with metal roof clamps all as specified and directed and approved by GE.

S&F in repairs Ball Bearing drawer channel 250mm of size all as specified and directed and approved by GE.

S & F SS W Hinges SS 202 Grade steel Rust Resistance , for fixing cup boards shutters sizes of hinges 3" to 4" and 1.5 mm thickness, suitable for 18 mm thick cabinets shutters complete all as specified and directed

S&F magnet door stopper of rectangular size for PVC cabinets including all fittings fixed complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished supplied and fixed.

S & F 125 mm aluminium alloy handles, cast type anodised all as specified.

S & F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod as directed

S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed

S&F of Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F of Powder coated aluminium window/ventilator shutters (minimum thickness of powder coating 50 micron), side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws and grill etc as per manufactures instruction & trade pactice.

S&F 4.00mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F 4.00mm thick figured glass, pin headed type and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M & L for 1 MM thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M & L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate to fix hold fast complete all as specified and directed.

M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Taking up or down 15mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S & F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

Refixing of old galvanised mild steel medium grade of dia 20mm bore tubing and connections in new or old position with all new fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Taking up or down 25mm bore steel tubing and connections, all as directed by Engr-in-Charge.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Dismantling cast iron pipes, jointed in cement mortar, 100 mm bore

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or in floors all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius all as specified and as directed.

Dismantling cast iron pipes, jointed in cement mortar ,75 mm bore

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or in floor all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F 110mm PVC (SWR) vent cowl all as specified and as directed

S & F 75mm PVC (SWR) vent cowl all as specified and as directed

S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.

S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.

S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed.

S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed.

S & F stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed

S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed.

M & L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specifed and directed.

S&F plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed.

S & F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule

S & F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed. Make : Cera/Prayag/Jaquar or equivelent make.

S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed

S & F in repairs 25mm dia bore gun-metal,globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S & F 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete

S & F in repairs 20mm dia brass chrom plated tubular towel rail complete.

S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe

Dismantling of water storage tank of 1000 ltrs capacity.

S & F 1000 Ltrs Rotational moulded polyethylene water storage tanks , triple layered (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed

S&F Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps,waste, chain and plug and porcelain stopper but including brackets all as specified.

Supply and fixing CP Centre hole Wash Basin mixer 15 mm bore pipe complete all as specified.

S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S & F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm including suitable waste coupling and waste pipe.

M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge . (Reiforcement will be measured and paid saperately under respective item.

Repairs by brushing of treatment to reinforcement by application of corrrosion resisting coat in two coats, suitable time to be provided between coats according to manufacturers instructions to resist further deteroriation of reinforcement etc complete according to intruction of eng- in - charge. Make Fosroc/piditlite or equivalent

Repairs by application of approved epoxy based bond coat on concrete surfaces or sound bonding of cold and new concrete surfaces according to instructions of engineer in chargeMake Fosroc/ pidilite or equivalent

Making of profile of structral memebers with polymer modified mortar in damaged areas 1:3(Cement:sand) mortar with 5 -10percentage addition of latex polymer,w/c ratio of 0.35 in 20 mm thk layers / including leveling etc complete . Make Fosroc/ Pidilite or equivalemt

M&L for Providing precast cement concrete Type B-1(1:2) using 20 mm aggregate, set in CM 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to matchcomplete all as specified and directed. (reinforcement shall be measured and paid separately)

M&L for Providing reinforced cement concrete (nominal mix)Type B0(1:2:4) using 12.50 mm aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note. (reinforcement shall be measured and paid separately)

M&L for complete removal of existing water proofing treatment including plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge

M&L for 50 mm avg thick PCC padding in cement concrete type B1 (1:2:4) using 20 mm graded stone aggr with water proofing compound @2% by weight of cement finished surface even and smooth without using extra cement for laying of WPT all as specified and directed. Note . (WPC will be measured and paid separately).

M&L for 10 mm thick plaster on roof surface with CM 1:3 mixed with water proofing compound @3% by weight of cement plaster surface should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying actetic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minimum 3.50 Kg/Sqm 3 mm thick (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge

M & L for brushing with neat cement slurry @ 3Kg/Sqm

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level)

M & L for 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and smooth without using extra cement

M & L for Forming 65mm deep x 10mm thick contraction (dummy joints), filled with sealing compound grade "A".

Taking down shutter exc 1 Sqm but n.exc 2 Sqm each

M&L for floor door stopper of aluminium body complete all as specified and as directed.

S & F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete all as directed.

S & F in repairs aluminum door seal of suitable section fixed to door shutter with screw complete all as specified.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

S & F in repair of sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed.

S & F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete all as directed.

S & F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete all as specified.

M & L for 25 mm thick cement concrete in flooring type B0, 1:2:4 (12.5mm graded aggregate) for laying floor tiles.

M&L for 40 mm thick cement concrete type B-1,1:2:4 (Using 20 mm graded aggregate) as in floor, finishing cement concrete surface even and smooth with out using extra cement.complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete.

M & L for PCC 1:4:8 type D2 using 40mm agg as in fdn, filling and mass concrete

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.

-do- but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders complete.

Form work to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk etc flat surface complete.

Formwork to sides of rough finished flat surfaces of concrete as in pillars, posts, struts, piers, columns, and stanchions etc complete.

M & L for reinforced cement concrete (Nominal Mix) Type B1 1:2:4, Using 20 mm aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.

M & L for reinforced cement concrete (Nominal Mix) Type B1, 1:2:4, Using 20 mm aggregates as in columns, pier, pillars beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil

Removing excavated material n.exc. 50m and depositing where as directed at a level n.exc. 1.5 m above the starting point.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc.

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge. incl cutting and chasing in stone/brick masonry as following:-

For one light/ fan point controlled by one switch

For one call bell point controlled by one push button switch.

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No 149 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by engir in charge.

S&F Modular switch, one way, 6 Amp 230, 1 module. All as specified and directed by engr in charge

S&F socket Modular 6 Amp-2/3 pin combined 2 module All as specified and directed by engr in charge

S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt All as specified and directed by engr in charge

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt . All as specified and directed by engr in charge

S&F ceiling rose, surface backlit,three terminal. All as specified and directed by engr in charge

S&F Modular lamp holder PVC/Polycarbonte type with back plate suitable for Angle/Batten fitting All as specified and directed by engr in charge

S&F modular fan step regulator 120W, 2 module. All as specified and directed by engr in charge

S&F bell push flush type one way 5Amp 240 Volt.All as specified and directed by Engr-in charge

S & F in repair/replacement bell ding dong 230 V, single phase.All as specified and directed by Engr-in charge

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects all as specified and directed. Make - Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

S&F LED bulb 10 watt suitable for angle / batten holder fitting. Make-Havells/Bajaj/Wipro

Taking down ceiling fan ,sealing cable end,dismantling blades and removing fan and blades to store and refixing/hanging in only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engr-in-Charge.

M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLSH, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete including necessary cutting chases all as directed by Engineer-in-Charge Note :- Two run of main wire and one run of earth wire incl conduit shall be measured as one length.

M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete including necessary cutting chases all as directed byEngr-in-Charge . Note :- Two run of main wire and one run of earth wire incl conduit shall be measured as one length.

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make Legrand/ L&T/Havells

S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make Legrand/ L&T/Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar including taking down.

S & F of ceiling fan complete with blades, down rod from existing roof / truss to fall ceiling, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed. Note : 1) Old unserviceable ceiling fans shall be deposited to KV School.

Supply and fixing LED light fitting Decorative wall mounting brushed nickel finish with acrylic diffuser suitable with 9 watt led lamp B22 base all as specified and Directed by Engir in charge.Make-Havells cat part no.LHFOAJE1TN1I060 OR equavalent.

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure . complete all as directed by Engineer-in-Charge .Make- Legrand/ L&T/Havells/hpl

M&L electric water heater (Geyser) 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed.Make - Racold /Usha /Havells Note : 1) Old unserviceable water heater shall be deposited to KV School.

M&L for provn of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

City Light (BID ID -3191132)

Shree Vaishno Enterprises (BID ID -3190314)