Govt Senior Seconday School at Ganoh Distt Kangra HP

Amount

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work. (a) Flat surfaces such as soffits of suspended floors, roofs inluding inclined surfaces up to any degree, landings and the like:(i) Floors, etc. upto 200 mm in thickness.

(b) Column pillar, posts and struts square, rectanagular or polygonal in plan.

(c) Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth.

Providing and laying cement concrete work 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curring complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads & lifts.(a) Column, pillars, posts and struts upto all heights

(b) Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Providing Tor steel/TMTsteel reinforcement for R.C.C. work including bending,binding and placing in position complete including cost of binding wire including carriage of material in all leads & lifts.

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg. of cement per sqm.of floor area before laying cement concrete flooring including roughening, cleaning, of the concrete surface complete including carriage of material in all leads & lifts.

2nd class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads & lifts.

Providing and fixing flush door shutters core of black board construction with frame of first class hard wood and well matched firtst class Indian teak ply veneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters including carriage of material in all leads & lifts.(i) 40 mm thick including black enamelled M.S. butt hinges.

Providing and fixing anodized aluminium sliding door bolt annodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.(a)300x 16 mm

Providing and fixing aluminium tower bolt (barrel type) annodized to transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts. (a)200x 10 mm

Providing and fixing aluminium handles annodized transparent or dyed to required colour or shade with necessary screws including carriage of material in all leads & lifts. (a)125 mm

Providing and fixing 250 mm. M.S. hooks and eyes including carriage of material in all leads & lifts.

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent (any size and colour) 10mm thick manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1cement: 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.

Making khurras 45x45cm with average minimum thickness of 5 cm. cement concrete 1:2:4 (1 cement :2 sand: 4 stone aggregate of 20 mm nominal size) finished with 12 mm cement plaster 1:3(1cement:3sand ) and coat of neat cement rounding the outlet complete including carriage of material in all leads & lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of material in all leads & lifts.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. including carriage of material in all leads & lifts.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of material in all leads & lifts.(a)100 mm dia pipe

Steel work welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads & lifts. (a) In gratings framed guard bars,ladders,railling,brackets and similar works.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15cm x10cm x 10cm size of 1:3:6 (1cement:3 sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including carriage of material in all leads & lifts. (Fixed Steel windows)

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15cm x 10cm x 0cm size of 1:3:6(1cement:3 sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including carriage of material in all leads & lifts. (Side hung windows)

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15cm x 10cm x 10cm size of 1:3:6 (1cement:3 sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including carriage of material in all leads & lifts. (Top hung ventilators)

Providing and fixing angle iron door,window,clerestory window frame manufactured from M.S.Angle iron section of 50x50x6 mm ,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50x25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads & lifts.(a) Enamel paint other than white/ white paint.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping including carriage of material in all leads & lifts.(a) with enamel paint other than white/ white paint.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equalized on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including and paper smooth complete including carriage of material in all leads & lifts.

6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.

15 mm cement plaster in single coat on fair side of brick / concrete/ stone walls for interior / exterior plastering upto all heights including arises, Internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth & finished even & smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads & lifts.

20 mm cement plaster in single coat on rough side of brick / concrete/ stone masonry for interior/ exterior plastering upto floor two level including arises, Internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads & lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall / ceiling surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of material in all leads & lifts.(i) In ceiling surface

(ii) In wall surface

Supplying and fixing glass pans with 2nd class deodar wood chamfered moulding 38x12mm along the pannels with nails complete in all respects including carriage of material in all leads & lifts.Plain glass 4mm thick.

50mm thick Cement concrete flooring 1:2:4 (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads & lifts.

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. / R.B. works including carriage of material in all leads & lifts.

ARUN KUMAR