PROVN OF JAFRI/COMPOUND WALL OF NO 02 DET WC IS GP AND CERTAIN SANCTIONED WORKS AT DHOLEWAL MIL COMPLEX UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil. Complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5 m depth for foundation & getting out, complete all as specified and directed by Engineer-in-Charge.

M&L for providing cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundation, filling and mass concrete. Complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with Fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6. Complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-In-Charge.

Providing precast cement concrete louvres and jallies,45 mm thick (measured solid), including all moulding type B0 1:2:4 ( 12.5 mm graded aggregate ) set in CM 1:4 ,complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed by Engineer-in-charge.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces,etc.,complete,drilled for fixing of steel sheeting or other covering .Doors,etc. to be prepared for hanging and sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering running rails and and guides ) and hanging ; also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specified and directed by Engineer-In-Charge.

M&L for RCC (Nominal mix) type B1 ,1:2:4 ( using 20 mm graded stone aggregate) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; Complete all as specified and directed.

M&L for RCC (Nominal mix) type B1 ,1:2:4 (using 20 mm graded stone aggregate) as in columns,post,pillars piers, post and struts, etc complete all as specified and dircted.

M&L for flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L for Formwork to square/reactangular sides of pillars, posts, struts, piers, columns, and stanchions fair and finished surface complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed by Engineer-In-Charge.

All as per item No 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders. Complete all as specified and directed by Engineer-In-Charge.

M&L for granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick bedding layer in CM 1:6 complete all as specified & directed by Engineer-in-Charge.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25cm for soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed of a level not exceeding 1.5m above the starting point. Complete all as specified and directed by Engineer-in-Charge.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 Ton all as specified and as directed. Make: Blue star/LG/USHA-Daikin/Voltas

Supply and fix for voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 4 KVA all as specified and as directed.

Supply and fix for single pole and netural enclousre with a two pin and earth plug and socket complete with one single pole MCB, 240V, 20 Amps. All as specified and as directed.

Supply and fix for factory made sheet metal enclosures SPN 4 way double door 240 V for DBs suitable for having MCB flush with wall complete all as specified and directed.

Supply and fix for MCB SPN 32 Amps 240V, C-curve, 50 Hz, breking capacity-10 KkA. Complete all as specified and directed.

Supply and fix for MCB SP 6 to 32 Amps 240V, C- curve, 50 Hz, breking capacity -10kA complete all as specified and directed.

M&L for sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity condoctor, drawn through and including 25mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/ceiling etc all as specified and as directed. Note:- Three run of wire shall be measured in one unit.

M &L for earthing including necessary earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC (1:3:6 ) C-1 cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

JAY ANN CONSTRUCTION COMPANY